List of Host Information fields

You can register detailed information about the host on the sending side or the receiving side. For the registration method, refer to Using the Host Information.

(1) Field List

Table 4.58 List of Host Information Fields
Field Name			Default Value	Setting Value	Optional	Remarks
Screen		File	Default Value	Setting Value	Optional	Remarks
Host Name		HOST		Alphanumeric characters, particular symbols (*1)	-	Within 68 bytes
Comment		COMMENT		Characters	✓	Within 60 bytes (*2)
Basic Settings
	Host Type	HOSTTYPE	WindowsNT (N)	(*3)	-
	Code Set for Transfer	KCODETYPE	SHIFT-JIS (S)	(*3)	-	(*4)
	Kanji Code Type	KCODETYPE	SHIFT-JIS (S)	(*3)	-	(*5)
	Receive Port No.	RCVPORT	30000	1–65535	-
	Observe Port No.	REQPORT	31000	1–65535	-
	Standard for Japanese	JISYEAR	83JIS (1)	(*3)	-	(*4)
	JIS Year	JISYEAR	83JIS (1)	(*3)	-	(*5)
	Connection Type	CONNECTTYPE	LAN (L)	(*3)	✓
	Send Process Multiplex Level by Host	HOSTSPSNUM	0	0–999	✓
	Use HULFT7 Comm. Mode	HUL7MODE	No (N)	(*3)	✓
Proxy Server
	Proxy Server Name	MYPROXYNAME				(*6)
	Proxy Port No.	MYPROXYPORT				(*6)
Security
	Allow Send Request/Resend Request	SENDPERMIT	Yes (Y)	(*3)	✓
	Allow to View Post-receive Job Result	HULJOBPERMIT	Yes (Y)	(*3)	✓
	Allow to Notify Job Result	HULSNDRCPERMIT	Yes (Y)	(*3)	✓
	Allow to Execute Remote Job	HULRJOBPERMIT	Yes (Y)	(*3)	✓
	Allow Instant Transfer	ALLOWINSTTRANS	No (N)	(*3)	✓	(*7)
	Notify User Details	USRNOTIFY	No (N)	(*3)	✓

✓	:	Optional
-	:	Mandatory

*1	:	Hyphen (-), Period (.) When you use HULFT-HUB, HULFT-HUB may set a host name with an underscore (_). HULFT-HUB uses the host name with an underscore (_) to manage HULFT. You cannot use an underscore (_) in a host name for transfer.
*2	:	On the HULFT Manager Management Console, you can enter a string of up to 60 characters. When the destination host is HULFT Ver.8.1 or higher, the size of the string that you entered will be checked based on the code set that is set in HULFT at the connection destination. When HULFT checks and confirms that the size of the string meets the condition that is given in the remarks, the characters that you entered will be saved in HULFT.
*3	:	For the HULFT Manager Management Console, click a setting value on the pulldown list.
*4	:	This field is displayed when HULFT Manager connects to HULFT Ver.8.1 or higher.
*5	:	This field is displayed when HULFT Manager connects to HULFT lower than Ver.8.1.
*6	:	This field is set when HULFT-HUB or HULFT-WebConnect is used. Do not modify the setting of the field in HULFT Manager.
*7	:	This field is displayed when HULFT Manager connects to HULFT Ver.8.4 or higher.

(2) Explanation of each field

This section explains the fields to be specified in the Host Information. The parenthesized strings are the names of each field and you can use them as field tags in a parameter file when registering the information.

Host Name (HOST)

Host name to identify the host on the sending side or on the receiving side

At the time of sending, this host name is associated with the host name of the Transfer Group Information.

When receiving is carried out, this host name is associated with the local host name of the host on the sending side.

Comment (COMMENT)

Comment for the host

Basic Settings

Host Type (HOSTTYPE)

Type of operating system for the host specified for Host Name (HOST)

Mainframe (H):: Mainframe
UNIX (U):: UNIX/Linux/NonStop
WindowsNT (N):: WindowsNT operating system
AS/400 (A):: IBM i
Windows (W):: Windows9x operating system
K (K):: Fujitsu K series

Code Set for Transfer (KCODETYPE)

Character code for the host that is specified for Host Name

This field is displayed when HULFT Manager connects to HULFT Ver.8.1 or higher.

SHIFT-JIS (S)
JEF (J)
EUC-JP (E)
IBM Kanji (I)
KEIS (K)
NEC (N)
UTF-8 (8)
GB18030 (G)
IBM Simplified Chinese (C)

Kanji Code Type (KCODETYPE)

Character code for the host that is specified for Host Name

This field is displayed when HULFT Manager connects to HULFT lower than Ver.8.1.

SHIFT-JIS (S)
JEF (J)
EUC (E)
IBM (I)
KEIS (K)
NEC (N)
UTF-8 (8)

Receive Port No. (RCVPORT)

Port number used by the Receive process

Observe Port No. (REQPORT)

Port number used by the Observe process

Standard for Japanese (JISYEAR)

JIS Year of the character code that is specified for Code Set for Transfer (KCODETYPE)

This field is displayed when HULFT Manager connects to HULFT Ver.8.1 or higher.

The setting is valid only for the Code-set Conversion for Japanese.

78JIS (0)
83JIS (1)

Omitting this field sets '83JIS (1).'

JIS Year (JISYEAR)

JIS Year of the character code that is specified for Kanji Code Type

This field is displayed when HULFT Manager connects to HULFT lower than Ver.8.1.

78JIS (0)
83JIS (1)

Omitting this field sets '83JIS (1).'

Connection Type (CONNECTTYPE)

Connection type for the host that is specified for Host Name

LAN (L):: Specify when using a LAN connection.

You can set only 'LAN (L).'

Omitting this field sets 'LAN (L).'

Send Process Multiplex Level by Host (HOSTSPSNUM)

Send Process Multiplex Level for the host that is specified for Host Name

When you specify '0' in this tag, HULFT does not check Send Process Multiplex Level by host.

Omitting this field sets '0.'

Set the value that is equal to or lower than the setting value of Send Multiplex Level in the System Environment Settings.

Use HULFT7 Comm. Mode (HUL7MODE)

Communication method for the host that is specified for Host Name.

No (N):: HULFT first uses the communication method for HULFT8 to connect to the remote host. If the remote host uses a lower version, HULFT switches to the communication method for HULFT7.
Yes (Y):: HULFT uses the communication method for HULFT7 from the beginning.

Omitting this field sets 'No (N).'

Proxy Server

Proxy Server Name (MYPROXYNAME)

Proxy Port No. (MYPROXYPORT)

This field is set when HULFT-HUB or HULFT-WebConnect is used.

In HULFT Manager, do not modify the settings of the fields that are displayed for Proxy Server.

Security

Allow Send Request/Resend Request (SENDPERMIT)

Specify whether to accept the services of the Send Request (SEND) and the Resend Request (RESEND).

Yes (Y):: Accept the services
No (N):: Refuse to accept the services

Omitting this field sets 'Yes (Y).'

Allow to View Post-receive Job Result (HULJOBPERMIT)

Specify whether to accept the service of the Post-receive Job Result Inquiry Request (HULJOB).

Yes (Y):: Accept the service
No (N):: Refuse to accept the service

Omitting this field sets 'Yes (Y).'

Allow to Notify Job Result (HULSNDRCPERMIT)

Specify whether to accept the service of the Job Execution Result Notification (HULSNDRC).

Yes (Y):: Accept the service
No (N):: Refuse to accept the service

Omitting this field sets 'Yes (Y).'

Allow to Execute Remote Job (HULRJOBPERMIT)

Specify whether to acknowledge the service of the Remote Job Execution (HULRJOB).

Yes (Y):: Accept the service
No (N):: Refuse to accept the service

Omitting this field sets 'Yes (Y).'

Allow Instant Transfer (ALLOWINSTTRANS)

Specify whether to accept requests for instant transfer from the host specified for Host Name (HOST).

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes (Y):: Accept the requests for instant transfer
No (N):: Refuse the requests for instant transfer

Omitting this field sets 'No (N).'

Notify User Details (USRNOTIFY)

Specify whether to notify the user ID (operating system) and the user ID (Management Console) to the host at the connection destination.

Yes (Y):: Send notification
No (N):: Do not send notification

For details on user IDs, refer to Windows Administration Manual.

Omitting this field sets 'No (N).'

(3) Points to be noted when configuring settings

Host Name

Specify a valid host name, which is registered in the remote host. The entry of Host Name is case-sensitive.

Host Type

When the host type of the transfer destination host is Windows and the code set that is used for the transfer is UTF-8 or GB18030, specify 'WindowsNT (N)' for Host Type (HOSTTYPE).