Send Log List By Host screen and Receive Log List By Host screen
-
The following uses the Send Log List By Host screen as an example.
The structure of the screen is the same as the Receive Log List By Host screen. When you read the description, replace the word 'send' with 'receive.'
-
If you use instant transfer to send a file to a host that is not registered in the Host Information, you cannot check the Send Log on the Send Log List By Host screen. To check the results of the instant transfer, select the file ID "_INSTANT_TRANSFER_" on the Send File List screen.
Send Log List By Host Screen
The Send Log List By Host screen displays a list of Send log records by host.
For details on how to display the screen, refer to Confirmation of the Log Lists By Host.
<<Send Log List By Host>> 1 - 4 / 4
COMMAND ==> SCROLL ===> PAGE
Host Name : ZOS
File ID Start Start End Status Record
Date Time Time Code Count
FILE0001 12/29/2017 10:02:13 10:02:15 0000(0000) 000000025/000000025
FILE0001 12/29/2017 10:03:29 10:03:30 0000(0000) 000000025/000000025
FILE0001 12/29/2017 10:04:18 10:04:19 0000(0000) 000000025/000000025
FILE0001 12/29/2017 10:12:54 10:12:55 0000(0000) 000000025/000000025
******************************* Bottom of data ********************************
Screen 4.10 Send Log List By Host Screen
<Explanation of Each Field>
- File ID
-
This field shows either of the following file IDs (first 8 bytes):
-
The file ID of the file that is sent to the host whose host name you selected on the Send Host List screen
-
The file ID of the file that is sent to the host whose host name you set on HULFT Main Menu screen
-
- Start Date
-
This field shows the start date of the Send processing.
- Start Time
-
This field shows the start time of the Send processing.
- End Time
-
This field shows the end time of the Send processing.
- Status Code
-
This field shows the status code of the Send processing.
The display format is 'Status code (Detail code).'
For details on status codes and detail codes, refer to Error Codes and Messages.
- Record Count
-
This field shows the record count of the Send file.
The display format of this field is 'number of records that were already sent/total record count of the Send file.'
What is displayed for the total record count of the Send file varies depending on the transfer mode, as follows:
- Direct Transfer:
-
000000000
- Work File Transfer:
-
Total record count of the Send file
For the result of the Send processing that HULFT carried out after acknowledging the Resend File or the Send Request, the total record count of the Send file is displayed, regardless of whether the transfer mode is the Direct Transfer or the Work File Transfer.
= Remarks =The Record Count on the Receive Log List By Host screen shows the number of records that were already received.
To display the latest Send log list by host or the latest Receive log list by host, enter 'R' for the COMMAND and press the Enter key.
Send Log List By Host screen (with full display of File ID)
The Send Log List by Host screen (with full display of the File ID) displays each file ID in an extended display area.
To display the Send Log List by Host screen (with full display of the File ID), enter 'EXTENT' or 'E' for the COMMAND on the Send Log List By Host screen and press the Enter key.
To return to the Send Log List By Host screen, enter 'BASIC' or 'B' for the COMMAND on the Send Log List by Host screen (with full display of the File ID) and press the Enter key.
<<Send Log List By Host>> 1 - 4 / 4
COMMAND ==> SCROLL ===> PAGE
Host Name : ZOS
File ID Start Status
Date Code
FILE00018TOKYO8TO8NEWYORK 12/29/2017 0000(0000)
FILE00018TOKYO8TO8NEWYORK 12/29/2017 0000(0000)
FILE00018TOKYO8TO8NEWYORK 12/29/2017 0000(0000)
FILE00018TOKYO8TO8NEWYORK 12/29/2017 0000(0000)
******************************* Bottom of data ********************************
Screen 4.11 Send Log List By Host Screen (with Full Display of File ID)
<Explanation of Each Field>
- File ID
-
This field shows either of the following file IDs (50 bytes):
-
The file ID of the file that is sent to the host whose host name you selected on the Send Host List screen
-
The file ID of the file that is sent to the host whose host name you set on HULFT Main Menu screen
-
- Start Date
-
This field shows the start date of the Send processing.
- Status Code
-
This field shows the status code of the Send processing.
The display format is 'Status code (Detail code).'
For details on status codes and detail codes, refer to Error Codes and Messages.
Send Log List By Host screen (with display of Identifier)
The Send Log List By Host screen (with display of the Identifier) displays the identifier.
To display the Send Log List By Host screen (with display of the Identifier), enter 'ID' or 'I' for the COMMAND on the Send Log List By Host screen and press the Enter key.
To return to the Send Log List By Host screen, enter 'BASIC' or 'B' for the COMMAND on the Send Log List By Host screen (with display of the Identifier) and press the Enter key.
<<Send Log List By Host>> 1 - 4 / 4
COMMAND ==> SCROLL ===> PAGE
Host Name : ZOS
File ID Identifier
FILE00018TOKYO8TO8NEWYORK 7377770869B74349300000920000010111
FILE00018TOKYO8TO8NEWYORK 737777086E3D0B24680000920000010111
FILE00018TOKYO8TO8NEWYORK 737777087114DDF9900000920000010111
FILE00018TOKYO8TO8NEWYORK 737777088FE66796D80000920000010111
******************************* Bottom of data ********************************
Screen 4.12 Send Log List By Host Screen (with Display of Identifier)
<Explanation of Each Field>
- File ID
-
This field shows either of the following file IDs (first 30 bytes):
-
The file ID of the file that is sent to the host whose host name you selected on the Send Host List screen
-
The file ID of the file that is sent to the host whose host name you set on HULFT Main Menu screen
-
- Identifier
-
This field shows the identifier for each transaction.
Send Log List By Host screen (with display of Data Set Name)
On the Send Log List By Host screen (with display of Data Set Name), data set names are displayed.
To display the Send Log List By Host screen (with display of Data Set Name), enter "DSNAME" or "D" for COMMAND on the Send Log List By Host screen and press the Enter key.
To return to the Send Log List By Host screen, enter "BASIC" or "B" for COMMAND on the Send Log List By Host screen (with display of Data Set Name) and press the Enter key.
<<Send Log List By Host>> 1 - 4 / 4
COMMAND ==> SCROLL ===> PAGE
Host Name : ZOS
File ID Data Set Name Start RC
Date
FILE0001 HULFT.DATE1(SND) 12/29/2017 0000
FILE0001 HULFT.DATE1(SND) 12/29/2017 0000
FILE0001 HULFT.DATE1(SND) 12/29/2017 0000
FILE0001 HULFT.DATE1(SND) 12/29/2017 0000
******************************* Bottom of data ********************************
Screen 4.13 Send Log List By Host screen (with display of Data Set Name)
<Explanation of each field>
- File ID
-
This field shows either of the following file IDs (first 8 bytes):
-
The file ID of the file that is sent to the host whose host name you selected on the Send Host List screen
-
The file ID of the file that is sent to the host whose host name you set on HULFT Main Menu screen
-
- Data Set Name
-
This field shows the data set name of the send file.
- Start Date
-
This field shows the start date of the Send processing.
- RC
-
This field shows the status code of the Send processing.
For details on status codes, refer to Error Codes and Messages.