System Environment Settings list

The fields that you can set in the System Environment Settings are shown in the following table.

The default value and setting value for each field are taken from the values registered in the System Environment Settings file (hulenv.cnf). Therefore, the values shown below may be different from the default values and setting values displayed on the System Environment Settings screen. Refer to Explanation of each field for the setting values on the System Environment Settings screen.

Table 3.11 System Environment Settings List
Field Name		Tag Name	Default Value	Setting Value	Remarks
Startup
	Work File Generation Path	tmpdir	.	Characters	Within 200 bytes
	Service Port No.	srvport	31001	1–65535
	Command Acknowledge Port No.	sddport	32000	1–65535
	Receive Port No.	rcvport	30000	1–65535
	Observe Port No.	obsport	31000	1–65535
	Service Process Port No.	srvcprocport		1–65535 or no specification
	Scheduler Port No.	schport		1–65535 or no specification
	Send Process Multiplex Level	sndpsnum	10	1–999
	Receive Process Multiplex Level	rcvpsnum	999	1–999
	Automatic Process Startup	autostart	1111	0,1	(*1)
	Process Auto Reboot Max. Count	procrestartcnt	0	0–99
	Process Auto Reboot Retry Interval	procrestarttime	60	0–99
	Account Name	-		Characters	(*2)
	Domain Name	-		Half-width characters	Within 64 bytes (*2)
	Password	-		Half-width characters	(*2)
Code Conversion
	Code Set for Transfer	cs4trnsfr	Value set at installation	8,G,S
	Standard for Japanese	jistype	83	78,83
	Tab Code Mode	tabchange	0	0,1
	KEIS Em-size Space Mode	keisspmode	0	0,1
	Use Custom Character Table	gaijifile	0	0,1,2
	Handling of Unregistered Custom Characters	gaijierr	0	0,1
	Code Conversion Mode	codechangemode	0	0,1
	Pack Zone Conversion	pschg	0	0,1,B,F,9,S,N
	Sign for ASCII	psascii	1	1,2
	Sign for EBCDIC	psebcdic	1	1,2
	X Type Conversion	xmode	0	0,1
	Instant Transfer Code Converting Side	insttranscodcnv	R	S,R
Send and Receive
	Encryption Scheme	ciphertype	(*3)	0,1
	Receive Ready Notification	rcvcmd
	Send Unit Selection	sndpsend	1	0,1
	Transfer Group Check	tgrpchk	0	0,1,2
	Retry Count on Locked Send File	lockcnt	0	0–99999
	Retry Interval on Locked Send File	locktime	0	0–99999
	Retry Count on Locked Receive File	rretrycnt	0	0–99999
	Retry Interval on Locked Receive File	rretrytime	0	0–99999
	Retry Count on Send File	sretrycnt	10	0–99999
	Retry Interval on Send File	sretrytime	1	0–99999
	Dynamic Parameter Specification	dynparam	1	0,1
	Message Dynamic Parameter Specification	msgdynparam	3	0,1,2,3
	Receive Multiplex Level Over Retry	rcvover_rty	0	0,1
	Send Transfer Error Recovery	enderrmode	0	0,1	(*4)
	Criteria to Delete Resend Queue	resenddel	1	1,2
	Receive File Max. Size	rcvmaxfilesize	(*5)	1–(*5)	Bytes
	Clear Unsent File	delreqcpfile	0	0,1	(*6)
	Clear Resend Queue File	delresendfile	0	0,1	(*6)
	Receive File Lock Standby	rcvfilelockwait	1	0,1
	Local Host Name	myhostname			Within 68 bytes
Communication
	Connect Retry Count	retrycnt	10	0–99999
	Connect Retry Interval	retrytime	1	0–99999
	Auto Resend Retry Count	sockerr_autoretry	0	0–9
	Socket Read Timeout	socktime	3600	10–259200
	Socket Buffer Size for Data Sending	sndsocksize	0	0,4096–2147483647
	Socket Buffer Size for Data Receiving	rcvsocksize	0	0,4096–2147483647
	Service Connect Timeout	srvtime	3600	1–65535
	HULFT Manager Timeout	admsocktime	3600	10–259200
	IP Version	ipversion	4	4,4/6,6/4,6
	Queue Of Pending Connect	listen	50	1–512
	Framed Message Transfer Type	proctranstype	A	N,S,R,A
Security
	Management Screen Security	admcheck	0	0,1
	Password Check	password	0	0,1
	Allow Send/Resend Request from Unregistered Host	allowsndreq	Y	Y,N
	Allow Post-receive Job Result Inquiry from Unregistered Host	allowpostrjobrslt	Y	Y,N
	Allow Job Result Notification Request from Unregistered Host	allowjobrsltntfy	Y	Y,N
	Allow Remote Job Execution Request from Unregistered Host	allowrmtjobexe	Y	Y,N
	Allow Instant Transfer from Unregistered Host	allowinsttrans	N	Y,N
	Instant Transfer Receive Root Directory	insttransroot	"itr" directory sibling of HULPATH	Character string of 200 bytes or shorter
	Forced Strong Key Mode	strongkeymode	0	0,1
Global
	Date Format	datefmt	Value set at installation	1,2,3
	HULFT Operation Language	hullang	Value set at installation	JPN, ENG, ZHO
Transfer Test
	Transfer Preference	ttmode	0	0,1
	Result Handling of Receiving	ttrcvomit	0	0,1
	Output Receive File	ttrcvfiloutput	0	0,1
	Execute Pre-send Job	ttpresndjob	0	0,1
	Execute Post-send Job	ttsndjob	0	0,1
	Execute Post-receive Job	ttrcvjob	0	0,1
	Output Results to Transfer Logs	ttsndrcvlog	1	0,1
Logs
	Log Rotation Record Count	logdelcount	0	0–999999
	Console Log Size (KB)	logsize	999999	1024–102400	999999: unlimited
	Output to Event Logs	eventlog	0000	0,1	(*1)
	Output to Console Logs	consolelog	1111	0,1	(*1)
	Console Log Backup	backuplog	1	0,1
	Operation Log Output Option	oplselect	0	0,1,2,3
	Operation Log User-specified Character	oplcharacter		Alphanumeric characters	Within 8 bytes
	Operation Log User ID Output Format	opluseridtype	0	0,1
	Operation Log Auto Rotate Size	oplchangesize	0	0–9999	0: unlimited
	Operation Log Generations	oplgenerationcount	9999	2–9999
	Log Size Reduction Mode	logreduction	0	0,1
	Log Output Version	logver	84	8,84
Others
	Job Timeout	jobwtimeout	999999	10–259200	999999: unlimited
	HULFT-SAN V5 Product	san_ver5	H	F,H
	Transfer Status Transfer Count	disptranscnt	100	1–100
	Observe Log Output	-	1	0,1
	Status Display Selection	statusdisplay	1	0,1
	HULFT Script Port No.	hsport	(*8)	1–65535
Shared Settings by HULFT
	Path to Location for Cross-Product Sharing (hulsharepath)	hulsharepath		Characters	Within 200 bytes
	Local File Lock Mode	localfile_lockmode	0	0,1
Scheduler
	Weekly Non-working Days	weekoff	1,7	0,1,2,3,4,5,6,7
	Include Holidays in Non-working Days	holiday	0	0,1
	Scheduling Time	schtime	0	0–23
	Schedule Process Multiplex Level	schnum	50	1–999
	Designated Non-working days	-			(*2)
	Holidays	-	(*7)		(*2)
Mail Interface
	Mail Account Name	User		Alphanumeric characters	Within 30 bytes
	Mail Server Host Name	MailHost		Alphanumeric characters	Within 68 bytes
	SMTP Port No.	SmtpPort		1–65535
	Full Name	FullName		Alphanumeric characters	Within 30 bytes
	Domain Name	DomainName		Alphanumeric characters	Within 64 bytes
Cluster
	Management Information Duplication	adjoinadminfile	0	0,1	(*6)
	Processing Status Output and Event Log	alertmsgput	0	0,1	(*6)
	Processing Status Storage File Count	consolelogcnt	10000	100–1000000
	Sync Start with Service	startsync	0	0,1

*1	:	The value to be set is a combination of the setting values of the options for the field. Refer to Explanation of each field for details.
*2	:	Only the settings on the screen are available.
*3	:	The default value is '1' when your HULFT product configuration includes HULFT Cipher Options, and '0' when your HULFT product configuration does not include HULFT Cipher Options. However, if you added HULFT Cipher Option or changed the type of HULFT Cipher Options by updating the Product Key, the default value is not changed. Refer to Installation Manual for details.
*4	:	'1' is set for New Installation.
*5	:	9,223,372,036,854,775,808 (63rd power of two)
*6	:	The default value is '1' for HULFT8 Server grade.
*7	:	Refer to Scheduler Manual.
*8	:	HULFT Script Port No. (hsport) has no default value. If HULFT Script is installed or if HULFT Script is added by performing a Product Key Update, specify a port number for HULFT Script Port No. (hsport). Refer to Installation Manual for details.