Operation Log List Display messages
- * XROPLLST *
-
OPEN FAILED DDNAME=ddname
- Description:
-
Failed to open the output destination file for the operation log.
- Measures:
-
Check the data set specified in the JCL statement.
- * XROPLLST *
-
XRFLPUT PUT FAILED
- Description:
-
Failed to write records to the output destination file for the File Access Log.
- Measures:
-
The capacity of the output file may be insufficient, or there could be another cause. Check the capacity and attributes of the output file, and then try creating it again.
- * XROPLLST *
-
XRCLPUT PUT FAILED
- Description:
-
Failed to write records to the output destination file for the Command Execution Log.
- Measures:
-
The capacity of the output file may be insufficient, or there could be another cause. Check the capacity and attributes of the output file, and then try creating it again.
- * XROPLLST *
-
LOG RECORD NOT EXIST
- Description:
-
The applicable operation log record does not exist.
- Measures:
-
The applicable record does not exist in the conditions specified by the user.
- * XROPLLST *
-
LOG FILE NOT EXIST
- Description:
-
The Operation Log file that was searched for does not exist.
- Measures:
-
Check the Operation Log file that was searched for, and try again.
- * XROPLLST *
-
EXEC PARAMETER ERROR
- Description:
-
This is an execution (EXEC statement) parameter error.
- Measures:
-
Correctly specify the execution (EXEC statement) parameter, and try again.
- * XROPLLST *
-
XRCRD PARAMETER ERROR
- Description:
-
The definition method of the XRCRD definition card is incorrect.
- Measures:
-
Check the XRCRD definition card.
- * XROPLLST *
-
INVALID CARD DCB
- Description:
-
The record length or the record format defined on the XRCRD definition card is incorrect.
- Measures:
-
Correct the setting, and try again.
- * XROPLLST *
-
BUFFER OVERFLOW
- Description:
-
The buffer capacity has been exceeded due to the XRCRD definition card processing.
- Measures:
-
Reduce the number of parameters defined on the definition card.
- * XROPLLST *
-
FL/CL DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the operation log.
- Measures:
-
Correctly specify the operation log, and try again.
- * XROPLLST *
-
HOST DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the Host Name.
- Measures:
-
Correctly specify the Host Name, and try again.
- * XROPLLST *
-
USR/ADMUSR DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the user ID.
- Measures:
-
Correctly set the user ID, and try again.
- * XROPLLST *
-
OP DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the operation name.
- Measures:
-
Correctly specify the operation name, and try again.
- * XROPLLST *
-
FILE DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the type of system file.
- Measures:
-
Correctly specify the type of system file, and try again.
- * XROPLLST *
-
PRCID DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the Identifier.
- Measures:
-
Correctly set the Identifier, and try again.
- * XROPLLST *
-
YMDHMS DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the Date/Time.
- Measures:
-
Correctly set the Date/Time, and try again.
- * XROPLLST *
-
HOST IS INVALID HOST=host
- host:
-
Host Name
- Description:
-
There is an error in the specification for the Host Name.
- Measures:
-
Correctly specify the Host Name, and try again.
- * XROPLLST *
-
USR/ADMUSR IS INVALID USR=usr
- usr:
-
User ID
- Description:
-
There is an error in the specified user ID.
- Measures:
-
Correctly set the user ID, and try again.
- * XROPLLST *
-
OP IS INVALID OP=op
- op:
-
Operation name
- Description:
-
There is an error in the operation name.
- Measures:
-
Correctly specify the operation name, and try again.
- * XROPLLST *
-
FILE IS INVALID FILE=file
- Description:
-
There is an error in the specified type of system file.
- Measures:
-
Correctly specify the type of system file, and try again.
- * XROPLLST *
-
PRCID IS INVALID PRCID=prcid
- prcid:
-
Identifier
- Description:
-
There is an error in the specified Identifier.
- Measures:
-
Correctly set the Identifier, and try again.
- * XROPLLST *
-
YMDHMS IS INVALID YMDHMS=ymdhms
- ymdhms:
-
Date/Time
- Description:
-
There is an error in the specified Date/Time.
- Measures:
-
Correctly set the Date/Time, and try again.
- * XROPLLST *
-
INSUFFICIENT MEMORY
- Description:
-
The available memory is insufficient to run this program.
- Measures:
-
Either reduce the number of files to search for or increase the REGION size, and try again.
- * XROPLLST *
-
OPEN FAILED OPLFILE=oplfilename
- oplfilename:
-
Operation log input file
- Description:
-
Failed to open the input file for the operation log.
- Measures:
-
Check the fields related to the operation log in the System Environment Settings.
- * XROPLLST *
-
CARD-NO:nn* **PARAMETER CARD OVER**
- Description:
-
The number of definition cards exceeds 100.
- Measures:
-
Reduce the number of definition cards to 100 or less.
- * XROPLLST *
-
FILE ACCESS LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
FILE ACCESS LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
COMMAND LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
COMMAND LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
OPLFILEBK ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate the File Access Log Backup file.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
OPLCMDBK ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate the Command Execution Log Backup file.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- * XROPLLST *
-
OPLFILEBK NOT FOUND
- Description:
-
Cannot find the File Access Log Backup Output Data Set.
- Measures:
-
Correctly specify the File Access Log Backup Output Data Set, and try again.
- * XROPLLST *
-
OPLCMDBK NOT FOUND
- Description:
-
Cannot find the Command Access Log Backup Output Data Set.
- Measures:
-
Correctly specify the Command Access Log Backup Output Data Set, and try again.
- * XROPLLST *
-
OPLFILEBK OPEN FAILED RC=code
- code:
-
Error code
- Description:
-
Failed to open the File Access Log Backup Output Data Set.
- Measures:
-
Check the file specified in the System Environment Settings.
- * XROPLLST *
-
OPLCMDBK OPEN FAILED RC=code
- code:
-
Error code
- Description:
-
Failed to open the Command Execution Log Backup Output Data Set.
- Measures:
-
Check the file specified in the System Environment Settings.
- * XROPLLST *
-
FAILED IN SEARCHING THE SUBSEQUENT FILE TO DSN=oplfilename
- oplfilname:
-
Name of the last absolute generation data set (GDS) that was processed correctly
- Description:
-
After processing of the data set shown above was completed, an error occurred in the next data set.
- Measures:
-
Check the data set where the error occurred. Make a backup if necessary, and then remove the data set where the error occurred and try again.
- * XROPLLST *
-
DATE/YMDHMS DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the Date/Time.
- Measures:
-
Correctly set the Date/Time, and try again.
- * XROPLLST *
-
DATE DUPLICATE ERROR
- Description:
-
Duplicate specifications exist for the Date/Time.
- Measures:
-
Correctly set the Date/Time, and try again.
- * XROPLLST *
-
DATE IS INVALID DATE=ymdhms
- Description:
-
There is an error in the specified Date/Time.
- Measures:
-
Correctly set the Date/Time, and try again.
- * XROPLLST *
-
CARD-NO:nn
- Description:
-
This is the specified number of the definition card where the error was detected.
- Measures:
-
Look up the measures to take for the error message that was output when the error was detected.
- * XROPLLST *
-
OPLCMD1 IS NOT SPECIFIED; OPLCMD2 IGNORE
- Description:
-
There is an error in the specification for Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Correctly specify Command Execution Log file 1 (HULFT.OPLCMD1), and try again.
- * XROPLLST *
-
OPLCMD2 IS NOT SPECIFIED; OPLCMD1 IGNORE
- Description:
-
There is an error in the specification for Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Correctly specify the Command Execution Log file 2 (HULFT.OPLCMD2), and try again.
- * XROPLLST *
-
OPLFILE1 IS NOT SPECIFIED; OPLFILE2 IGNORE
- Description:
-
There is an error in the specification for File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Correctly specify the File Access Log file 1 (HULFT.OPLFILE1), and try again.
- * XROPLLST *
-
OPLFILE2 IS NOT SPECIFIED; OPLFILE1 IGNORE
- Description:
-
There is an error in the specification for File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Correctly specify the File Access Log file 2 (HULFT.OPLFILE2), and try again.