Send Detail Information Inquiry screen and Receive Detail Information Inquiry screen

= Remarks =

The following explanation uses the Send Detail Information Inquiry screen as an example.

The screen configuration is the same as the Receive Detail Information Inquiry screen. You can apply the following explanation to above-mentioned screen by replacing "send" with "receive".

                                                        F11/F23= Switch Screen  
                      <<Send Detail Information Inquiry>>                  1/2  
                                                                                
  File ID       : FILE00018NEWYORK8TO8TOKYO                                     
  Receive Host  : AS400                                                         
                                                                                
   Send Acknowledge Date   : 12 / 29 / 2017    20 : 03 : 39                     
   Send Date               : 12 / 29 / 2017    20 : 03 : 39 - 20 : 03 : 39      
   Status Code             : 0000 - 0000       Job Number           : 935249    
   Record Count            :                  5                                 
   Data Size               :                640   bytes                         
   File Name               : HULDLIB/HUL002(SNDDATA)                            
   Transmission Rate       :       640  bytes/sec.                              
   Transfer Block Length   : 65520  bytes      Transfer Block Count :  1        
   Compression Preference  : XXXXXXXXXXXXXX    Compression Ratio    : --- %     
   Code Conversion Side    : XXXXXXXX                                           
   IP Version              : V4                Interface DBID       :           
   Encryption Used         : -                                                  
   Identifier              : 420972CA28DA47AE000E45430000008521                 
   Transfer Identifier     :                                                    
             420972CA28DA47AE000E45430000008521000100000000000000000000000000   
   Comment                 :                                                    
                                                                                
                                                                                

Screen 4.14 Send Detail Information Inquiry screen

For details on how to display the screen, refer to Inquiring detailed information on sending-side transferring.

Send Detail Information

<Explanation of Each Field>

File ID

The file ID used in sending to the host that you chose on one of the following screens:

  • Send Host List screen

  • HULFT Main Menu screen

Receive Host

Name of a host on the receiving side.

Send Acknowledge Date

Time and Date when the Send File was acknowledged.

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Send Date

Time and Date when the sending is carried out.

Status Code

Status code of sending

The Code is expressed in the format of "Status Code - Detail Code".

Refer to Error Codes and Messages for more information on the Status Code and the Detail Code.

Job No.

Job Number of the Send Job on IBM i

Record Count :

Record count of the Send file

Data Size :

Data size of the Send file

File Name

Name of the Send file

Transmission Rate

Data length transferred per second (bytes)

Transfer Block Length

Data length per block in the Send file

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Transfer Block Count

The number of blocks per transfer

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Compression Preference

Compression preference that is used for the file transfer

None :

Transferred without compression

Horizontal :

Transferred with horizontal compression (compression within records)

Vertical :

Transferred with vertical compression (compression across records)

DEFLATE :

Transferred with DEFLATE compression

When you convert and view the log for file transfers performed on HULFT of a version lower than Ver. 8, this field is set to "---".

Compression Ratio

Compression ratio if compression was executed

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Code Converted By

Host on which the code conversion was performed.

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Sending Side :

Performs the code conversion on the sending-side host

Receiving Side :

Performs the code conversion on the receiving-side host

No Conversion :

Performs the file transfer without conversion or as a binary transfer

When you convert and view the log for file transfers performed on HULFT of a version lower than Ver.8.4, this field is set to "---".

IP Version

IP version used for communication

V4 :

IPv4 (Value fixed in HULFT for IBMi)

Interface DBID

The Database ID that is interfaced

This field is shown only in the Send Detail Information Inquiry screen. This field is not shown in the Receive Detail Information Inquiry screen.

Encryption Used

Encryption scheme that is used in the transfer

- :

Encryption scheme is not used.

AES :

AES is used for the transfer.

C4S :

C4S is used for the transfer.

HULFT :

HULFT Encryption Scheme is used for the transfer.

OTHER :

Another encryption scheme is used for the transfer.

Identifier

The identifier marked per transaction

The identifier is information output to the operation log. The identifier is also output to the Log. As a result, you can link operation log records with the Log.

Transfer ID

Unique identifier issued for each file transfer

Comment

Comment text that is registered in the Send Management Information at the time of the transferring.

= Remarks =

If Send Acknowledge Date and Send Date differ, the following causes are suspected:

  • The target record may have been placed on the Send Queue because the number of requests on send files exceeded Send Job Multiplex Level (SNDPSNUM) or Send Process Multiplex Level by Host (HOSTSPSNUM) specified in the System Environment Settings.

  • Auto Resend has been executed several times.

You can view Send Acknowledge Date for the transferring instance which remains to be "unsent" or is in the middle of transferring on the Transfer Status List screen.

Job Status

For details, refer to Job status information for the sending side and the receiving side.