Modifying a record

The procedures for modifying an existing record in the Host Information are as follows:

 

Procedure when directly specifying Host Name on System Configuration screen

  1. On the System Configuration screen, select 4. Host Information.

    Enter a host name of the record that you want to modify in input-allowed field for the ID, then press the Enter key.

    The Host Information Update screen displays the values that have already been registered.

  2. Modify the values of the record in the Host Information.

  3. When you finish the value entry, press the Enter key.

    HULFT updates the record with the values that you entered, and returns to the System Configuration screen.

Note

To cancel the update of a record in the Host Information while you are working with the screen, press F3 and return to the System Configuration screen.

To cancel modifying a record in the Host Information and return to the previous screen, press F12 while you are operating the screen.

The Host Information Update screen is composed of two subscreens. Pressing F11 or F23 toggles among the screens.

 

Procedure when specifying Host Name on Host Information List screen

  1. On the System Configuration screen, select 4. Host Information.

    Press the Enter key without entering anything in the input-allowed field of the ID.

    The Host Information List screen appears.

  2. Enter "1" in input-allowed field of the Host Name that you want to modify, then press the Enter key.

    The Host Information Update screen displays the values that have already been registered.

  3. Modify the values of the record in the Host Information.

  4. When you finish the value entry, press the Enter key.

    HULFT updates the record with the values that you entered, and returns to the Host Information List screen.

Note

To cancel the update of a record in the Host Information while you are working with the screen, press F3 and return to the System Configuration screen.

To cancel modifying a record in the Host Information and return to the previous screen, press F12 while you are operating the screen.

The Host Information List screen is composed of two subscreens. Pressing F11 or F23 toggles among the screens.

The Host Information Update screen is composed of two subscreens. Pressing F11 or F23 toggles among the screens.

For details on the screen, refer to Screens for configuring the Host Information.