System Environment Settings (HULFT-HUB Server)

This topic explains how to register information on HULFT-HUB Server in order to relay file transfers and carry out multicasting.

You can view and modify this information on the Management screen.

Of the fields that you can set on the server's System Environment Settings screen, refer to Routing Information, Neighboring Server Information, and Network Connection Filter Information for details about the route settings, Neighboring Server, and network connection filter information.

List of Fields

1. Environment Settings

<Table> System Environment Settings (Environment Settings)

No.	Field Name	Default Value	Setting Value	Specification	Remarks
A1	Host Name (MyHostName)	Setting value for operating system ('unknown' when a value is not set for the operating system)	Alphanumeric characters and specific symbols *4	*1
A2	Service Name (ServiceName)		Alphanumeric characters	*1
A3	Alias (DispName)	Setting value for the Host Name	Alphanumeric characters	Optional	Within 256 bytes
A4	Port No. (HubPortNo)	40000	From 1 to 65535	*1
A5	Notify User Details	No	*3	Optional
A6	Kanji Code Type (KnjCode)	SHIFT-JIS	*3	Mandatory
A7	JIS Year (JISType)	83JIS	*3	Mandatory
A8	System Status Storage Directory (MMapDir)	*2	Alphanumeric characters	Mandatory	Within 128 bytes
A9	Management Information Storage Directory (CurrentDBDir)	*2	Alphanumeric characters	Mandatory	Within 128 bytes
A10	Accumulated Data Storage Directory (AccumulateRootDir)	*2	Alphanumeric characters	*1	Within 128 bytes
A11	Accumulated Data Extraction Work Directory (AccumulateWorkDir)	*2	Alphanumeric characters	*1	Within 128 bytes
A12	Transfer Log File CSV Storage Directory (hub_TransferHistory.db)	*2	Alphanumeric characters	*1	Within 128 bytes
A13	Management Information Backup Storage Directory (BackupDBDir)	*2	Alphanumeric characters	*1	Within 128 bytes
A14	DataMagic Installation Directory (DataMagicBinDir)		Alphanumeric characters	Optional	Within 128 bytes
A15	DataMagic Environment Settings Directory (DataMagicEtcDir)		Alphanumeric characters	Optional	Within 128 bytes
A16	HUB Operation Language	*5	*3	Mandatory

*1:	Allow Only to Browse
*2:	Directory that was set during installation. For details, refer to HULFT-HUB Server Manual.
*3:	Select an option from the list that is shown on the screen.
*4:	The only symbols allowed are '-' (hyphen) and '.' (period).
*5:	Language that was specified during installation.

2. Operation Settings

<Table> System Environment Settings (Operation Settings)

No.	Field Name	Default Value	Setting Value	Specification	Remarks
B1	Transfer Processing Multiplex Level (TransRlyMax)	999	From 1 to 99999	Mandatory
B2	Request Acknowledge Processing Multiplex Level (ReqRlyMax)	999	From 1 to 99999	Mandatory
B3	Total Job Flow Multiplex Level (JFProcMax)	99	From 1 to 99	Mandatory
B4	Simultaneous Manager Connection Count (MgrConnMax)	10	From 0 to 9999	*1
B5	When Multicasting is Unsuccessful (MulticastError)	Continue	*2	Mandatory
B6	Criterion for Unsuccessful Multicasting (MulticastErrorCondition)	When Error Occurs at One of Multicasting Destinations	*2	Mandatory
B7	Transfer Log Storage Threshold (TrnlogThreshold)	100000	From 0 to 999999	Mandatory	Unit: record
B8	Number of Transfer Log Records Kept Undeleted (TrnlogHoldCount)	*3	*4	Mandatory	Unit: record
B9	Job Flow Log Storage Threshold (JFlogHold)	100000	From 0 to 999999	Mandatory	Unit: record
B10	Number of Job Flow Log Records Kept Undeleted (JFlogHoldCount)	50000	*5	Mandatory	Unit: record
B11	Number of Months to Save Transfer Log as CSV Files (TrnlogCSVHoldCount)	0	From 0 to 99	Mandatory	Unit: month
B12	Direct Transfer Log Batch Processing Interval (HubhistoryInterval)	0	0, from 5 to 1440	Mandatory	Unit: minute
B13	Management Information Backup Interval (BackupInterval)	0	From 0 to 99	Mandatory	Unit: day
B14	Management Information Backup Start Time (BackupTime)	0300	From 0000 to 2359	Mandatory
B15	Management Information Backup Target (BackupTarget)	0	*2	Mandatory
B16	Management Information Backup Generation File Count (BackupCount)	0	From 0 to 99	Mandatory
B17	Transfer Error Resolution Determination Condition (TrnErrorRecoveryCheckType)	No Transfer Error	*2	Mandatory
B18	Notification Host Name for Transfer via HUB (HostNameNotice)	Format with Port No.	-	*1
B19	Accumulation-Related File Deletion Mode	Normal mode	*2	Mandatory
B20	Compression Type Selection	Common	*2	Mandatory

*1:	Allow Only to Browse
*2:	Select an option from the list that is shown on the screen.
*3:	If the Transfer Log Storage Threshold is '300' or less: 0
	Otherwise: Transfer Log Storage Threshold - 300 records
*4:	Specify a value lower than the Transfer Log Storage Threshold.
*5:	Specify a value lower than the Job Flow Log Storage Threshold.

3. Communication Settings

<Table> System Environment Settings (Communication Settings)

No.	Field Name	Default Value	Setting Value	Specification	Remarks
C1	Client Activity Monitoring Interval (HealthCheckInterval)	180	0, from 10 to 86400	Mandatory	Unit: second
C2	HUB Manager Communication Encryption Type (CipherTypeTelegramCom)	Use HULFT Encryption Scheme	*1	Mandatory
C3	Inter-HUB Server Encryption Type (CipherTypeNeighbor)	No Encryption	*1	Mandatory
C4	Socket Timeout (SocketTimer)	3600	0, from 10 to 259200	Mandatory	Unit: second
C5	Connect Retry Count (SocketRetryMax)	5	From 0 to 9999	Mandatory
C6	Connect Retry Interval (SocketRetryInterval)	20	From 0 to 9999	Mandatory	Unit: second
C7	Server Alive Interval	3600	0, from 180 to 86400	Mandatory	Unit: second

*1:	Select an option from the list that is shown on the screen.

4. Operation Status Output

<Table> System Environment Settings (Operation Status Output)

No.	Field Name	Default Value	Setting Value	Specification	Remarks
D1	Trace File Name (TraceFile)	$HULHUBETC/trace.log *1		Mandatory	Within 255 bytes
D2	Trace File Max. Size (TraceMaxSize)	10	From 0 to 1024	Mandatory	Unit: MB
D3	Operation Log Output Mode (OplSelectMode)	Do Not Output Log	*2	Mandatory
D4	Operation Log Auto Switch Size (OplChangeSize)	0	From 0 to 9999	Mandatory
D5	Operation Log Generation File Count (OplCycleCount)	9999	From 2 to 9999	Mandatory
D6	Trace Acquisition Mode (TraceMode)	Information	*2	Mandatory

*1:	$HULHUBETC differs depending on the settings during installation. For details, refer to HULFT-HUB Server Manual.
*2:	Select an option from the list that is shown on the screen.

[Legend]
Default Value	Default value that is set when you install the server
Specification	Whether the specification is mandatory or optional when you update the management information record on a screen

Explanation of Each Field

1. Environment Settings

The following describes each field in the Environment Settings.

(A1) Host Name (MyHostName)

This field specifies the host name of HULFT-HUB Server.

[Remarks]

You cannot modify this field in HULFT-HUB Manager. For details, refer to HULFT-HUB Server Manual.

(A2) Service Name (ServiceName)

This field specifies the service name of HULFT-HUB Server.

[Remarks]

You cannot modify this field in HULFT-HUB Manager. For details, refer to HULFT-HUB Server Manual.

(A3) Alias (DispName)

This field specifies the alias of HULFT-HUB Server that is displayed on the screen of HULFT-HUB Manager.

(A4) Port No. (HubPortNo)

This field specifies the port number that HULFT-HUB Server uses to communicate with other systems.

This field shows as the default value the port number for HULFT-HUB Server that is registered on the Register Server dialog box.

Ensure that this port number is not the same as a port number that is reserved by the operating system, or a port number that is used by another application.

[Remarks]

You cannot modify this field in HULFT-HUB Manager. For details, refer to HULFT-HUB Server Manual.

(A5) Notify User Details (UserIdNotify)

If you specify "Yes", HULFT-HUB Manager account information can be notified to HULFT-HUB Server.

For the operation log of HULFT-HUB Server, the login account for HULFT-HUB Server is stored on User ID (Management screen), and the user ID on the operating system on which HULFT-HUB Manager is operating is stored on User ID (OS).

The default value is "No".

(A6) Kanji Code Type (KnjCode)

This field specifies the Kanji code type of the system on which the server is operating.

<Table> Setting Values for Kanji Code Type (KnjCode)
On-screen Options	Description
SHIFT-JIS	SHIFT-JIS
EUC	EUC
UTF-8	UTF-8

(A7) JIS Year (JISType)

This field specifies the JIS year of the Kanji code type of the system on which HULFT is operating.

<Table> Setting Values for JIS Year
On-screen Options	Description
78JIS	JIS 1978
83JIS	JIS 1983

(A8) System Status Storage Directory (MMapDir)

This field specifies the storage directory for temporary files storing information such as the transfer status and operation status of HULFT-HUB Server.

(A9) Management Information Storage Directory (CurrentDBDir)

This field specifies the directory in which HULFT-HUB Server stores the memory information that is used for request processing.

(A10) Accumulated Data Storage Directory (AccumulateRootDir)

This field specifies the root directory in which HULFT-HUB Server stores the accumulated data.

Specify the absolute path for the storage root directory in which HULFT-HUB Server accumulates transfer data. If the specified directory does not exist, HULFT-HUB Server does not startup.

This is enabled only when the server is HULFT-HUB Server-ENT.

[Remarks]

You cannot modify this field in HULFT-HUB Manager.

(A11) Accumulated Data Extraction Work Directory (AccumulateWorkDir)

This field specifies the absolute path for the directory that is used to extract accumulated data in the Job Flow function. If the specified directory does not exist, HULFT-HUB Server does not startup.

This is enabled only when the server is HULFT-HUB Server-ENT.

[Remarks]

You cannot modify this field in HULFT-HUB Manager.

(A12) Transfer Log File CSV Save Directory (TrnlogCSVHoldDir)

This field specifies the absolute path for the directory that stores the records of Transfer Log in CSV format. If the specified directory does not exist, HULFT-HUB Server does not startup.

[Remarks]

You cannot modify this field in HULFT-HUB Manager.

(A13) Management Information Backup Storage Directory (BackupDBDir)

This field specifies the absolute path for the Management Information Backup Storage Directory. If the specified directory does not exist, HULFT-HUB Server does not startup.

[Remarks]

You cannot modify this field in HULFT-HUB Manager.

(A14) DataMagic Installation Directory (DataMagicBinDir)

This field specifies the absolute path for the directory that is used to start HULFT-DataMagic in the Job Flow function. Specify this field when you call HULFT-DataMagic in a Job Flow.

This is enabled only when the server is HULFT-HUB Server-ENT.

(A15) DataMagic Environment Settings Directory (DataMagicEtcDir)

This field specifies the absolute path for the directory that is used to start HULFT-DataMagic in the Job Flow function. Specify this field when you call HULFT-DataMagic in a Job Flow.

This is enabled only when the server is HULFT-HUB Server-ENT.

(A16) HUB Operation Language

This field specifies the language that HULFT-HUB Server uses for outputting a message.

<Table> Setting Values for HUB Operation Language
On-screen Options	Description
Japanese	Output messages in Japanese
English	Output messages in English

The content that is affected by this field is shown below.

Trace logs
Utility output

2. Operation Settings

The following describes each field in the Operation Settings.

(B1) Transfer Processing Multiplex Level (TransRlyMax)

This field specifies the maximum number of transfer processing (total number of file transfer relay processing and multicasting) that HULFT-HUB Server can carry out simultaneously.

(B2) Request Acknowledge Processing Multiplex Level (ReqRlyMax)

This field specifies the maximum number of the Request Acknowledge service that HULFT-HUB Server can relay simultaneously.

(B3) Total Job Flow Multiplex Level (JFProcMax)

This field specifies the maximum number of Job Flows that the server can execute at the same time.

This is enabled only when the server is HULFT-HUB Server-ENT.

(B4) Simultaneous Manager Connection Count (MgrConnMax)

This field specifies the number of HULFT-HUB Manager users who can connect to HULFT-HUB Server at the same time.

[Remarks]

You cannot modify this field in HULFT-HUB Manager. For details, refer to HULFT-HUB Server Manual.

(B5) When Multicasting is Unsuccessful (MulticastError)

This field specifies how HULFT-HUB Server handles the Send processing for the other transfer destination hosts if an error occurs when transferring data to one or more of the transfer destination hosts during multicasting.

<Table> Setting Values for When Multicasting is Unsuccessful
On-screen Options	Description
Cancel	Immediately cancel multicasting.
Continue	Cancel only transfers to hosts on which transfer errors are detected, and continue the processing for other hosts.

(B6) Criterion for Unsuccessful Multicasting (MulticastErrorCondition)

This field specifies the criterion when HULFT-HUB Server sends notification of a transfer error to the host on the sending side if an error occurs when transferring data to one or more hosts during multicasting.

<Table> Setting Values for Criterion for Unsuccessful Multicasting
On-screen Options	Description
When Error Occurs at One of Multicasting Destinations	Send notification of a transfer error when file transfer fails with one or more transfer destination hosts.
When Error Occurs in All Transfers	Send notification of a transfer error when file transfer fails to all transfer destination hosts.

The default value is 'When Error Occurs at One of Multicasting Destinations.'

This field is enabled when you select 'Continue' for the When Multicasting is Unsuccessful.

(B7) Transfer Log Storage Threshold (TrnlogThreshold)

If the number of transfer log records exceeds the specified value, the transfer log records are retained up to the number that is specified for the Number of Transfer Log Records Kept Undeleted, and the rest are automatically deleted.

If you specify '0,' no records are automatically deleted (unlimited accumulation).

(B8) Number of Transfer Log Records Kept Undeleted (TrnlogHoldCount)

If the number of transfer log records exceeds the value that is specified for the Transfer Log Storage Threshold, the transfer log records are retained up to the number that is specified for this field and the rest are automatically deleted. If you specify '0' for the Transfer Log Storage Threshold, this setting is disabled even if you specify a value for this field.

The default value is set as the value that is specified for the Transfer Log Storage Threshold minus 300 (records). If the value that is specified for the Transfer Log Storage Threshold is 300 or lower, the value is set as '0.'

(B9) Job Flow Log Storage Threshold (JFlogHold)

If the number of log records that are output as Job Flow results exceeds the specified value, the log records are retained up to the number that is specified for the Number of Job Flow Log Records Kept Undeleted, and the rest are automatically deleted.

This is enabled only when the server is HULFT-HUB Server-ENT.

-	0	:	Do not delete records automatically (unlimited accumulation).
-	From 1 to 999999	:	Delete records automatically based on the specified values.

(B10) Number of Job Flow Log Records Kept Undeleted (JFlogHoldCount)

If the number of log records that are output as Job Flow results exceeds the specified value for the Job Flow Log Storage Threshold, the Job Flow log records are retained up to the specified number, and the rest are automatically deleted, starting with the oldest. If you specify '0' for the Job Flow Log Storage Threshold, the value that is specified for this field is irrelevant.

This is enabled only when the server is HULFT-HUB Server-ENT.

[Note]

If HULFT-HUB detects that the number of Job Flow log records exceeds the value that is specified for the Job Flow Log Storage Threshold, the log records are deleted up to the number that is specified for the Number of Job Flow Log Records Kept Undeleted, and then new log records are added.

(B11) Number of Months to Save Transfer Log as CSV Files (TrnlogCSVHoldCount)

This field specifies the number of months for which the server saves the Transfer Log as CSV files.

-	0	:	Do not save records.
-	From 1 to 99	:	Save records according to the specified values.

(B12) Direct Transfer Log Batch Processing Interval (HubhistoryInterval)

This field specifies the time interval for starting batch processing for centralized management of the Direct Transfer log.

-	0	:	Do not start batch processing regularly.
-	From 5 to 1440	:	Start batch processing for centralized management of the Direct Transfer log at the specified interval.

This field is shown as 'Batch Processing Interval' on the server's System Environment Settings screen.

(B13) Management Information Backup Interval (BackupInterval)

This field specifies the time interval for regularly creating backup of the management information.

-	0	:	Do not create backups regularly.
-	From 1 to 99	:	Create backups at the specified interval.

This field is shown as 'Backup Interval' on the server's System Environment Settings screen.

(B14) Management Information Backup Start Time (BackupTime)

This field specifies the time when the regular backup of the management information is created.

This field is shown as 'Backup Execution Time' on the server's System Environment Settings screen.

(B15) Management Information Backup Target (BackupTarget)

This field specifies the management information that is backed up and the backup conditions.

<Table> Setting Values for Management Information Backup Target
On-screen Options	Description
Back up All Only When Updated	Create backups only for the system management information that has been updated among all system management information (*).
Always Back up All	Create backups for all system management information (*) regardless of whether it has been updated.
Back up Partially Only When Updated	Create backups only for specific system management information (*) that has been updated.
Always Back up Partially	Create backups only for specific system management information (*) regardless of whether it has been updated.

The details of the ranges of 'all system management information' and 'specific system management information' are shown below.

<Table> All Management Information and Specific Management Information

Type of System Management Information		All System Management Information	Specific System Management Information	SVR (*1)	MGR (*2)
Server's System Management Information	Alternative Management Information	✓
	User Information	✓		✓
	Business Permission Information	✓		✓
	Business Group Information	✓		✓
	Client Business Group Information	✓
	Registered Client Information	✓
	Transfer Information	✓	✓	✓	✓
	Transfer Conditions	✓	✓	✓	✓
	Transfer Destination Host Information	✓	✓	✓	✓
	Host Group Information	✓
	Neighboring Server Information	✓
	Routing Information	✓
	Client Status Management	✓
	Accumulation Environment Settings	✓		✓
	Job Flow Management Information	✓
Client System Management Information	Client System Environment Settings	✓
	Client Installation Information	✓
	Send Management Information	✓	✓	✓	✓
	Receive Management Information	✓	✓	✓	✓
	Transfer Group Information	✓	✓	✓	✓
	Host Information	✓	✓	✓	✓
	Job Information	✓	✓	✓	✓
	Format Information	✓	✓	✓	✓
	Multi Format Information	✓	✓	✓	✓
	Schedule Information	✓	✓	✓	✓
	Mail Interface Information	✓	✓	✓	✓
	XML Conversion Information	✓	✓
	File Trigger Information	✓	✓	✓	✓

*1:	Indicates whether the Management Information Parameter Generation utility (utlhubigen) for HULFT-HUB Server can create a parameter file from the backup file.
*2:	Indicates whether the Collecting and Distributing System Management Information screen can be used to obtain the management information from the backup file.

(B16) Management Information Backup Generation File Count (BackupCount)

This field specifies the maximum number of generations of the management information backup files that the server stores. If the number of generations of management information that is backed up exceeds the specified value, the oldest backup is deleted.

-	0	:	Do not delete records automatically (unlimited accumulation).
-	From 1 to 99	:	Retain backups for the specified number of generations.

This field is shown as 'Backup Generation File Count' on the server's System Environment Settings screen.

(B17) Transfer Error Resolution Determination Condition (TrnErrorRecoveryCheckType)

This field allows you to select the mode for transfer error correction, where icons of servers on the Structure Diagram are automatically changed to normal icons.

<Table> Setting Values for Transfer Error Resolution Determination Condition
On-screen Options	Description
No Transfer Error	The transfer error status is cleared when a transfer that was once logged as an error in the Transfer Log is carried out successfully.
No Delivery Error	The transfer error status is cleared when there are no log records with delivery errors in the accumulation list.

Once the Structure Diagram is refreshed to the latest status (either automatically or manually) after a transfer error is resolved, the server icon returns to its normal appearance.

(B18) Notification Host Name for Transfer via HUB (HostNameNotice)

This field specifies the format for the host name of the remote host that is registered on the client when you create a Transfer Information record, and the format for the host name that is sent from the transfer destination host when you carry out transfer via HUB.

[Remarks]

You cannot modify this field in HULFT-HUB Manager. For details, refer to HULFT-HUB Server Manual.

<Table> Setting Values for Notification Host Name for Transfer via HUB
On-screen Options	Description
Format with Port No.	The format 'Host Name_Receive Port No.' is used for all clients.
Format with Port No. for Controlled Clients Only	The format 'Host Name_Port No.' is used for Controlled Clients, and the format 'Host Name' is used for Clients outside of Control.
Format without Port No.	The format 'Host Name' is used for all clients.

(B19) Accumulation-Related File Deletion Mode

This field allows you to select whether to process accumulated files so that once deleted, they cannot be recovered later.

<Table> Setting Values for Accumulation-Related File Deletion Mode
On-screen Options	Description
Normal Mode	Delete files using the conventional method.
Unrecoverable Mode	Delete files after making them unrecoverable.

If you are using the alternative server function, specify this field on the alternative server also.

(B20) Compression Type Selection

This field allows you to select which compression type is used when the host on the receiving side does not support the compression type specified on the host on the sending side.

The Compression Type Selection setting in HULFT-HUB is enabled only when 'Common' is specified for Compression Type Selection on the HULFT side.

<Table> Setting Values for Compression Type Selection
On-screen Options	Description
Common	Use a compression type with the highest compression efficiency that is available on both the hosts on the sending side and receiving side. The supported types in order of compression efficiency are as follows: Zstandard > DEFLATE > None
None	No compression is used if the host on the receiving side does not support the compression type specified on the host on the sending side.

3. Communication Settings

The following describes each field in the Communication Settings.

(C1) Client Activity Monitoring Interval (HealthCheckInterval)

This field specifies the interval for monitoring the activity status through regular polling of the Registered Client by HULFT-HUB Server.

If you specify '0,' the server does not execute regular polling to monitor the activity status.

[Remarks]
-	The targets of this monitoring function are HULFT Ver.6 or higher clients.
-	The color of the client's icon appears on the Structure Diagram according to the activity status, as shown below.
	Color: The client is in active.
	Black: The client is stopped.

(C2) HUB Manager Communication Encryption Type (CipherTypeTelegramCom)

This field allows you to select whether or not to encrypt the control information that is sent from HULFT-HUB Server.

You can specify this field when the server is lower than HULFT-HUB Server Ver.3.9.0.

The control information is always encrypted when the server is HULFT-HUB Server Ver.3.9.0 or higher.

<Table> Setting Values for HUB Manager Communication Encryption Type
On-screen Options	Description
No Encryption	Do not use encryption.
Use HULFT Encryption Scheme	Use HULFT Encryption Scheme for encryption.

(C3) Inter-HUB Server Encryption Type (CipherTypeNeighbor)

This field specifies whether or not to encrypt framed messages that are sent to Neighboring Servers.

This is enabled only when the server is HULFT-HUB Server-ENT.

<Table> Setting Values for Inter-HUB Server Encryption Type
On-screen Options	Description
No Encryption	Do not use encryption.
HULFT Encryption Scheme	Use HULFT Encryption Scheme for encryption.
C4S Priority	Use C4S for encryption.
AES Priority	Use AES for encryption.

(C4) Socket Timeout (SocketTimer)

This field specifies the time-out value that the server uses to monitor for the occurrence of a state of no communication after a connection is established.

If you specify '0,' the server waits for receiving a response without any time limit.

(C5) Connect Retry Count (SocketRetryMax)

This field specifies the number of times to try reconnecting if socket connection fails.

If you specify '0,' the server does not try to reconnect.

(C6) Connect Retry Interval (SocketRetryInterval)

This field specifies the interval to wait to try reconnecting if socket connection fails.

If you specify '0,' the server waits for receiving a response without any time limit.

(C7) Server Alive Interval

This field specifies the interval for monitoring the activity of the Neighboring Server.

If you specify '0,' the server does not monitor the activity.

You can specify this field for HULFT-HUB Server Ver.3.9.0 or later.

4. Operation Status Output

The following describes each field in the Operation Status Output settings.

(D1) Trace File Name (TraceFile)

This field specifies the file name for the storage destination when the server acquires trace information.

Specify the full path.

This field is enabled if anything other than 'Do Not Acquire' is specified for a daemon or program in the Trace Acquisition Mode setting.

(D2) Trace File Max. Size (TraceMaxSize)

This field specifies the maximum size of the trace file.

If the trace accumulation amount exceeds this setting value, a backup is acquired and a new trace file is created.

The backup file has the same name as the Trace File Name with '.bk' added to the end. It is created in the same directory, and only one generation is saved.

If you specify '0,' the server accumulates Trace Log records without any limit in the number of records.

(D3) Operation Log Output Mode (OplSelectMode)

This field specifies the output mode of the operation log.

[Remarks]

You can configure settings related to operation logs on servers that are Ver.2.2.0 or higher.

(D4) Operation Log Auto Switch Size (OplChangeSize)

This field specifies the threshold size for automatically switching operation log files.

[Remarks]

You can configure settings related to operation logs on servers that are Ver.2.2.0 or higher.

(D5) Operation Log Generation File Count (OplCycleCount)

This field specifies the generation file count of the operation log.

[Remarks]

You can configure settings related to operation logs on servers that are Ver.2.2.0 or higher.

(D6) Trace Acquisition Mode (TraceMode)

This field allows you to select the level for the message output to the trace file separately for each daemon and program.

<Table> Setting Values for Trace Acquisition Mode
On-screen Options	Description
Do Not Acquire	Do not record the trace information.
Fatal Error	If a fatal error occurs, record the trace information.
Error	If a fatal error or a moderate error occurs, record the trace information.
Warning	If a fatal error, a moderate error, or a warning level event occurs, record the trace information.
Information	If a fatal error, a moderate error, a warning level event, or a confirmation level event occurs, record the trace information.

The daemons and programs that you can specify are as follows:

	- HUB Daemon (hubmaind)
	- PROXY Daemon (hubpxyd)
	- Relay Daemon (hubrlyd)
	- Multicasting Daemon (hubmctd)
	- Delivery Daemon (hubsndd)
	- Manager Daemon (hubmgrd)
	- Monitor Activities Program
	- Utility Program
	- Job Flow Daemon (jfexecd)
	- Job Flow Execution Program
	- Job Flow Utility Program

For details about each daemon and program, refer to HULFT-HUB Server Manual.