Settings of Management Information (In the Case of Send Request)

When you issue Send Request from Data Transfer Site to HULFT, you must set the management information of HULFT.

Basically, the following settings are required.

For details on the settings of HULFT management information, refer to Operation Manual of HULFT.

(1) Host Information

You must specify the following fields.

Table 6.1 Field List of Host Information

Field

Setting Value

Host Name

Connection ID of the browser side_Agent ID of the browser side_Host name of the browser side.

Note

In HULFT8 for IBMi, you cannot use lowercase characters in the management information settings.

If you intend to connect to HULFT8 for IBMi, do not use lowercase characters for the following settings:

  • Connection ID on the Browser Transfer side

  • Agent ID on the Browser Transfer side

= Remarks =

Use an underscore (_) to separate each field.

Connection ID and Agent ID of the browser side are the value specified in the Browser Transfer Settings on the request acknowledge side.

Use the fixed value 'HWC-BROWSER' for the host name of the browser side.

Confirm the contents in the Browser Send Request tab on the Browser Transfer Settings screen in Management Console in advance.

Example: When the settings on the browser side is 'Connection ID=webconnect', 'Agent ID=demo' and 'Host Name=HWC-BROWSER'

Set Value: webconnect_demo_HWC-BROWSER

Receive Port No.

There is no need to change the value, because this field is not used by Browser Transfer.

Request Acknowledge Port No.

There is no need to change the value, because this field is not used by Browser Transfer.

HULFT7 Communication Mode

'No'

Proxy Server Name

The host name of the remote machine on which Agent is running (The host name resolution is required.)

Proxy Port No.

The receiving port number of Agent on the remote machine

(2) Transfer Group Information

Register the transfer group information that includes the host registered in 'Host Information'.

(3) Send Management Information

Register the Send Management Information that includes the Transfer Group ID registered in 'Transfer Group Information'.

Note

When you set the Send Management Information, if the transfer speed of HULFT has become slow by the settings of 'Transfer Interval', 'Transfer Block Length', and 'Transfer Block Count' in the Extension Settings, receiving a file by Data Transfer Site may fail.