Transfer of script to IoT gateway

To transfer the script you created to the IoT gateway, perform the steps described below.

Select Build > Build script and deploy it on a remote device on the Designer menu.
The Remote device connection settings dialog box is displayed. Enter as shown below.

Host name

Host name or IP address of the IoT gateway to which you want to connect

Port No.

Number of the port to use for SSH connection

Authentication type

Select Password authentication

User name

User name to use for SSH connection

Password

User password to use for SSH connection

Authentication key

If you selected Key authentication for Authentication type, select the authentication key file.

Passphrase

If you selected Key authentication for Authentication type, specify the passphrase from when you created the authentication key.

Target

OS type and CPU architecture of the IoT gateway to which you want to connect

Log level

Select "INFO"

Working directory

IoT gateway directory that you want to specify as the script transfer destination

= Remarks =
If you have performed Testing in a remote environment, the settings configured with the procedures therein are maintained.

If the environment you used for the test and the environment to be used for operation are the same, you can re-use the settings.
Click Finish and the message "Transfer was successful." appears.

Click OK.
On the IoT gateway OS, confirm that the file "es-agent.tar.gz" exists in the directory you specified for Working directory in the previous procedure.
```
$ cd /opt/edge
$ ls
es-agent.tar.gz
```

Expand "es-agent.tar.gz."

$ tar -xzvf es-agent.tar.gz
es-agent
es-agent.yaml
script.bql
$ ls
es-agent es-agent.tar.gz es-agent.yaml script.bql

Official | HULFT IoT EdgeStreaming First Step Guide Fourth Edition: July 1, 2021

You are here: