Security

Management Screen Security (admcheck)

Specify whether or not to use the Management Screen Security function. Note that the Management Screen Security function becomes invalid unless Password Check is set as 'Yes' (enable password check).

Disabled:

Disable the Management Screen Security function

Enabled:

Enable the Management Screen Security function

Refer to Management Console Security for details on the Management Screen Security function.

Password Check (password)

Specify whether or not to carry out user and password checks when being connected to from the HULFT Management Console or HULFT Manager.

Yes:

Enable password check

No:

Disable password check

Note

When you change the setting from 'No' to 'Yes' and save it, users are prompted to enter the user ID and password the next time they attempt to connect to HULFT on the destination host from HULFT Manager, even if the HULFT is not restarted after the change.

Note that you need to register necessary users on HULFT installed on the destination host before you change the setting to 'Yes' and save it. Otherwise, the users cannot connect to HULFT on the destination host.

Allow Send/Resend Request from Unregistered Host (allowsndreq)

Specify whether to accept service requests for Send Request (SEND) and Resend Request (RESEND) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the services

No:

Refuse to accept the services

Allow Post-receive Job Result Inquiry from Unregistered Host (allowpostrjobrslt)

Specify whether to accept service requests for Post-Receive Job Result Inquiry (HULJOB) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service

No:

Refuse to accept the service

Allow Job Result Notification Request from Unregistered Host (allowjobrsltntfy)

Specify whether to accept service requests for Job Execution Result Notification (HULSNDRC) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service

No:

Refuse to accept the service

Allow Remote Job Execution Request from Unregistered Host (allowrmtjobexe)

Specify whether to accept service requests for Remote Job Execution (HULRJOB) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service

No:

Refuse to accept the service

Allow Instant Transfer from Unregistered Host (allowinsttrans)

Specify whether to accept requests for instant transfer from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the requests for instant transfer

No:

Refuse the requests for instant transfer

Instant Transfer Receive Root Directory (insttransroot)

Specify the root folder under which receive files are stored in instant transfer.

When the save destination for the receive file is specified on the sending-side host, this folder or a subfolder of this folder must be specified. If an other folder is specified, a transfer error occurs.

If a save destination for the receive file is omitted on the sending-side host, the receive file is stored in the folder specified in this field.

Forced Strong Key Mode (strongkeymode)

Specifies whether Forced Strong Key Mode is on or off.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

0:

Disabled

1:

Enabled

For details on Forced Strong Key mode, refer to Administration Manual.

This field can be viewed but not modified on the HULFT Manager Management Console. To modify the settings, edit the System Environment Settings file.

Transfer-Related File Deletion Mode (trnsfr_file_del)

Specify whether transferred files can be recovered after deletion.

0:

Normal mode

Delete transferred files using the same method as before

1:

Unrecoverable mode

Delete transferred files after making them unrecoverable

 

You can specify this setting for the following files:

For details on deleting the files by using "Unrecoverable mode," refer to "Settings of management information" in Operation Manual.

 

• Send file

• Receive file

• Receive file (backup)

• Generational management file

• Multiple Receive file

• Receive work file

• File of extracted Multiple Receive file data

• File after file records are edited

• Joined file

• Split file

• CSV format file