Settings for each login

The Management Console Security file (huladm.info) is necessary for setting each permission.

Set the contents with respect to each login name to which the user permissions are set in the Management Console Security file. Further, if the login name is not set, (5) Value of default users is set. If the Management Console Security file does not exist or if (5) Value of default users is not set, (6) Default value of each field is set.

(1) File Name

The name of the Management Console Security file is 'huladm.info.' You cannot change this name. The Management Console Security file is placed in the path (HULPATH) in which the system file used by HULFT exists.

(2) Description Format

A line with '#' at the beginning is considered as a comment line. A blank line is also acceptable. The space code (0x20) or tab code (0x09) is used as the delimiter between fields.

(3) Record Layout

As the Management Console Security file (huladm.info) does not contain binary data, it can be created using an editor such as vi. Further, multiple descriptions can be set for a record in the Management Console Security file.

Table 3.14 Management Console Security File Record Layout

Field Name

Area Size

Permission Flag (Description Value)

Login Name

Max.14

14 alphanumeric characters

Basic Permissions

 

Log View Permission

1

0 or 1

Log Delete Permission

1

0 or 1

Permission to Access System Management Information

1

0 or 1

Issue Request Permission

1

0 or 1

Extended Permissions

 

Permission to View System Management Information

1

0 or 1

Permission to View and Update System Management Information

1

0 or 1

Permission to View and Delete System Management Information

1

0 or 1

Permission to View Directory via HULFT Manager

1

0 or 1
Note

Use the specified format in this file. (Follow the given sample format.) You may not be able to configure the permissions as you intended if your description does not follow the specification. HULFT behaves as follows:

  • The space code (0x20) or tab code (0x09) is used as the delimiter between fields. Therefore, when you describe the space code or the tab code for the permission flag to be set, HULFT enables the permission flag of successive fields.

  • HULFT enables 0 for this field (0 indicates no permission is granted) if you specify any of the following for the permission flag: 0, 1, or characters other than space code and tab code.

  • If the basic permissions are not fully described (that is, the number of specified permission flags is less than four), then HULFT applies the default value for the permissions provided to the login user. If the permission flag is not fully described (that is, the number of specified permission flags is four or greater yet less than eight), then HUFLT applies the default value only to the extended permissions.

    Refer to (6) Default value of each field for the default values of each field.

(4) Explanation of each field

The following provides an explanation of each field. Refer to (6) Default value of each field for the default values of each field.

Login Name

The login name for which security is set.

Log View Permission

Specify the log view permission on the HULFT Management Console

0:

Do not grant the Log View Permission

1:

Grant the Log View Permission

The Log View Permission of the screens listed below is specified by the above setting.

  • Send File List

  • Send Host List

  • Receive File List

  • Receive Host List

  • Request Status Confirmation

  • Transfer Status List

  • Resend Queue Status List

Note

When "0" (Do not grant the log view permission) is specified for Log View Permission, the user cannot perform the following operation in the log screens even if "1" (Grant permission to issue requests) is specified for Request Issue Permission.

  • Issuance of requests

  • Cancelation of transfers

  • Deletion of log records

  • Deletion of the Resend Queue information

Log Delete Permission

Specify the log delete permission on the HULFT Management Console.

0:

Grant the Log Delete Permission

1:

Do not grant the Log Delete Permission

The Log Delete Permission within the screens listed below is specified by the above setting.

  • Send Log List By File

  • Send Log List By Host

  • Receive Log List By File

  • Receive Log List By Host

  • Request Status Confirmation

Note

When "0" (Do not grant the log view permission) is specified for Log View Permission, the user cannot delete log records in the log screens even if "1" (Grant the log view permission) is specified for Log Delete Permission.

Permission to Access System Management Information

Specify whether to enable following permissions, namely Permission to View System Management Information, Permission to View and Update System Management Information, and Permission to View and Delete System Management Information. If you specify '0' for this field, HULFT treats the permissions stated below, namely, Permission to View System Management Information, Permission to View and Update System Management Information, and Permission to View and Delete System Management Information, as if no permission is granted, regardless of the setting of the each permission.

0:

Do not grant the Permission to Access System Management Information

1:

Grant the Permission to Access System Management Information

Issue Request Permission

Permission to issue requests from the HULFT Management Console is specified.

0:

Do not grant permission for issuance such as the Send File, the Send Request, and so on

1:

Grant permission for issuance such as the Send File, the Send Request, and so on

The Issue Request Permission of the screens listed below is specified by the above setting.

Send File:

  • Send File List

  • Send Management Information List

Send Request:

  • Receive File List

  • Receive Management Information List

Cancel Request:

  • Transfer Status List (Sending or Receiving)

Resend File and Resend Queue Deletion Request:

  • Resend Queue Status List

Note

When "0" (Do not grant the log view permission) is specified for Log View Permission, the user cannot perform the following operation in the log screens even if "1" (Grant permission to issue requests) is specified for Request Issue Permission.

  • Issuance of requests

  • Cancelation of transfers

  • Deletion of log records

  • Deletion of the Resend Queue information

Permission to View System Management Information

Specify the permission to view management information on the HULFT Management Console. This is permission to view the HULFT Management Console under '6. System Configuration' of the HULFT Main Menu. Regardless of the setting of this field, HULFT treats this field as if no permission is granted if you specify '0' for Permission to Access System Management Information mentioned above.

0:

Do not grant permission to view the system management information

1:

Grant permission to view the system management information

= Remarks =

When you specify "1" for one of the following permissions, you can view the system management information. Therefore, if you do not want to allow the user to view the system management information, you must specify "0" for all of the following permissions:

  • Permission to View System Management Information

  • Permission to View and Update System Management Information

  • Permission to View and Delete System Management Information

Permission to View and Update System Management Information

Specify the permission to view and update management information on the HULFT Management Console. This is permission to view and update the HULFT Management Console under '6. System Configuration' of the HULFT Main Menu. Regardless of the setting of this field, HULFT treats this field as if no permission is granted if you specify '0' for Permission to Access System Management Information mentioned above.

0:

Do not grant permission to view and update the system management information

1:

Grant permission to view and update the system management information

Permission to View and Delete System Management Information

Specify the permission to view and delete the records of system management information on the HULFT Management Console. This is permission to view and delete the records on the HULFT Management Console under '6. System Configuration' of the HULFT Main Menu. Regardless of the setting of this field, HULFT treats this field as if no permission is granted if you specify '0' for Permission to Access System Management Information mentioned above.

0:

Do not grant permission to view and delete the system management information

1:

Grant permission to view and delete the system management information

Permission to View Directory via HULFT Manager

Specify the permission to view directories via HULFT Manager. This is permission to view directories when you select files via the HULFT Manager Management Console.

0:

Do not grant permission to view directories

1:

Grant permission to view directories

(5) Value of default users

If multiple user names with the same settings exist, the default value of the user specification can be set by specifying 'DEFAULTU' in the user name. If the login name for which security is confirmed does not exist, this 'DEFAULTU' value is set.

(6) Default value of each field

The default value for each field is shown below.

If the applicable login name does not exist, or if the Management Console Security file (huladm.info) does not exist, HULFT applies the default values to each field as shown below. In addition, if the value for DEFAULTU does not exist, HULFT applies the following default values as well:

Table 3.15 Management Console Security Default Value

Field Name

Permission Flag (Default value)

Basic Permissions

 

Log View Permission

1

Log Delete Permission

1

Permission to Access System Management Information

1

Issue Request Permission

1

Extended Permissions

 

Permission to View System Management Information

1

Permission to View and Update System Management Information

1

Permission to View and Delete System Management Information

1

Permission to View Directory via HULFT Manager

1

(7) Setting Example

# HULFT8 Management Console Security file 
# 
# 0: Permission is not granted 
# 1: Permission is granted 
# Separate each field with Space or Tab. 
# 
# LN   : Login Name 
# LRP  : Log Reference Permission 
# LDP  : Log Deletion Permission 
# PASM : Permission to Access System Management(*) 
# IRP  : Issue Request Permission 
# PSM  : Permission to view System Management(*) 
# PUSM : Permission to view and Update System Management(*) 
# PDSM : Permission to view and Delete System Management(*) 
# PHM  : Permission to view directory via HULFT Manager 
# 
# * Permission to view System Management, Permission to view and update 
#   System Management, and Permission to view and delete System Management 
#   will become valid only when the Permission to access System Management 
#   is specified as '1.' 
# 
#LN      LRP  LDP  PASM IRP PSM PUSM PDSM PHM 
#|       |    |    |    |   |   |    |    |
#sample  1    1    1    1   1   1    1    1 
user1    1    0    1    0   1   0    0    1