Send Detail Information Inquiry screen and Receive Detail Information Inquiry screen

= Remarks =

The following explanation uses the Send Detail Information Inquiry screen as an example.

The screen configuration is the same as the Receive Detail Information Inquiry screen. When you read the description, replace the word "send" with "receive."

                                                                                
 <<Send Detail Information Inquiry>>     Ctr+s:Switch Screen     ESC:List screen


 File ID      : LOOPTEST
 Receive Host : UXserver

   Send Acknowledge Date: 12/29/2017 18:21:33
   Send Date            : 12/29/2017 18:21:33 - 18:21:33
   Status Code          : 0000-0000
   Record Count         : 454                   Data Size : 18160
   File Name            : /usr/tmp/snddata
   Transmission Rate    : 18160     Bytes/Sec.  Connection Type : LAN  IPVer: 4
   Compression Preference: None                 Compression Ratio : ---
   Code Conversion By   : No Conversion
   Transfer Block Length: 32768                 Transfer Block Count: 1
   Identifier           : B483BCEA7993A4B8A23C6847E5FA397332
   Transfer Identifier  :
               B483BCEA7993A4B8A23C6847E5FA397332000100000000000000000000000000
   Encryption Used      : -                     Interface DBID       :

   Comment       : LOOPTEST

Screen 4.10 Send Detail Information Inquiry screen

For details on how to display the screen, refer to Confirmation of the Send Detail Information.

Send Detail Information

<Explanation of each field>

Receive Host

The send destination host name is displayed.

Send Acknowledge Date

The time and date when Send File is acknowledged is displayed.

Send Date

The time and date when Send File is executed is displayed.

Status Code

The status code of the Send processing is expressed in the format of "status code-detail code."

Refer to Error Codes and Messages for more information on the status code and the detail code.

Record Count

The record count of the Send file is displayed.

Data Size

The data size of the Send file is displayed. The unit is byte.

File Name

The name of the Send file is displayed.

Transmission Rate

The data length transferred in one second is displayed. The unit is byte.

Connection Type

The connection type of the send destination host is displayed.

LAN:

LAN connection

IP Version

The IP version used for communication is displayed.

4:

IPv4

6:

IPv6

Compression Preference

The compression preference that is used for the transfer is displayed.

None:

Transfer data without using compression

Horizontal:

Transfer data using horizontal compression (compression within records)

Vertical:

Transfer data using vertical compression (compression across records)

DEFLATE:

Transfer data using DEFLATE compression

When a log file for a lower version is converted, "---" is displayed.

Compression Ratio

The compression ratio when compression is executed is displayed. The unit is percentage.

Code Converted By

The host on which the code conversion is executed is displayed.

Sending Side:

Execute the code conversion on the sending-side host

Receiving Side:

Execute the code conversion on the receiving-side host

No Conversion:

Execute a transfer without code conversion or a binary transfer

When a log file for a lower version is converted, "---" is displayed.

Transfer Block Length

The length of one transfer block of the Send file is displayed. The unit is byte.

Transfer Block Count

The number of blocks of the Send file per transfer is displayed.

Identifier

The identifier marked per transaction is displayed.

Transfer ID

The unique identifier that is issued for the file transfer is displayed.

Encryption Used

This field displays the type of the Encryption Scheme that is used for the transfer.

-:

Transfer does not use ciphers

HULFT:

HULFT Encryption Scheme

C4S:

HULFT Cipher Option (C4S)

AES:

HULFT Cipher Option (AES)

OTHER:

Encryption Scheme other than the above

Interface DBID

The interfaced database ID is displayed.

Comment

The comment that is registered in the Send Management Information for the transfer is displayed.

= Remarks =

If there is differential between Send Acknowledge Date and Send Date, following causes are suspected:

  • Send File is issued more than specified in Send Process Multiplex Level or Send Process Multiplex Level by Host, which leads HULFT to send-waiting status.

  • Auto Resend is executed several times.

You can view Send Acknowledge Date of the transfer which remains to be unsent or in the middle of transferring on the Transfer Status List screen.

 

Sending Side Job Status

For details, refer to Sending Side Job Status and Receiving Side Job Status.