Send errors (E3xxxxx)

E305022

Description:

The length of the transmitted message exceeds the limit for the field %s in the Send Management Information.

E305023

Description:

Invalid character string has been specified in the transmitted message for the field %s in the Send Management Information.

E305024

Description:

No message has been specified for the field %s in the Send Management Information.

E330005

Description:

HULFT on the receiving host does not support the specified Code Conversion. Unable to send the data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the setting of Code Conversion in the Send Management Information.

E330006

Description:

HULFT on the receiving host does not support the format transfer. Unable to send the data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330010

Description:

An exception occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E330017

Description:

HULFT on the receiving host does not support Transfer Unit setting that exceeds 32767 bytes. Unable to send the data.

Measure:

Revise the settings so that the Transfer Unit size (Transfer Block Length x Transfer Block Count in the Send Management Information) does not exceed 32767 bytes.

E330018

Description:

HULFT on the receiving host does not support multi format transfer. Unable to send the data.

E330019

Description:

HULFT on the receiving host does not support the Send file size that exceeds 2GB. The data is unable to be sent.

Measure:

Check the Send file size.

E330020

Description:

HULFT on the receiving host does not support Code Conversion setting that converts data with no shift code on the receiving side. Unable to send the data.

Measure:

It is not possible to send data to the version of HULFT on the receiving host when you specify the following settings in the Send Management Information at the same time:

• Code Conversion is set to 'Receiving Side'

• Shiftcode Mode is set to 'Do not add'.

To carry out Code Conversion on the receiving host, set Shiftcode Mode to 'Add'.

E330021

Description:

HULFT on the receiving host cannot convert the Signed Decimal attribute.

Measure:

The version of HULFT on the receiving host does not support attribute conversion of P (Signed Internal Decimal) type or S (Signed External Decimal) type. Specify 'Send' for Code Conversion in the Send Management Information.

E330025

Description:

An error occurred in the encryption exit routine termination processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330030

Description:

The receiving host is the version which cannot execute SAN-transfers. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Review the Host Information settings.

E330032

Description:

Unable to execute SAN (XLD) transfers because the option that supports relevant SAN Interface is not installed on the receiving host, even though the specification of Connection Type is SAN (XLD). (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Review the setting of Connection Type in the Host Information.

E330035

Description:

Failed to convert the code during the Send processing. (Receive host name=%s, File ID=%s) (error code=%d,%05d)

Measure:

Check if the Send file data matches the Format Information or the Multi Format Information specified for Format/Multi Format ID in the Send Management Information.

E330041

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330046

Description:

Unable to connect to the receiving host socket.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330047

Description:

An error occurred when obtaining MSS from the network.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330049

Description:

Unable to connect to the receiving host socket.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330050

Description:

The instant transfer will be terminated because the product version of the receiving host is not a version that can perform an instant transfer. (Receiving host name=%s)

Measure:

Check the product version of the receiving host.

E330051

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330052

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330053

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330054

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E330055

Description:

An error occurred when obtaining MSS from the network. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E331045

Description:

An exception occurred during the Send thread initialization processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E331046

Description:

An error in the specification of the Send file drive.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the existence of drive specified by File Name of the Send Management Information.

E331047

Description:

Unable to open the Send file due to other processes being used. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Increase the setting value for Retry Count on Locked Send File in the System Environment Settings, or wait until the other process releases the Send file and send the data.

E331048

Description:

Opening of the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E331049

Description:

Opening of the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E331052

Description:

Unable to execute the Checkpoint Resend File as the Send file size differs from when the file was first sent. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E331058

Description:

In the Send Management Information, Send File Mode is set to 'Delete', but HULFT failed to acquire the lock of the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the error code, and take appropriate measures.

E331059

Description:

In the Send Management Information, Send File Mode is set to 'Delete', but HULFT failed to acquire the lock of the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the error code, and take appropriate measures.

E331061

Description:

Unable to open the Send file due to other process being used. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Increase the setting value for Retry Count on Locked Send File in the System Environment Settings, or wait until the other process releases the Send file and send the data.

E331062

Description:

Failed to acquire the networked file lock of the Send file (%s) (Error code=%d, Receiving host name=%s, File ID=%s).

Measure:

Check the contents and error code of %s. The displayed error code is the one returned by the operating system. Refer to the Windows API Document. Based on that, check the following and retry the Send process:

• Whether you can refer to the relevant file path

• Whether you have Read and Write permissions for the relevant file

• Whether you can acquire the lock for the relevant file.

E331069

Description:

Code conversion is not possible for the specified combination of Code Set for Transfer (Code Set for Transfer on sending side=%c, Code Set for Transfer on receiving side=%c).

Measure 1:

For regular transfer, check that the following combination of code sets is supported: (a) The remote host's code set specified as Code Set for Transfer (KCODETYPE) in the Host Information; and (b) Code Set for Transfer (cs4trnsfr) specified in the System Environment Settings.

Measure 2:

For instant transfer, check that the combination of code sets that are specified as Code Set for Transfer (cs4trnsfr) in the System Environment Settings on the remote and local hosts is supported.

E331071

Description:

Code conversion is not possible for the specified combination of Code Set for Transfer and EBCDIC Set (Code Set for Transfer=%c, EBCDIC Set=%c).

Measure 1:

For regular transfer, check that the combination of code sets specified for the following fields is supported: (a) Code Set for Transfer (KCODETYPE) in the Host Information, and (b) EBCDIC Set in the Send or Receive Management Information.

Measure 2:

For instant transfer, check that the combination of the values for the following fields in the System Environment Settings on the remote host is supported: (a) Code Set for Transfer (cs4trnsfr), and (b) Instant Transfer EBCDIC Set.

Also, make sure that the version of HULFT on the local host is a version in which code conversion from/to the code set specified as Instant Transfer EBCDIC Set in the System Environment Settings on the remote host is supported.

E331077

Description:

The instant transfer will be terminated because the product version of the receiving host is not a version that can perform an instant transfer. (Receiving host name=%s)

Measure:

Check the product version of the receiving host.

E331078

Description:

Inconsistency is found between Forced Strong Key mode set in the System Environment Settings and the length of the cipher key specified in management information. (Receiving host name=%s, File ID=%s) (Error code=%03d, %05d)

Measure:

If Forced Strong Key mode is enabled, use a cipher key of 64 digits hexadecimal character string.

If Forced Strong Key mode is disabled, use a cipher key of 0 or 8 to 20 bytes alphanumeric character string.

E331079

Description:

If a file name specified for File Name in the Send Management Information includes "://", only "Keep" (K) can be specified for Send File Mode. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E332001

Description:

Failed to send the file information message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E332002

Description:

An exception occurred during the file information message sending processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E333001

Description:

Failed to receive the receive confirmation message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E333002

Description:

An error occurred on the receiving host (Error code=%d, Receiving host name=%s, File ID=%s).

Measure:

Check the Receive status and the Console Log of the receiving host.

E333003

Description:

An exception occurred when receiving the receive confirmation message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E333004

Description:

An unknown message is received during the receiving processing of the receive confirmation message. The wrong port number may be specified.

Measure:

Check if the setting value of Receive Port No. for the receiving host that is registered in the Host Information on the sending host matches the setting value of Receive Port No. in the System Environment Settings on the receiving host.

E333007

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E333008

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334001

Description:

Failed to allocate buffer memory for sending data message.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334002

Description:

Movement of the file pointer failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334003

Description:

Movement of the file pointer failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334004

Description:

Reading of the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334005

Description:

An exception occurred during the data message sending processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E334006

Description:

Reading of the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334007

Description:

The line length in the Send file exceeds 32767 bytes. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Set the line length to 32767 bytes or less.

E334011

Description:

Failed to allocate buffer memory for reading the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334012

Description:

Failed to allocate buffer memory for Code Conversion of the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334013

Description:

Failed to allocate buffer memory for compression of the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334014

Description:

Reading the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334015

Description:

The movement of the file pointer of the Send file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334019

Description:

An error occurred when opening the Format Information file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Format Information file (hulfmt.db) exists.

E334020

Description:

Reading the Format Information file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334021

Description:

An error occurred when allocating memory for the Format Information. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E334022

Description:

Reading the Format Information file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334023

Description:

An error occurred in sending the data message.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E334024

Description:

Movement of the file pointer failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334026

Description:

The line length after Code Conversion exceeds 32767 bytes.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Specify 'Receiving Side' for Code Conversion in the Send Management Information, and then try sending.

E334027

Description:

The line length after compression exceeds 32767 bytes. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Specify 'None' for Compression Preference in the Send Management Information, and then try sending.

E334030

Description:

Encryption of the data failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334032

Description:

Inconsistency is found between the Format Information specified in the Send Management Information and the Send file data.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the Format Information specified by Format/Multi Format ID in the Send Management Information matches the Send file record format.

E334033

Description:

Failed to convert the Format Information attribute.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334034

Description:

An error occurred in the encryption exit routine. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the error code, and take appropriate measures. Then, retry the transfer.

E334036

Description:

A communication error occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E334037

Description:

A communication time-out occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Raise the set value of Socket Read Timeout in the System Environment Settings.

E334044

Description:

Creation of a timer object failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334045

Description:

An error occurred in the detecting processing of time-out. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334046

Description:

The initial processing for the DEFLATE compression failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334047

Description:

Failed to compress data with the DEFLATE compression. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334048

Description:

Failed to compress data with the DEFLATE compression. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334049

Description:

Failed to process horizontal compression.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334050

Description:

Failed to process vertical compression.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E334051

Description:

The Format Information has not been registered. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Register the Format Information.

E334053

Description:

Unable to transfer the file because Forced Strong Key mode is off on the remote host. Enabling Forced Strong Key mode is required on both side. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check either of the following conditions are met:

• The remote host runs HULFT lower than Ver.8.4.

• The product of the remote host is a No Encryption.

• Forced Strong Key mode on the remote host is off.

E335004

Description:

Failed to send the Format Information. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E335005

Description:

An exception occurred during the database message sending processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E336003

Description:

A program exception occurred in the end processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E336004

Description:

Unable to seek the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E336005

Description:

Unable to clear the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E336006

Description:

An exception occurred in the end processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E336010

Description:

Failed to delete the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E337003

Description:

An error occurred when opening the Job Information file (hulexedb.dat).

E337004

Description:

Job ID registered in the Send Management Information has not been registered in the Job Information (File ID=%s, Job ID=%s).

Measure:

Check the Job Information based upon the Post-send Job ID specified by the Send Management Information.

E337005

Description:

Access permissions to the Job Information file (hulexedb.dat) is not granted.

Measure:

Grant permission to access the Job Information file (hulexedb.dat) to the user specified for Account Name in the System Environment Settings.

E337009

Description:

An error occurred when executing the Post-send Job (File ID=%s, Job Name=%s, Job ID=%s, Error code=%d).

Measure:

Check that the job registered in the relevant Job Information exists.

E337010

Description:

An exception occurred during the job start-up processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E337011

Description:

An error occurred when writing to the Post-send Job Execution Log file (hulexlgs.dat). (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Grant permission to access the Post-send Job Execution Log file (hulexlgs.dat) to the user specified for Account Name in the System Environment Settings.

E337012

Description:

An error in the specification of the execution file specified in the Post-send Job. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the Job Information settings specified for Successful Job ID or Unsuccessful Job ID in the Send Management Information.

E337014

Description:

Size of the job name is too long (Job name=%s, File ID=%s).

Measure:

Check the Job Information settings specified for Successful Job ID or Unsuccessful Job ID in the Send Management Information.

E337019

Description:

An error occurred when executing the Post-send Job (File ID=%s, Job Name=%s, Job ID=%s, Error code=%d).

Measure:

Check the contents of the Job Information.

E338001

Description:

An error occurred while writing to the Send Log file (hulsndlg.dat). (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Grant permission to access the Send Log file (hulsndlg.dat) to the user specified for Account Name in the System Environment Settings.

E338002

Description:

An exception occurred during the Send Log file (hulsndlg.dat) write processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E338005

Description:

Failed to issue a request to HULFT Script (HTTP status code=%d).

Measure:

Check the HTTP status code and take measures.

E338007

Description:

Failed to issue a request to HULFT Script.

Measure:

Check the settings of HULFT Script Port No.

E339003

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E339004

Description:

Unable to send the message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E339005

Description:

An exception occurred during the sending processing of message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E340002

Description:

An exception occurred during writing processing into the Resend Queue file (sddreqls.dat).

Measure:

The Send process has become unstable. Restart the Send process.

E340005

Description:

Failed to aquire the lock of the Resend Queue file (sddreqls.dat).

E341001

Description:

Unable to send the checkpoint sending message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E341002

Description:

An exception occurred during the sending processing of the checkpoint sending message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E341003

Description:

An error occurred when allocating memory for the checkpoint sending message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E341006

Description:

Unable to encrypt the data during the sending of the checkpoint sending message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E341007

Description:

Unable to encrypt the data during the sending processing of the checkpoint sending message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E343001

Description:

An exception occurred when converting code. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E343004

Description:

Failed to convert the code during the Send processing. (Character code=[%s], Receive host name=%s, File ID=%s) (error code=%d,%05d)

E343005

Description:

Failed to convert the code during the Send processing. (Character code=[%s], Receive host name=%s, File ID=%s) (error code=%d,%05d)

E343008

Description:

No EBCDIC user table is registered. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure 1:

Register the content of the EBCDIC user table specified for EBCDIC Set (CODESET) in the Send Management Information on the local host.

Measure 2:

Register the content of the EBCDIC user table specified for EBCDIC Set (CODESET) in the Send Management Information on the receiving-side host.

E343009

Description:

No EBCDIC user table is registered. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure 1:

Register the content of the EBCDIC user table specified for EBCDIC Set (CODESET) in the Send Management Information on the local host.

Measure 2:

Register the content of the EBCDIC user table specified for EBCDIC Set (CODESET) in the Send Management Information on the receiving-side host.

E344001

Description:

An exception occurred during the Checkpoint Resend Request processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E344004

Description:

An error occurred on the remote host (Error code=%d, Sending host name=%s, File ID=%s).

Measure:

Check the Receive Log file and the Console Log of the remote host.

E346001

Description:

A communication error occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E346002

Description:

A communication error occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E346003

Description:

An error occurred on the PROXY Server side (Error code==%d, Receiving Host Name=%s, File ID=%s) .

Measure:

Check the PROXY Server's error code and implement the necessary corrections.

E346004

Description:

A communication error occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E346005

Description:

An exception occurred during the PROXY message sending processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E346006

Description:

Unable to connect to HULFT FireWall, or HULFT-HUB Server lower than Ver.2.2.

Measure:

Check the version of the product at the connection destination.

E347001

Description:

A communication error occurred. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E347002

Description:

The Multi Format Information has not been registered. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Register the Multi Format Information.

E347003

Description:

No access permission to the Multi Format Information file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check that permission is granted to access the Multi Format Information file (hulmfmtdb.dat).

E347005

Description:

An error occurred when opening the Multi Format Information file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check that the Multi Format Information file (hulmfmtdb.dat) exists and that appropriate permissions to access the files have been set.

E347006

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E347007

Description:

Failed to open the Format Information file (%s) (Receiving host name=%s, File ID=%s, Error code=%d-%d).

Measure:

Check the existence of the Format Information file and check whether the file is in use by another process.

E347008

Description:

Reading the Format Information file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Format Information file (hulfmtdb.dat) is in use by another process.

E347009

Description:

Inconsistency is found between the Format Information and data of the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the Send file data matches the Format Information or the Multi Format Information specified for Format/Multi Format ID in the Send Management Information.

E347022

Description:

The Format Information has not been registered. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Register the Format Information.

E348001

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E348002

Description:

An error occurred while attempting to seek the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Send file is in use by another process.

E348003

Description:

Reading of the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Send file is in use by another process.

E348004

Description:

An invalid key value is found in the Multi Format Information.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the Send file data matches the Format Information or the Multi Format Information specified for Format/Multi Format ID in the Send Management Information.

E348007

Description:

Record length exceeds maximum limit after compression.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Specify 'None' for Compression Preference in the Send Management Information, and retry the transfer operation.

E348009

Description:

Inconsistency is found between the Multi Format Information and data of the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the Send file data matches the Format Information or the Multi Format Information specified for Format/Multi Format ID n the Send Management Information.

E349001

Description:

Insufficient usable memory.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E349002

Description:

Error occurred while attempting to seek the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Send file is in use by another process.

E349003

Description:

Reading the Send file failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Send file is in use by another process.

E349005

Description:

Record length exceeds maximum limit after compression.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Specify 'None' for Compression Preference in the Send Management Information, and retry the transfer operation.

E350004

Description:

HULFT for Windows does not support Mail Interface. (Receiving host name=%s, File ID=%s, Mail Interface ID=%s).

E351001

Description:

(%d) Unable to generate a RAID-Transfers thread. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E351008

Description:

The setting of Code Conversion for the Send Management Information is invalid. Specify either 'Sending Side' or 'No-conversion'. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Measure : Convert the code with the Sending host, or transfer the code via a LAN.

E351010

Description:

Unable to read the Shared volume. (Receiving host name=%s, File ID=%s, Dataset Name=%s, Volume Serial Number=%s)

Measure:

Unable to open data set on the intermediate volume. Check the Volume Definition file, as well as the Receive Management Information settings on the destination host of sending.

E351013

Description:

An exception occurred during the RAID Interface Main processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E351014

Description:

Failed to close the dataset. (Receiving host name=%s, File ID=%s, Dataset Name=%s, Volume Serial Number=%s)

E351015

Description:

The Interface driver for RAID is not available. (Receiving host name=%s, File ID=%s, Status Code=%d, Detail Code=%d)

E352001

Description:

Unable to send the message of the RAID Interface Dataset information. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E352002

Description:

(%d) An exception occurred when sending the message of the RAID Interface Dataset information. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E353001

Description:

Failed to receive messages.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E353002

Description:

Unable to receive the message of the RAID Interface Dataset information. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E353003

Description:

Failed to receive the abnormal message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E353004

Description:

HULFT received the unknown message during the receiving processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E353005

Description:

An exception occurred in the receiving processing. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E353008

Description:

An error occurred on the receiving host. (Error code==%d, Receiving host name=%s, File ID=%s)

Measure:

Check the Receive Log File at the send destination.

E354002

Description:

An exception occurred during RAID Transfer.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The Send process has become unstable. Restart the Send process.

E354003

Description:

Transfer type is invalid.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E354004

Description:

Failed to write into the dataset.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E354005

Description:

Failed to allocate the memory of the buffer.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E354006

Description:

There is Inconsistency between the Format Information and the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the Format Information matches the Send file record format.

E354009

Description:

Failed to write because the record length of the Send file is longer than definition.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Make the setting of the record length of the file on the counterpart side longer.

E355001

Description:

Failed to read the sending data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E355002

Description:

There are too many number of characters per line in the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The record exceeds 32767 bytes, which is the maximum length. Make the number of characters 32767 bytes or less and execute transfer.

E355003

Description:

The Code Conversion of the Send file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the contents of the data.

E355006

Description:

Failed to allocate the memory of the buffer.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E355007

Description:

The invalid key exists in the data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Multi-Format Information and the Format Information.

E355008

Description:

There is inconsistency between the data and the Multi-Format Information.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Multi-Format Information and the Format Information.

E356001

Description:

Unable to close the dataset on verify process.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E356002

Description:

Unable to open the dataset on verify process.

E356003

Description:

Failed to acquire dataset information.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E356004

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check whether the Send file is being used by other processes or not.

E356005

Description:

Failed to read the dataset.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E356006

Description:

Invalid transfer type.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E356007

Description:

Unable to open the dump file. (File Name=%s, Error Code=%d, %05d)

Measure:

Check the specification for the Dump File Generation Path and the access permissions.

E356008

Description:

Unable to write to the dump file. (File Name=%s, Error Code=%d, %05d)

Measure:

Check available disk space.

E356010

Description:

Failed to allocate the memory of the buffer.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E357001

Description:

Unable to open the Shared volume. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Refer to the XL Data Mover User Manual according to the last two digits of the error code.

E357004

Description:

Unable to output data to the Shared volume. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Refer to the XL Data Mover User Manual according to the last two digits of the error code.

E357005

Description:

The slice changeover failed.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Refer to the XL Data Mover User Manual according to the last two digits of the error code.

E357006

Description:

Unable to close the Shared volume. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Refer to the XL Data Mover User Manual according to the last two digits of the error code.

E357007

Description:

Unable to allocate memory during SAN-Transfers.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E357010

Description:

There is inconsistency between the Format Information and the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Format Information and the Multi-Format Information.

E357011

Description:

Unable to allocate memory during SAN-Transfers.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E357012

Description:

Unable to allocate memory during SAN-Transfers.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Retry the transfer operation after terminating unnecessary programs.

E357014

Description:

Failed to send data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E357015

Description:

Failed to send data. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the socket is connected.

E357016

Description:

An error occurred on the receiving host. (Error code==%d, Receiving host name=%s, File ID=%s)

Measure:

Check the Receive Log File at the send destination.

E357017

Description:

An error occurred on the receiving host. (Error code==%d, Receiving host name=%s, File ID=%s)

Measure:

Check the Receive Log File at the send destination.

E357019

Description:

The Interface driver for SAN is not available. (Receiving host name=%s, File ID=%s, Status Code=%d, Detail Code=%d)

Measure:

Check the environment. The displayed error code is the error code returned by the operating system. Refer to the Windows API Document.

E358001

Description:

Failed to read the Receive file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358002

Description:

There are too many number of characters per line in the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

The record exceeds 32767 bytes, which is the maximum length. Make the number of characters 32767 bytes or less and execute transfer.

E358003

Description:

The Code Conversion of the Send file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the contents of the data.

E358004

Description:

The record length exceeded 32767 bytes due to Code Conversion.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Execute the send operation by receiving side conversion.

E358005

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358006

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358007

Description:

The Code Conversion of the Send file failed. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the contents of the data.

E358008

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358009

Description:

There is an invalid key field in the data.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Multi-Format Information.

E358010

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358011

Description:

There is inconsistency between the Format Information and the Send file. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Format Information.

E358013

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358014

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E358015

Description:

There is an invalid key field in the data.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check if the sending data matches the Format Information.

E358016

Description:

Failed to read the Send file.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364001

Description:

A communication version error. Unable to use the specified setting (%s=%s).

E364002

Description:

A communication version error. Unable to use the specified setting (%s=%s).

E364003

Description:

A communication version error. Unable to use the specified setting (%s=%s).

E364006

Description:

Failed to send the message. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364007

Description:

Failed to receive the message.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364010

Description:

Unable to connect to the receiving host socket. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364011

Description:

Unable to connect to the receiving host socket.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364015

Description:

Failed to reserve memory during the Send processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364016

Description:

Failed to reserve memory during the Send processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364018

Description:

Failed to reserve memory during the Send processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364023

Description:

An error occurred on the receiving host. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

Measure:

Check the Receive status and the Console Log of the receiving host. (Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E364024

Description:

The instant transfer will be terminated because the product version of the receiving host is not a version that can perform an instant transfer. (Receiving host name=%s)

Measure:

Check the product version of the receiving host.

E364025

Description:

Unable to transfer the file because Forced Strong Key mode is off on the remote host. Enabling Forced Strong Key mode is required on both side. (Receiving host name=%s)

Measure:

Check either of the following conditions are met:

• The remote host runs HULFT lower than Ver.8.4.

• The product of the remote host is a No Encryption.

• Forced Strong Key mode on the remote host is off.

E364026

Description:

Unable to transfer the file because Use HULFT7 Comm. mode is enabled in the Host Information. To use Forced Strong Key mode, disable Use HULFT7 Comm. mode. (Receiving host name=%s)

Measure:

Disable the HULFT7 communication mode and reissue the request.

E365002

Description:

Failed to receive the message.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E365003

Description:

Failed to receive the message.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E365004

Description:

Failed to reserve memory during the Send processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E365005

Description:

Failed to reserve memory during the Send processing.(Receiving host name=%s, File ID=%s, Error code=%d, Detail code=%05d)

E366001

Description:

The initialization processing for reading the sending data failed (Error content=%s).

E366002

Description:

The read processing of the sending data failed (Error content=%s).

E366003

Description:

The termination processing executed after the reading of the sending data failed (Error content=%s).