Creating a new record

The procedure for creating a new record in the Send Management Information is as follows:

 

  1. On the System Configuration screen, select 1. Send Management Information.

    Enter a new ID that you want to register in input-allowed field for the ID, then press the Enter key.

    The Send Management Information Registration screen appears.

  2. Enter a value for each field as needed.

  3. When you finish the value entry, press the Enter key.

    HULFT registers a new record with a new ID, and returns to the System Configuration screen.

Note

To cancel the registration of a record in the Send Management Information while you are working with the screen, press F3 and return to the System Configuration screen.

To cancel creating a new record in the Send Management Information and return to the previous screen, press F12 while you are operating the screen.

= Remarks =

You can also create a new record by copying an existing record in the Send Management Information.

For details, refer to Copying a record.

The Send Management Information Registration screen is composed of two subscreens. Pressing F11 or F23 toggles among the screens.

For details on the screen, refer to Screens for configuring the Send Management Information .

For details of each field, refer to Send Management Information.