Creating a new record

The procedure for creating a new record in the Transfer Group Information is as follows:

 

  1. On the System Configuration screen, select 5. Transfer Group Information.

    Enter a new ID that you want to register in input-allowed field for the ID, then press the Enter key.

    The Transfer Group Information Registration screen appears.

  2. Enter a value for each field as needed.

  3. When you finish the value entry, press the Enter key.

    HULFT registers a new record with a new ID, and returns to the System Configuration screen.

Note

To cancel the registration of a record in the Transfer Group Information while you are working with the screen, press F3 and return to the System Configuration screen.

To cancel creating a new record in the Transfer Group Information and return to the previous screen, press F12 while you are operating the screen.

= Remarks =

You can also create a new record by copying an existing record in the Transfer Group Information.

For details, refer to Copying a record.

For details on the screen, refer to Screens for configuring the Transfer Group Information.

For details of each field, refer to Transfer Group Information.