Settings of the Management Information

The management information of HULFT must be set to use HULFT-WebConnect.

Basically, the settings shown below are required.

For details on the settings of HULFT management information, refer to Operation Manual of HULFT.

Local HULFT Operation

Field

Client Type of Partner Machine

Agent

CLI

Browser Transfer

D-Client

When issuing Send File

Host Information

Host Name

Connection ID of Agent on the receiving side_Agent ID of Agent on the receiving side_Host name of HULFT on the receiving side(*1)(*2)

Send File is not supported for CLI.

Send File is not supported for Browser Transfer.

Connection ID of D-Client settings_D-Client ID_D-Client ID(*1)(*2)

Receive Port No.

The receiving port number of HULFT on the receiving side

It is not necessary to change the value from the default. (This setting value is not used.)

HULFT7 Comm. Mode

No (N)(*3)

No (N)(*4)

Proxy Server Name

The host name of a machine on which Agent on the sending side is running (The host name resolution is required.)

The host name of a machine on which Agent on the sending side is running (The host name resolution is required.)

Proxy Port No.

The receiving port number of Agent on the sending side(*4)

The receiving port number of Agent on the sending side(*5)

Transfer Group Information

Register the transfer group information that includes the host registered in 'Host Information'.

Register the transfer group information that includes the host registered in 'Host Information'.

Send Management Information

Register the send management information that includes the Transfer Group ID registered in 'Transfer Group Information'.

Register the send management information that includes the Transfer Group ID registered in 'Transfer Group Information'.

When receiving Send File

Host Information

Host Name

Register the host name of HULFT on the sending side.

Enter the value specified for 'cli.hostname' in the CLI configuration file on the partner machine.(*2)

Specify 'HWC-BROWSER'.

Enter the setting value of the D-Client ID.(*2)

Receive Management Information

Register the receive management information.

Register the receive management information.

For the following three fields, set as follows:

Receive Mode: 'Single Receive' Generational Management: 'No' Verify Data: 'No'

Register the receive management information.

For the following three fields, set as follows:

Receive Mode: 'Single Receive' Generational Management: 'No' Verify Data: 'No'

Register the receive management information.

When issuing Send Request(*6)

Host Information (1)

 

Host Name

Connection ID of Agent on the request acknowledge side_Agent ID of Agent on the request acknowledge side_Host name of HULFT on the request acknowledge side(*1)(*2)

Send Request is not supported for CLI.

Send Request is not supported for Browser Transfer.

Send Request is not supported for D-Client.

Request Acknowledge Port No.

The request acknowledge port number of HULFT on the request acknowledge side

HULFT7 Comm. Mode

No (N)(*3)

Proxy Server Name

The host name of a machine on which Agent on the request issue side is running (The host name resolution is required.)

Proxy Port No.

The receiving port number of Agent on the request issue side(*5)

Host Information (2)

Host Name

Register the host name of HULFT on the sending side.

Receive Management Information

Register the receive management information.

When receiving Send Request

Host Information

Host Name

Connection ID of Agent on the receiving side_Agent ID of Agent on the receiving side_Host name of HULFT on the receiving side(*1)(*2)

Setting values specified for the following fields in the CLI configuration file (transfer-cli.conf): 'connection.id'_'cli.agent.id'_'cli.hostname'(*1)(*2)

Connection ID on the Browser Transfer side_Agent ID on the Browser Transfer side_Host name on the Browser Transfer side(*1)(*2)

Connection ID of D-Client settings_D-Client ID_D-Client ID(*1)(*2)

Receive Port No.

The receiving port number of HULFT on the receiving side

It is not necessary to change the value from the default. (This setting value is not used.)

HULFT7 Comm. Mode

No (N)(*3)

No (N)(*4)

Proxy Server Name

The host name of a machine on which Agent on the sending side is running (The host name resolution is required.)

Proxy Port No.

The receiving port number of Agent on the sending side(*5)

Transfer Group Information

Register the transfer group information that includes the host registered in 'Host Information'.

Send Management Information

Register the send management information that includes the Transfer Group ID registered in 'Transfer Group Information'.

*1

:

Use an underscore (_) to separate each field.

Connection ID and Agent ID are as follows:

  • When performing communication with Agent

    The values specified in the Agent configuration file (agent.conf) on the remote machine

  • When performing communication with CLI

    The values specified in the CLI configuration file (transfer-cli.conf) on the partner machine

  • When performing Browser Transfer

    The Connection ID and Agent ID set in 'Browser Definition' in the Browser Send File tab and Browser Send Request tab on the Browser Transfer Settings screen on Management Console. Host Name is the fixed value 'HWC-BROWSER'

  • When performing communication with D-Client

    The Connection ID and D-Client ID set on the D-Client Settings screen on Management Console

 

Example: When performing communication with Agent

  • Settings of the Agent on the receiving side

    Connection ID=webconnect

    Agent ID=demo

    Host Name of HULFT=receiver

  • Setting value

    webconnect_demo_receiver

*2

:

If you intend to connect to HULFT for IBMi, do not use lowercase characters for the following settings:

  • Connection ID of Agent and Agent ID (agent.id)

  • Connection ID of CLI (connection.id), ID of CLI (cli.agent.id), and host name of CLI (cli.hostname)

  • Connection ID on the Browser Transfer side and Agent ID

  • Connection ID of D-Client and D-Client ID

*3

:

Specify 'Yes (Y)' when you transfer the data from HULFT Ver.8.0 to HULFT Ver.7.

*4

:

HULFT7 Comm. Mode is not supported.

*5

:

The receiving port number is the value specified for 'agent.sender.port' in the Agent configuration file (agent.conf).

For details, refer to Agent Settings.

*6

:

Register both Host Information (1) and Host Information (2).