File Trigger Information Control command (utltriggerconf.exe)
1
- Description:
-
A parameter error occurred.
- Measure:
-
Check whether the entered parameter is correct.
4 Socket Error.
- Description:
-
Unable to connect to the socket.
- Measure 1:
-
Check whether the Observe process has been started.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
- Measure 3:
-
To acknowledge the request from the remote host, increase Connect Retry Count (retrycnt) in the System Environment Settings file (hulenv.cnf).
5 Unable to write to the socket.
- Description:
-
Unable to connect to the socket.
- Measure 1:
-
Check whether the Observe process has been started.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
- Measure 3:
-
To acknowledge the request from the remote host, increase Connect Retry Count (retrycnt) in the System Environment Settings file (hulenv.cnf).
6 Unable to read the socket.
- Description:
-
Unable to connect to the socket.
- Measure 1:
-
Check whether the Observe process has been started.
- Measure 2:
-
Set a large value for Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
- Measure 3:
-
To acknowledge the request from the remote host, increase Connect Retry Count (retrycnt) in the System Environment Settings file (hulenv.cnf).
7 Reading socket timed out.
- Description:
-
A communication error occurred (socket read time-out error). Or the re-read processing did not end within the specified time period.
- Measure 1:
-
Check whether the Observe process has been started.
- Measure 2:
-
Set a large value to Connect Retry Count (retrycnt) and Connect Retry Interval (retrytime).
8 Unable to connect.
- Description:
-
Failed to connect to the Observe process.
- Measure:
-
Check whether the Observe process has been started.
9 An error occurred on the server side.
- Description:
-
Abnormality occurred on the Observe process side.
- Measure:
-
Check the error code on the Observe process side.
10 Duplicated request.
- Description:
-
A file trigger information control request has already been issued, and the Observe process is processing the request.
11 A system error occurred.
- Description:
-
A system error occurred.
- Measure:
-
Restart the HULFT service.
12 Insufficient memory.
- Description:
-
Insufficient Memory.
- Measure:
-
Terminate any unnecessary applications.
13 Failed to acquire HULFT Operation Language.
- Description:
-
Opening of the System Environment Settings file (hulenv.cnf) failed.
- Measure 1:
-
Check that the System Environment Settings file (hulenv.cnf) exists.
- Measure 2:
-
Check the access permissions for the System Environment Settings file (hulenv.cnf).
14 This command is not available to the grade of product now in use.
- Description:
-
This command is not available to the grade of product now in use.
15 Failed to communicate in the Forced Strong Key mode.
- Description:
-
Failed to communicate in the Forced Strong Key mode.
- Measure:
-
Check that all of the following conditions are met on the destination host:
-
Forced Strong Key mode is enabled
-
HULFT Ver.8.4.0 or higher is installed
-
HULFT8 Cipher Option(AES) is installed
-
156 Failed to open the Command Message file of the command that you ran.
- Description:
-
Failed to open the Command Message file of the command that you ran.
- Measure 1:
-
Check that the file exists.
- Measure 2:
-
Check the access permissions for the file.