Remote Job Execution command (utlrjob.exe)
1
- Description:
-
A parameter error occurred.
- Measure:
-
Check whether the entered parameter is correct.
2 The target host is not registered.
- Description:
-
The specified host name has not been registered in the Host Information.
- Measure:
-
Register the specified host name in the Host Information.
3 The Host Information error.
- Description:
-
An error occurred while obtaining the Host Information.
- Measure 1:
-
Check that the Host Information for the specified host name exists.
- Measure 2:
-
Check the access permissions for the Host Information files (hulhstdb.dat).
4 Socket error.
- Description:
-
An error occurred in the communication (socket error).
- Measure 1:
-
Check whether the Observe process has been started on the remote host.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
5 Unable to write to a socket.
- Description:
-
A communication error occurred (socket writing error).
- Measure 1:
-
Check whether the Observe process has been started on the remote host.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
- Measure 3:
-
To acknowledge the request from the remote host, increase the value for Connect Retry Count (retrycnt) in the System Environment Settings file (hulenv.cnf).
6 Unable to read a socket.
- Description:
-
A communication error occurred (socket reading error).
- Measure 1:
-
Check whether the Observe process has been started on the remote host.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
7 Reading a socket timed out.
- Description:
-
A communication error occurred (socket reading time-out error).
- Measure 1:
-
Check whether the Observe system has been started on the remote host.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
8 Unable to obtain the IP address.
- Description:
-
An error occurred while obtaining the IP address.
- Measure:
-
Register to the hosts file or DNS server.
9 Unable to connect.
- Description:
-
Failed to connect to the Observe process.
- Measure 1:
-
Check whether the Observe process has been started.
- Measure 2:
-
Check that the IP address and Observe Port No. settings are correct.
10 Insufficient memory.
- Description:
-
Insufficient memory.
- Measure:
-
Terminate any unnecessary applications.
11 Cannot open log file.
- Description:
-
Opening of the file failed.
- Measure 1:
-
Check available disk space.
- Measure 2:
-
Check the access permissions for the Job execution request result output file.
12 An error occurred on the server side.
- Description:
-
Abnormality occurred on the Observe process side.
- Measure:
-
Check the error code for the Observe process.
13 Failed to acquire the Date Format.
- Description:
-
Failed to acquire Date Format.
- Measure:
-
Check the setting of Date Format in the System Environment Settings.
14 Failed to acquire HULFT Operation Language.
- Description:
-
Failed to acquire HULFT Operation Language.
- Measure:
-
Check the setting of HULFT Operation Language in the System Environment Settings.
15 Failed to open the System Environment Settings file.
- Description:
-
Opening of the System Environment Settings file (hulenv.cnf) failed.
- Measure 1:
-
Check that the System Environment Settings file (hulenv.cnf) exists.
- Measure 2:
-
Check the access permissions for the System Environment Settings file (hulenv.cnf).
16 Communication version error.
- Description:
-
A communication version error occurred.
- Measure:
-
Check that the specified job ID is within 8 bytes.
17 Failed to communicate in the Forced Strong Key mode.
- Description:
-
Failed to communicate in the Forced Strong Key mode.
- Measure:
-
Check that all of the following conditions are met on the destination host:
-
Forced Strong Key mode is enabled
-
HULFT Ver.8.4.0 or higher is installed
-
HULFT8 Cipher Option(AES) is installed
-
99 Application error.
- Description:
-
An application error occurred.
- Measure:
-
Restart the HULFT service.
153 An error occurred during character code conversion.
- Description:
-
An error occurred during character code conversion.
- Measure:
-
Insufficient memory.
Terminate any unnecessary applications.
156 Failed to open the Command Message file of the command that you ran.
- Description:
-
Failed to open the Command Message file of the command that you ran.
- Measure 1:
-
Check that the file exists.
- Measure 2:
-
Check the access permissions for the file.
Other codes Application error. Status Code=%d
- Description:
-
An application error occurred.
- Measure:
-
Restart the HULFT service.