Receive Management Information Registration

The procedure to register the Receive Management Information is as follows:

1. On the System Configuration screen enter the File ID 'LOOPTEST' to be registered in ID or Host Name, use the up arrow key and the down arrow key to move the cursor to '2. Receive Management Information,' and then press the Enter key.

   The Receive Management Information Update screen appears.

2. Enter the required information in each field.

   [Registration details]

   Field	Set Value
   File ID	LOOPTEST
   Receive File Name	/usr/tmp/rcvdata
   Registration Mode	R (replace)
   Error Handling	K (keep)
   Receive Mode	S (single receive)
   Generational Management	N (none)
   Transfer Group ID	grp01
   Other fields	Default value

   For the details of each field, refer to Operation Manual.

                                                                                   
    <<Receive Management Information Update>>       Ctr+p: Copy        ESC: Cancel
                                                    Ctr+d: Delete      TAB: Select
                                                    Ctr+s: Switch Screen
    File ID            : LOOPTEST
   
    File Name          : /usr/tmp/rcvdata
    Owner Name         :                   Group Name         :
    Permission         : Read    Write   Execute  0/1:Clear/Set Permission
           Owner           1       1       0
           Group           1       1       0
           Other           1       1       0
    Registration Mode  : R (N:New Creation   R:Replace   M:Append)
    Error Handling     : K (D:Delete   K:Keep   R:Restore)
    Receive Mode       : S (S:Single   M:Multiple)
    Generation Mgmt    : N (N:Disabled Y:Enabled)  No. of Generations :
    EBCDIC Set         : 0 (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX G:NEC H:KX
                            I:CNX V:U1 W:U2 X:U3)
    Successful Job ID  :
    Unsuccessful Job ID:
   
    Comment :  LOOPTEST
   
                                                                                   

   Screen 6.6 Receive Management Information Update Screen

   Note

   Change the value for Receive File Name to suit the environment of your system.

                                                                                   
    <<Receive Management Information Update>>             TAB: Select  ESC: Cancel
                                  Ctr+g: Generate Cipher Key  Ctr+s: Switch Screen
   
    File ID            : LOOPTEST
   
    Notification       : J (T:Receive Completion  J:Successful Job Completion)
   
    Transfer Group ID  :grp01
   
    Verify Data        : 0 (0:No  1:Yes)
    Cipher Key : 
   
   
   
   
   
   
   
   
   
    Comment :  LOOPTEST
   
                                                                                   

   Screen 6.7 Receive Management Information Update Screen (Extension)

3. When input is complete, press the Enter key.

   You return to the System Configuration screen and registration is completed.

   To cancel registration, press the ESC key.