Host Information
You can register the detailed information about host on the sending side or the host on the receiving side. There are two ways to register the information.
-
Registration using the HULFT Management Console
=> Refer to Using the Host Information
-
Registration by running commands with parameter files
=> Refer to Management Information Batch Registration command
(1) Field List
In the table below, the check marks in the Optional column indicate the fields considered optional during registration from the HULFT Management Console. Optional fields and mandatory fields for registration by running commands with parameter files may differ from those for registration using the HULFT Management Console.
For details on optional fields and mandatory fields for the registration by running commands with parameter files, refer to Management Information Batch Registration command.
Field Value |
Default Value |
Setting Value |
Optional |
Remarks |
||
---|---|---|---|---|---|---|
Screen |
File |
|||||
Host Name |
HOST |
|
Alphanumeric characters, particular symbols (*1) |
- |
Within 68 bytes |
|
Comment |
COMMENT |
|
Characters |
✓ |
Within 60 bytes |
|
Host Information Update Screen |
||||||
|
Host Type |
HOSTTYPE |
|
H, U, N, W, |
- |
|
Code Set for Transfer |
KCODETYPE |
|
S, E, 8, J, |
- |
|
|
Standard for Japanese |
JISYEAR |
1 |
0, 1 |
✓ |
|
|
Receive Port No. |
RCVPORT |
30000 |
1–65535 |
- |
|
|
Observe Port No. |
REQPORT |
31000 |
1–65535 |
- |
|
|
Connection Type |
CONNECTTYPE |
L |
L |
- |
|
|
Use HULFT7 Comm. Mode |
HUL7MODE |
N |
N, Y |
✓ |
|
|
Send Process Multiplex Level by Host |
HOSTSPSNUM |
0 |
0–9999 |
✓ |
|
|
Host Information Update Screen (Extension) |
||||||
|
Proxy Server Name |
MYPROXYNAME |
|
|
|
(*2) |
Proxy Port No. |
MYPROXYPORT |
|
|
|
(*2) |
|
Allow Send Request/Resend Request |
SENDPERMIT |
Y |
Y, N |
✓ |
|
|
Allow to View Post-receive Job Result |
HULJOBPERMIT |
Y |
Y, N |
✓ |
|
|
Allow to Notify Job Result |
HULSNDRCPERMIT |
Y |
Y, N |
✓ |
|
|
Allow to Execute Remote Job |
HULRJOBPERMIT |
Y |
Y, N |
✓ |
|
|
Allow Instant Transfer |
ALLOWINSTTRANS |
N |
Y, N |
✓ |
|
|
Notify User Details |
USRNOTIFY |
N |
Y, N |
✓ |
|
✓ |
: |
Optional |
- |
: |
Mandatory |
*1 |
: |
Only hyphens (-) and periods (.) can be specified. Note that, in HULFT-HUB, a host name with an underscore (_) may automatically be set. The host name with an underscore (_) is only used to manage HULFT by HULFT-HUB. You cannot use an underscore (_) in a host name for transfer. |
*2 |
: |
This field is set when HULFT-HUB or HULFT-WebConnect is used. Do not modify the setting of this field. |
(2) Explanation of each field
This section explains the fields to be specified in the Host Information. The parenthesized strings are the names of each field and you can use them as field tags in a parameter file when registering the information.
- Host Name (HOST)
-
Host name that identifies the host on the sending side or the host on the receiving side
At the time of sending, this host name is linked with the host name of the Transfer Group Information.
When receiving is carried out, this host name is linked with the local host name of the host on the sending side.
- Comment (COMMENT)
-
Comment for the host
Host Information Update Screen
- Host Type (HOSTTYPE)
-
Type of the operating system for the host that is specified for Host Name (HOST).
- H (HOST):
-
Mainframe
- U (UNIX):
-
UNIX/Linux/NonStop
- N (NT):
-
WindowsNT operating system
- W (WIN):
-
Windows9x operating system
- A (AS400):
-
IBM i
- K:
-
Fujitsu K series
- Code Set for Transfer (KCODETYPE)
-
Character code for the host that is specified for Host Name.
- S (SHIFT-JIS):
-
SHIFT-JIS
- E (EUC-JP):
-
EUC-JP
- 8 (UTF-8):
-
UTF-8
- J (JEF):
-
JEF
- I (IBM Kanji):
-
IBM Kanji
- K (KEIS):
-
KEIS
- N (NEC):
-
NEC
- G (GB18030):
-
GB18030
- C (IBM ZH-HANS):
-
IBM Simplified Chinese
- Standard for Japanese (JISYEAR)
-
JIS Year of the character code that is specified for Code Set for Transfer (KCODETYPE).
The setting is valid only for the Code-set Conversion for Japanese.
- 0 (78):
-
JIS78
- 1 (83):
-
JIS83
Omitting this field sets '1' (83).
- Receive Port No. (RCVPORT)
-
Port number used by the Receive daemon
- Observe Port No. (REQPORT)
-
Port number used by the Observe daemon
- Connection Type (CONNECTTYPE)
-
Connection type for the host that is specified for Host Name.
- L (LAN):
-
Specify this parameter when a LAN connection is used.
You can set only 'L' (LAN).
- Use HULFT7 Comm. Mode (HUL7MODE)
-
Communication method for the host that is specified for Host Name
- N (No):
-
HULFT first uses the connection method of HULFT8 to connect to the remote host. If the remote host uses a lower version, HULFT switches to the connection method of HULFT7.
- Y (Yes):
-
HULFT uses the connection method of HULFT7 from the beginning.
Omitting this field sets 'N (No).'
- Send Process Multiplex Level by Host (HOSTSPSNUM)
-
Send Multiplex Level for the host that is specified for Host Name
When you set '0' to this field, HULFT does not check the multiplex level of sending by host.
Omitting this field sets '0.'
Set a value for Send Process Multiplex Level by Host that is equal to or lower than the value that is set for Send Process Multiplex Level in the System Environment Settings.
Host Information Update Screen (Extension)
- Proxy Server (MYPROXYNAME)
- Proxy Port No. (MYPROXYPORT)
-
This field is set when HULFT-HUB or HULFT-WebConnect is used.
Do not modify the setting of this field.
- Allow Send Request/Resend Request (SENDPERMIT)
-
Specify whether to acknowledge the services of the Send Request (SEND) and the Resend Request (RESEND).
- Y:
-
Acknowledge the services
- N:
-
Refuse to acknowledge the services
Omitting this field sets 'Y' (Allow the service to be accepted).
- Allow to View Post-receive Job Result (HULJOBPERMIT)
-
Specify whether to acknowledge the service of the Post-receive Job Result Inquiry Request (HULJOB).
- Y:
-
Acknowledge the service
- N:
-
Refuse to acknowledge the service
Omitting this field sets 'Y' (Allow the service to be accepted).
- Allow to Notify Job Result (HULSNDRCPERMIT)
-
Specify whether to acknowledge the service of the Job Execution Result Notification (HULSNDRC).
- Y:
-
Acknowledge the service
- N:
-
Refuse to acknowledge the service
Omitting this field sets 'Y' (Allow the service to be accepted).
- Allow to Execute Remote Job (HULRJOBPERMIT)
-
Specify whether to acknowledge the service of the Remote Job Execution (HULRJOB).
- Y:
-
Acknowledge the service
- N:
-
Refuse to acknowledge the service
Omitting this field sets 'Y' (Allow the service to be accepted).
- Allow Instant Transfer (ALLOWINSTTRANS)
-
Specify whether to accept requests for instant transfer from the host specified for Host Name (HOST).
- Y:
-
Allow instant transfer
- N:
-
Refuse the requests for instant transfer
Specify whether to accept or reject requests for instant transfer on the receiving-side host.
If omitted, "N (Deny the request for instant transfer)" is set.
- Notify User Details (USRNOTIFY)
-
Specify whether to notify the user ID (operating system) and the user ID (Management Console) to the host at the connection destination.
- Y:
-
Notify
- N:
-
Do not notify
For details on the user ID, refer to Administration Manual.
Omitting this field sets 'N' (Do not notify).
(3) Points to be noted when setting
Host Name
Specify a valid host name, which is registered in the remote host. The entry of Host Name is case-sensitive.
Host Type
When the host type of the remote host is Windows and the code set that is used for the transfer is UTF-8 or GB18030, specify 'N' (NT) for Host Type (HOSTTYPE).