List of Transfer Group Information fields
You can group transfer destinations (remote hosts) and register those groups.
The number of host names that can be specified per transfer group is 48.
For the registration method, refer to Using the Transfer Group Information.
(1) Field List
|
Field Name |
Default Value |
Setting Value |
Optional |
Remarks |
|---|---|---|---|---|
|
Transfer Group ID |
|
Alphanumeric characters |
- |
Within 50 bytes starting with an alphabetic character |
|
Comment |
|
Characters |
✓ |
Within 60 bytes (*1) |
|
Host Name |
|
Alphanumeric characters, |
- |
Within 68 bytes starting with an alphabetic character |
|
✓ |
: |
Optional |
|
- |
: |
Mandatory |
|
*1 |
: |
On the HULFT Manager Management Console, you can enter a string of up to 60 characters. When the destination host is HULFT Ver.8.1 or higher, the size of the string that you entered will be checked based on the code set that is set in HULFT at the connection destination. When HULFT checks and confirms that the size of the string meets the condition that is given in the remarks, the characters that you entered will be saved in HULFT. |
|
*2 |
: |
Only hyphens (-) and periods (.) can be set. |
(2) Explanation of each field
This section explains the fields to be specified in the Transfer Group Information.
- Transfer Group ID
-
ID that identifies the group of registered hosts
This transfer group ID is associated with Transfer Group ID in the Send Management Information and the Receive Management Information.
- Comment
-
Comment for the transfer group
- Host Name
-
Name of the remote host for sending or receiving
(3) Points to be noted when configuring settings
Host Name
The same host name cannot be registered more than once in one transfer group.
Comment
Even if full-width characters that are registered in Comment can be displayed on the HULFT Manager Management Console, the characters may not be displayed correctly on the HULFT Management Console for HULFT8 for IBMi.