Official | HULFT IoT Release Note Fourth Edition: July 1, 2021
HIPJ-1273
HULFT IoT Agent might execute a send processing of log information to HULFT IoT Manager every second
- Phenomenon
-
By some reason such as a malfunction occurs on the network or the polling interval is too long, the transfer logs or trace logs are accumulated on the HULFT IoT Agent environment separately ( _agentsnd.log.sequential# files and _agenttrace.log.sequential# files are created in the HULFT IoT Agent environment).
In this case, when HULFT IoT Agent connects HULFT IoT Manager, HULFT IoT Agent might execute a send processing of the log information to HULFT IoT Manager every second but not at polling intervals.
- Affected versions
-
From Ver.1.4.0 to Ver.1.4.1
- Version when it was corrected
-
Ver.1.5.0
- Affected module
-
HULFT IoT Agent
- Condition to reproduce
-
This phenomenon occurs after HULFT IoT Agent connects HULFT IoT Manager during all of the following conditions are met:
-
Log information has been divided by some reason such as network malfunction or a long polling interval, and the _agentsnd.log.sequential# files and the _agenttrace.log.sequential# files exist in the HULFT IoT Agent environment.
-
HULFT IoT Agent is performing with the "communication time limit" setting to "off".
-
- Alternative workaround
-
None
- Status description
-
When the conditions described at the condition to reproduce are met, even after HULFT IoT Agent connected HULFT IoT Manager, HULFT IoT Agent sends the log information at polling intervals.
Official | HULFT IoT Release Note Fourth Edition: July 1, 2021