Send Detail Information screen

On this screen, you can check details of the Send log.

File ID

The File ID registered in the Send Management Information is displayed.

= Remarks =

In the log records for instant transfer, "_INSTANT_TRANSFER_" is displayed as the file ID.

Receive Host

The name of the receiving host is displayed.

File Name

The name of the Send file is displayed.

Send Acknowledge Date

The Time and Date when Send File is acknowledged is displayed.

= Remarks =

The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.

For details on the date format, refer to System Environment Settings screen (Others tab).

Send Acknowledge Date (UTC+hh:mm)

The time and date on which the Send File is acknowledged is displayed in the local time of the machine on which you use HULFT Manager.

The offset value shown in 'hh:mm' is aligned with the time zone of the local time.

= Remarks =

When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to Send Acknowledge Date (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.
The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.

For details on the date format, refer to System Environment Settings screen (Others tab).

Send Date

The date on which sending starts is displayed.

The date is expressed in the format of 'Start time of sending - End time of sending.'

= Remarks =

The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.

For details on the date format, refer to System Environment Settings screen (Others tab).

Send Date (UTC+hh:mm)

The date on which sending starts is displayed in the local time of the machine on which you use HULFT Manager.

The date is expressed in the format of 'Start time of sending - End time of sending.'

The offset value shown in 'hh:mm' is aligned with the time zone of the local time.

= Remarks =

When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to Send Date (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.
The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.

For details on the date format, refer to System Environment Settings screen (Others tab).

Status Code

The status code of sending is displayed.

The code is expressed in the format of 'status code-detail code.'

For more information on the status code and the detail code, refer to Error Codes and Messages on the destination host.

Interface DBID

The Interface DBID registered in the Send Management Information is displayed.

IP Version (ipversion)

The IP version that is transmitted is displayed.

IPv4:: Connected at IPv4
IPv6:: Connected at IPv6

Record Count

The number of records of the sent file is displayed.

Data Size

The data size of the sent file is displayed. The unit is byte.

Transmission Rate

The transfer data length per second is displayed. The unit is byte.

Compression Ratio

The compression ratio at the time of carrying out compression is displayed. The unit is percentage.

Transfer Block Length

The length of one transfer block of the Send file is displayed. The unit is byte.

Transfer Block Count

The number of blocks of the Send file per transfer is displayed.

Identifier

The identifier that links the Send Log and the Operation Log is displayed.

Encryption Used

The type of encryption that is used for sending is displayed.

-:: Transfer does not use ciphers
AES:: HULFT Cipher Option (AES)
C4S:: HULFT Cipher Option (C4S)
HULFT:: HULFT Encryption Scheme
OTHER:: Encryption scheme other than the above

Transfer ID

The unique identifier that is issued for the file transfer is displayed.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Compression Preference

The compression preference that is used for the transfer is displayed.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

None:: Transfer data without using compression
Horizontal:: Transfer data using horizontal compression (compression within records)
Vertical:: Transfer data using vertical compression (compression across records)
DEFLATE:: Transfer data using DEFLATE compression

When a log file for a lower version is converted, "---" is displayed.

Connection Type

The mode of connection to the receiving host is displayed.

LAN:: LAN Connection

Note

This field is not displayed when the destination host is HULFT8 for IBMi.

Volume Serial

The volume serial number for the Send file is displayed. This field is displayed when the destination host is HULFT8 for Mainframe.

UNIT

The name of the unit that stores the Send file is displayed. This field is displayed when the destination host is HULFT8 for Mainframe.

Job No.

The job number is displayed. This field is displayed when the destination host is HULFT8 for IBMi.

Code Converted By

The host on which the code conversion is executed is displayed.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Sending Side:: Execute the code conversion on the sending-side host
Receiving Side:: Execute the code conversion on the receiving-side host
No Conversion:: Execute a transfer without code conversion or a binary transfer

When a log file for a lower version is converted, "---" is displayed.

Comment

The comment that is registered in the Send Management Information for the transfer is displayed.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Job

Message

HULFT Script

Case where Post-send Job is executed

The job execution log is displayed in Sending Side Job Status.

For details, refer to Case where Post-send Job is executed.
Case where message is used

The contents are displayed in Message. For details, refer to Case where message is used.
Case where HULFT Script is executed

The execution result of HULFT Script is displayed in HULFT Script. For details, refer to Case where HULFT Script is executed.

Description

The description of the error is displayed.

Measure

The measure for the error is displayed.

= Remarks =

If there is differential between Send Acknowledge Date and Send Date, following causes are suspected:
- Send File is issued more than specified in Send Process Multiplex Level (sndpsnum) or Send Process Multiplex Level by Host, which leads HULFT to send-waiting status.
- Auto Resend is executed several times.
You can view the requested date of the transfer of which transfer status is Standby or Transferring on the Transfer Status List screen.

For details on the Transfer Status List screen, refer to Transfer Status List screen.

Case where Post-send Job is executed

When the Post-send Job is executed, the job execution log is displayed in Sending Side Job Status.

Job Execution Date

The date on which the job that was last executed is displayed.

= Remarks =

The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.

For details on the date format, refer to System Environment Settings screen (Others tab).

Job Name

The job name that is activated after completion of Send processing is displayed.

Start Time

The time when the job starts is displayed.

End Time

The time when the job ends is displayed.

Start Time (UTC+hh:mm)

The time when the job starts is displayed in the local time of the machine on which you use HULFT Manager.

The offset value shown in 'hh:mm' is aligned with the time zone of the local time.

= Remarks =

When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to Start Time (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.

End Time (UTC+hh:mm)

The time when the job ends is displayed in the local time of the machine on which you use HULFT Manager.

The offset value shown in 'hh:mm' is aligned with the time zone of the local time.

= Remarks =

When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to End Time (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.

Message ID

The message ID when the job is completed is displayed. This field is displayed when the destination host is HULFT8 for IBMi.

Severity

The severity of the message when the job is completed is displayed. This field is displayed when the destination host is HULFT8 for IBMi.

Status

The completion status of the job is displayed.

0:: Successful completion of the job
Other than 0:: Abnormal termination (exit status of the startup job)

Note

Regarding the Sending Side Job Status, if the Status Code is '0,' successful job execution is displayed and, if the Status Code is other than '0,' unsuccessful job execution information is displayed.
The Pre-send Job is not displayed in Sending Side Job Status.

= Remarks =

End Time of Sending Side Job Status is '9' in the following cases:

When the sending side job is not executed as, there is no entry of the Job ID in the Job Information or due to the definition error of the Job Information.
When job ends unsuccessfully.

Case where message is used

When the message is used, the contents are displayed in Message. When no value is specified, it is displayed as blank.

Message 0 to Message 5: Messages that were specified when the Send File was issued or that were received when the Send Request was acknowledged are displayed.
Long Message 0 to Long Message 1: Long messages that were specified when the Send File was issued or that were received when the Send Request was acknowledged are displayed.

Case where HULFT Script is executed

When HULFT Script is executed, the script execution result is displayed in HULFT Script.

For details, refer to HULFT Script Manual for the destination host.

Note that this field is not displayed if HULFT Script is not installed.