Transfer group information registration

The procedure to register the Transfer Group Information from the System Configuration screen is as follows.

1. Enter '5' for the OPTION field, enter 'GRP01' for the ID field, and then press the Enter key.

2. The Transfer Group Information Registration screen is displayed.

3. Enter a corresponding value in required fields as below:

[Value to Be Registered]

Field

Value

Transfer Group ID

GRP01

Host Name

AS400 (Remote destination host name registered in Host Information)

For details of each field, refer to the explanation on HULFT Settings in Operation Manual. 

                                                                                
                  <<Transfer Group Information Registration>>                    
                                                                                
                                                                                
  Transfer Group ID :  GRP01                                                    
  Comment   :                                                                   
  Host Name :                                                                   
                                                                                
   -> AS400                                                                     
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
   ->                                                                           
                                                                        More... 

Screen 4.2 Transfer group information registration

 

When the entry is complete, press the Enter key. The screen returns to the System Configuration screen to complete the registration. To stop the registration, press the F3 key.