Send Management Information Registration

The procedure to register the Send Management Information is as follows:

1. On the System Configuration screen, enter the File ID 'LOOPTEST' to be registered in ID or Host Name, use the up arrow key and the down arrow key to move the cursor to '1. Send Management Information,' and then press the Enter key.

   The Send Management Information Update screen appears.

2. Enter the required information in each field.

   [Registration details]

   Field	Set Value
   File ID	LOOPTEST
   Send File Name	/usr/tmp/snddata
   Transfer Type	T (TEXT)
   Code Conversion	N (no conversion)
   Transfer Group ID	grp01
   Other fields	Default value

   For the details of each field, refer to Operation Manual.

                                                                                   
    <<Send Management Information Update>>      Ctr+p: Copy            ESC: Cancel
                                                Ctr+d: Delete          TAB: Select
                                                Ctr+s: Switch Screen
    File ID             : LOOPTEST
   
    Send File Name      : /usr/tmp/snddata
    Transfer Type       : T (F:FORMAT B:BINARY T:TEXT M:MULTI FORMAT)
    Multi/Format ID     :
    Compression Preference: N (N:None  1:Horizontal  2:Vertical  3:DEFLATE)
    Compression Unit    : 0
    DEFLATE Level       :   (S:Speed D:Default C:Compression Ratio)
    Code Conversion     : N (S:Sending Side  R:Receiving Side  N:No Conversion)
    EBCDIC Set          : 0 (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX G:NEC H:KX
                             I:CNX V:U1 W:U2 X:U3)
    Send File Mode      : K (K:Keep C:Clear D:Delete L:Lock)
    Transfer Group ID   : grp01
    Pre-send Job ID     :
    Successful Job ID   :
    Unsuccessful Job ID :
   
    Comment :  LOOPTEST
   
                                                                                   

   Screen 6.4 Send Management Information Update Screen

   Note

   Change the value for Send File Name to suit the environment of your system.

                                                                                   
    <<Send Management Information Update>>      Ctr+s: Switch Screen   ESC: Cancel
                                          Ctr+g: Generate Cipher Key   TAB: Select
   
    File ID             : LOOPTEST
   
    Interface DBID        :
   
    Transfer Interval     : 0           Transfer Priority    : 50
    Transfer Block Length : 0           Transfer Block Count : 0
   
    Shiftcode Mode        : Y (Y:Add N:None)
   
    Cipher Key : 
   
   
   
   
   
   
   
    Comment :  LOOPTEST
   
                                                                                   

   Screen 6.5 Send Management Information Update Screen (Extension)

3. When input is complete, press the Enter key.

   You return to the System Configuration screen and registration is completed.

   To cancel registration, press the ESC key.