Security

Management Console Security (admcheck)

This field specifies whether or not to use the Management Screen Security function.

Disabled:

Disable the Management Screen Security function

Enabled:

Enable the Management Screen Security function

Observe Host Check (obshstchk)

In the acknowledgment of a service request, this field specifies the operation by HULFT where the host that issued the request is not registered in the Host Information. The target services of this field are as follows: Send Request (SEND), Resend Request (RESEND), Post-receive Job Result Inquiry Request (HULJOB), Job Execution Result Notification (HULSNDRC), and Remote Job Execution (HULRJOB)

This field is displayed when the destination host is HULFT lower than Ver.8.4.

No:

Continue the Observe processing

Yes:

Refuse the connection from the host that issued the request, and handle the case as an error

Password Check (passwdcheck)

This field specifies whether to check the user and the password when HULFT Manager tries to connect to the application.

Yes:

Check the password.

No:

Do not check the password.

Note

When you change the setting from 'No' to 'Yes' and save it, users are prompted to enter the user ID and password the next time they attempt to connect to HULFT on the destination host from HULFT Manager, even if the HULFT is not restarted after the change.

Note that you need to register necessary users on HULFT installed on the destination host before you change the setting to 'Yes' and save it. Otherwise, the users cannot connect to HULFT on the destination host.

Operation Log Output Option (oplselect)

This field specifies whether to output the Operation Log.

Do Not Output:

Do not output the Operation Log

File Access Log:

Output only the File Access Log

Command Execution Log:

Output only the Command Execution Log

Output Both:

Output both the File Access Log and the Command Execution Log

Operation Log Rotation Size (oplchangesize)

This field specifies the maximum size of the Operation Log file in the unit of MB.

If the size of the Operation Log file exceeds this value, the file output till then is renamed to be backed up. The backup file is created in the same output directory as the Operation Log file.

If you specify '0' for this field, HULFT does not rotate the Operation Log automatically.

Refer to UNIX/Linux Administration Manual for details.

Operation Log Generations (oplgenerationcount)

Specify how many generations of backup files of the Operation Log file should be kept when the Operation Log file is rotated. When the number of backup files exceeds this value through automatic or manual rotation, the Operation Log file is overwritten sequentially from the oldest file.

Specifying a value other than '0' in Operation Log Rotation Size (oplchangesize) enables this field.

Defaulting this field sets '9999' for the value.

Refer to UNIX/Linux Administration Manual for details.

Forced Strong Key Mode (strongkeymode)

Specifies whether Forced Strong Key Mode is on or off.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

0:

Disabled

1:

Enabled

For details on Forced Strong Key mode, refer to Administration Manual.

This field can be viewed but not modified on the HULFT Manager Management Console. To modify the settings, edit the System Environment Settings file.

Allow Send/Resend Request from Unregistered Host (allowsndreq)

This field specifies whether to accept the service requests of the Send Request (SEND) and the Resend Request (RESEND) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service requests

No:

Refuse to accept the service requests

Allow Post-receive Job Result Inquiry from Unregistered Host (allowpostrjobrslt)

This field specifies whether to accept the service requests of the Post-Receive Job Result Inquiry request (HULJOB) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service requests

No:

Refuse to accept the service requests

Allow Job Result Notification Request from Unregistered Host (allowjobrsltntfy)

This field specifies whether to accept the service requests of the Job Execution Result Notification (HULSNDRC) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service requests

No:

Refuse to accept the service requests

Allow Remote Job Execution Request from Unregistered Host (allowrmtjobexe)

This field specifies whether to accept the service requests of the Remote Job Execution (HULRJOB) from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the service requests

No:

Refuse to accept the service requests

Allow Instant Transfer from Unregistered Host (allowinsttrans)

This field specifies whether to accept the requests for instant transfer from hosts that are not registered in the Host Information.

This field is displayed when the destination host is HULFT Ver.8.4 or higher.

Yes:

Accept the requests for instant transfer

No:

Refuse the requests for instant transfer

Instant Transfer Receive Root Directory (insttransroot)

Specify the root directory under which receive files are stored in instant transfer.

When the save destination for the receive file is specified on the sending-side host, this directory or a subdirectory of this directory must be specified. If an other directory is specified, a transfer error occurs.

If a save destination for the receive file is omitted on the sending-side host, the receive file is stored in the directory specified in this field.