Receive Detail Information screen
On this screen, you can check details of the Receive log.
The Receive Detail Information screen is shown as follows:
<Explanation of each field>
- File ID
-
The file ID registered in the Receive Management Information is displayed.
= Remarks =When instant transfer is used for a transfer, "_INSTANT_TRANSFER_" is displayed for the file ID in the log record.
- Send Host
-
The name of the sending host is displayed.
- File Name
-
The name of the Receive file is displayed.
- Receive Date
-
The date on which receiving starts is displayed.
The date is expressed in the format of "Start time of receiving - End time of receiving."
= Remarks =The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.
For details, refer to Administration Manual.
- Status Code
-
The status code of receiving is displayed.
The code is expressed in the format of "status code-detail code."
Refer to Error Codes and Messages for more information on the status code and the detail code.
- Interface DBID
-
The Interface DBID registered in the Send Management Information is displayed.
- IP Version (ipversion)
-
The IP version that is transmitted is displayed.
- IPv4:
-
Connected at IPv4
- IPv6:
-
Connected at IPv6
- Record Count
-
The number of records of received files is displayed.
- Data Size
-
The data size of the received file is displayed. The unit is byte.
- Transmission Rate
-
The transfer data length per second is displayed. The unit is byte.
- Identifier
-
The identifier that links the Receive Log and the operation log is displayed.
- Encryption Used
-
This field displays the type of the Encryption Scheme that is used for the transfer.
- -:
-
Transfer does not use ciphers
- HULFT:
-
HULFT Encryption Scheme
- C4S:
-
HULFT Cipher Option (C4S)
- AES:
-
HULFT Cipher Option (AES)
- OTHER:
-
Encryption Scheme other than the above
- Transfer ID
-
The unique identifier that is issued for the file transfer is displayed.
- Compression Preference
-
The compression preference that is used for the transfer is displayed.
- None:
-
Transfer data without using compression
- Horizontal:
-
Transfer data using horizontal compression (compression within records)
- Vertical:
-
Transfer data using vertical compression (compression across records)
- DEFLATE:
-
Transfer data using DEFLATE compression
When a log file for a lower version is converted, "---" is displayed.
- Connection Type
-
The mode of connection to the sending host is displayed.
- LAN:
-
LAN connection
- Comment
-
The comment that is registered in the Receive Management Information for the transfer is displayed.
- Job
-
When the Post-receive Job is executed, the job execution log is displayed in the Receiving Side Job Status section.
For details, refer to Case where the Post-receive Job is executed.
- Message
-
When the message is used, the contents are displayed in the Message section.
For details, refer to Case where the message is used.
- HULFT Script
-
When HULFT Script is executed, the script execution result is displayed in the HULFT Script section.
For details, refer to Case where HULFT Script is executed.
- Description
-
The description of the error is displayed.
- Measure
-
The measure for the error is displayed.
Case where the Post-receive Job is executed
When the Post-receive Job is executed, the job execution log is displayed in the Receiving Side Job Status section.
<Explanation of each field>
- Job Execution Date
-
The date on which the job that was last executed is displayed.
= Remarks =The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.
For details, refer to Administration Manual.
- Job Name
-
The name of the job that is activated after completion of Receive processing is displayed.
- Start Time
-
The time when the job starts is displayed.
- End Time
-
The time when the job ends is displayed.
- Status
-
The completion status of the job is displayed.
- 0:
-
Successful end
- Other than 0:
-
Unsuccessful end (the exit status of the startup job)
Regarding the Receiving Side Job Status, if the status code is "0", successful job execution is displayed and, if the status code is other than "0", unsuccessful job execution information is displayed.
When the sending job is not executed as there is no entry of the job ID in the Job Information or due to a definition error in the Job Information, the Start Time and End Time of the Receiving Side Job Status section are "9".
Case where the message is used
When the message is used, the contents are displayed in the Message section. When no value is specified, it is displayed as blank.
<Explanation of each field>
- Message 0 to Message 5
-
The message that is received from the source is displayed.
- Long Message 0 to Long Message 1
-
The long message that is received from the source is displayed.