Send Management Information (Mainframe)

(1) Field List

Table 5.11 List of Send Management Information Fields

Field Name	Default Value	Setting Value	Optional	Remarks
File ID		Alphanumeric characters	-	Within 8 bytes
Comment		Alphanumeric characters	✓	Within 60 bytes
Mainframe DSN		Alphanumeric characters	-	Within 44 bytes
Transfer Type	TEXT	(*1)	-
Format/Multi Format ID		Alphanumeric characters	✓	Within 8 bytes
Compression Level	None	(*1)	-
Code Conversion	Sending Side	(*1)	-
EBCDIC Code Set	Standard	(*1)	-
Send File Mode	Keep	(*1)	-
Volume Serial		Alphanumeric characters	✓	Within 6 bytes
Transfer Mode	Work File	(*1)	-
Work Volume Serial		Alphanumeric characters	✓	Within 6 bytes
Capacity	CYL	(*1)	-
1ST Extent	5	From 1 to 9999	✓
Secondary	3	From 0 to 9999	✓
UNIT Quantity	1	From 1 to 59	✓
Transfer Group ID		Alphanumeric characters	-	Within 8 bytes
Pre-send Job ID		Alphanumeric characters	✓	Within 8 bytes
Successful Job ID		Alphanumeric characters	✓	Within 8 bytes
Unsuccessful Job ID		Alphanumeric characters	✓	Within 8 bytes
Interface DBID		CSV, XML	✓	Within 8 bytes
Transfer Interval	0	From 0 to 32768	✓	Unit: 10 milliseconds
Transfer Priority	50	From 1 to 256	✓
Transfer Block Length	4096	(*2)	✓	Unit: bytes
Transfer Block Count	3	From 1 to 99	✓
Shiftcode Mode	Cut	(*1)	-
Subsequent Character	No Cut	(*1)	-
UNIT		Alphanumeric characters	✓	Within 8 bytes
Sequence Number		From 1 to 9999	✓
Sending with RDW	No	(*1)	-
Encryption Key		Alphanumeric characters	✓	8 to 20 bytes

✓	:	Optional
-	:	Mandatory

*1	:	On screen, select an option.
*2	:	Setting value ranges from '6' to '10000' for the destination host lower than HULFT Ver.7, and it ranges from '128' to '10000' for the connection destination of HULFT Ver.7 or higher.

(2) Explanation of Each Field

Each field to be set in Send Management Information is explained.

File ID

The ID to identify the file to send

Specify in alphanumeric character within 8 bytes.

Comment

This is the comment related to the Send file.

Mainframe DSN

Data Set Names (DSN) of Send file stored in mainframe.

Specify according to the naming conventions of Mainframe data set names.

Transfer Type

The data type of file to be sent:

FORMAT:

Format data

BINARY:

Binary data

TEXT:

Text data

MULTIFORMAT:

Multi Format data

Format/Multi Format ID

The ID where the Format or Multi Format of the Send file is registered

For details on the Format ID, refer to Format Information (Mainframe).

For details on the Multi Format ID, refer to Multi Format Information (Mainframe).

Format ID is mandatory when 'FORMAT' is specified for the Transfer Type. Multi Format ID is mandatory when 'MULTIFORMAT' is specified for the Transfer Type.

Compression Level

The compression level at the time of file transfer:

None

 

Horizontal:

Compression within records

Vertical:

Compression across records

Code Conversion

The code conversion destination of the files to be sent

Sending Side:

Sending host conversion

Receiving Side:

Receiving host conversion

No Conversion:

No conversion

EBCDIC Code Set

The EBCDIC code system that is used at the time of conversion from EBCDIC code to ASCII code:

• Kana

• Lower Case

• ASCII

• ASPEN

• Standard

• Standard Extension

• NEC Kana

• Kana Extension

• User Table 1

• User Table 2

• User Table 3

 

= Remarks =

You can specify 'Kana Extension' if HULFT at the connection destination is Ver.7.3.0 or higher.

Send File Mode

Exclusive access control while sending the file and the mode when it ends successfully:

Keep:

Saves the file after successful termination without locking when creating the Send work file or while sending

Clear:

Locks when creating the Send work file or while sending and makes it to a 0-byte file after successful end

Delete:

Locks while creating the Send work file or during sending and deletes the file after successful end

Lock:

Locks when the creating Send work file or during sending and saves the file after successful end

Volume Serial

The Volume Serial of the stored Send files.

Specify according to the naming conventions of Mainframe Volume Serial.

Transfer Mode

Transfer mode used for sending the Send file.

Direct:

Direct transfer of the Send file without creating work file

Work File:

Create work file from Send file and transfer

Work Volume Serial

Volume Serial of Send work file.

Specify according to the naming conventions of Mainframe Volume Serial.

Capacity

Space units of Send work file.

CYL:

Cylinder

TRK:

Track

OMIT:

Omitted (Auto Calculation)

1ST Extent

Primary request volume of Send work file.

Secondary

Incremental amount of Send work file.

UNIT Quantity

Multi volume unit count of Send work file.

Transfer Group ID

The ID where send destination of the Send file is registered.

For details on the Transfer Group ID, refer to Transfer Group Information (Mainframe).

Pre-send Job ID

The ID of the job to be started before sending

For details on the Job ID, refer to Job Information (Mainframe).

When omitted, the job is not started.

Successful Job ID

The ID of the job to be executed when sending file is completed successfully.

For details on the Job ID, refer to Job Information (Mainframe).

When omitted, the job is not started.

Unsuccessful Job ID

The ID of the job to be executed when sending file is completed unsuccessfully.

For details on the Job ID, refer to Job Information (Mainframe).

When omitted, the job is not started.

Interface DBID

This is the interface at the receiving side of the sent data:

CSV:

Converts the Receive file into CSV format on the receiving side

XML:

Converts the Receive file into XML format on the receiving side

When the Receive file received on the receiving side is in CSV format (UNIX, Linux, NonStop, and Windows) or in XML format (UNIX, Linux, and Windows), the above fixed characters are specified.

When the field is defaulted, the receiving in CSV format or XML format is not carried out. To establish interface, specify 'FORMAT' or 'MULTIFORMAT' for the Transfer Type.

Transfer Interval

The interval between two blocks in transfer.

Transfer Priority

Priority assignment specifying the order in which files will be transferred.

Smaller the value, higher the priority.

Transfer Block Length

The length of one block during transfer

The product of the Transfer Block Length and the Transfer Block Count cannot exceed 65520.

Transfer Block Count

This refers to the block count that is transferred at one time.

You cannot set the value of which product of multiplication of the Transfer Block Length and the Transfer Block Count exceeds 65520.

Shiftcode Mode

How to handle shift codes when carrying out code conversion

Cut:

Deletes shift codes and makes the data smaller

Space:

Converts from shift codes to space characters

Subsequent Character

Handling of trailing space and NULL (X'00') characters.

Null Cut:

Cuts the trailing null characters

Space Cut:

Cuts the trailing space characters

Both:

Cuts the trailing space and null characters

No Cut:

Does not cut the trailing space and null characters

UNIT

UNIT name where the send file is stored

Sequence Number

The sequence number on the tape volume in which Send file is stored.

Sending with RDW

This field specifies whether to add Record Descriptor Word (RDW) to transfer data or not

Yes:

Send with RDW

No:

Send without RDW (Default)

When you carry out sending with RDW, specify 'B:BINARY' for the Transfer Type.

Encryption Key

The key that encrypts the data.

You can apply security to the file to be sent. Enter the same Encryption Key as set in the Receive Management Information of the remote host.

When you default this field, the file is not encrypted.

(3) Points to be Noted When Setting