Workflow of installation

The procedure for the installation of HULFT varies depending on the installation route and the Installation Type.

This section shows the procedure for each Installation Type for different installation routes, and also whether each step of the procedure is required or not.

When the installation route is Express Installation

The table below shows the procedure for Express Installation.

You can carry out the following installation procedure according to the on-screen instructions in the setup program.

Table 1.2 Installation Procedure for Each Installation Type (in Express Installation)
Installation Step		New Installation	Update Installation	Default Value to be Set
Startup of the installation		✓	✓
Entry of the Serial Number and the Product Key (*1)		✓	✓
Entry of the Term License Key (*2)		†	✓
Selection of the Installation Route		✓	✓
	Confirmation message asking you whether you want to update HULFT by Express Installation	-	✓
Selection of the Installation Type		-	-
Entry of the installation directory		-	-	Execution module storage directory /usr/local/HULFT/bin Settings file storage directory /usr/local/HULFT/etc
Warning message indicating that HULFT is already installed in the new installation destination		-	-
Confirmation of the installation environment		-	-	Non Clustering Environment
Entry of the Temporary File Storage Path		-	-	/usr/local/HULFT/tmp
Specification of the Pid File Generation Path		-	-
Entry of the Local Host Name		-	-	Local host name
Selection of the HULFT Operation Language		-	-	The value varies depending on the system locale. (*3)
Selection of the Code Set for Transfer		-	-	The value varies depending on the system locale. (3)(4)
Selection of the date format		-	-	The value varies depending on the system locale. (3)(4)
Selection of the output method of the trace log		-	† (*5)	Output only to the trace output file
Confirmation of the installation conditions		✓	✓
Ending of the installation		✓	✓

✓	:	Required
†	:	Required in certain cases
-	:	Not required

*1	:	For a Trial version, you can use only New Installation.
*2	:	This step is required only for the Product version (Fixed Term License) of HULFT.
*3	:	For details, refer to the descriptions about operation in the following sections: Selecting the HULFT Operation Language Selecting the Code Set for Transfer Selecting the date format
*4	:	For Update Installation, the value before an update will be inherited and set.
*5	:	This step is required when all of the following conditions are met: An Update Installation is performed for HULFT version lower than 8.4.0 The setting value of Trace Output Mode (tlogmode) is not "0" in the System Environment Settings.

When the installation route is 'Custom Installation'

The table below shows the procedure for Custom installation.

You can carry out the following installation procedure according to the on-screen instructions in the setup program.

Table 1.3 Installation Procedure for Each Installation Type (in Custom Installation)
Installation Step		New Installation				Update Installation				Product Key Update
		Non Clustering Environment		Clustering Environment (Active) (*2)	Clustering Environment (Standby) (*2)	Non Clustering Environment		Clustering Environment (Active) (*2)	Clustering Environment (Standby) (*2)
		(*1)	(*2)	Clustering Environment (Active) (*2)	Clustering Environment (Standby) (*2)	(*1)	(*2)	Clustering Environment (Active) (*2)	Clustering Environment (Standby) (*2)
Startup of the installation		✓	✓	✓	✓	✓	✓	✓	✓	✓
Entry of the Serial Number and the Product Key		✓	✓	✓	✓	✓	✓	✓	✓	✓
Entry of the Term License Key (*3)		†	†	†	†	†	†	†	†	†
Selection of the Installation Route		✓	✓	✓	✓	✓	✓	✓	✓	✓
	Confirmation message asking you whether you want to update HULFT by Express Installation	-	-	-	-	-	-	-	-	-
Selection of the Installation Type (*4)		✓	✓	✓	✓	✓	✓	✓	✓	✓
Entry of the installation directory		✓	✓	✓	✓	✓	✓	✓	✓	✓
Warning message indicating that HULFT is already installed in the new installation destination		†	†	†	†	-	-	-	-	-
Confirmation of the installation environment		-	✓	✓	✓	-	✓	✓	✓	-
Entry of the Temporary File Storage Path		✓	✓	✓	-	-	-	-	-	-
Specification of the Pid File Generation Path		-	-	✓	-	-	-	-	-	-
Entry of the Local Host Name		✓	✓	✓	-	-	-	-	-	-
Selection of the HULFT Operation Language		✓	✓	✓	-	-	-	-	-	-
Selection of the Code Set for Transfer		✓	✓	✓	-	✓	✓	✓	-	-
Selection of the date format		✓	✓	✓	-	-	-	-	-	-
Selection of the output method of the trace log		-	-	-	-	† (*5)	† (*5)	† (*5)	† (*5)	-
Confirmation of the installation conditions		✓	✓	✓	✓	✓	✓	✓	✓	✓
Ending of the installation		✓	✓	✓	✓	✓	✓	✓	✓	✓

✓	:	Required
†	:	Required in certain cases
-	:	Not required

*1	:	HULFT10 Standard grade
*2	:	HULFT10 Enterprise grade
*3	:	This step is required only for the Product version (Fixed Term License) of HULFT.
*4	:	For a Trial version, you can use only New Installation.
*5	:	This step is required when all of the following conditions are met: An Update Installation is performed for HULFT version lower than 8.4.0 A value other than "0" is set for Trace Output Mode (tlogmode) in the System Environment Settings