Send Management Information registration

The procedure to register the Send Management Information from the System Configuration screen is as follows.

1. Enter '1' for the OPTION field, enter 'LOOPTEST' for the ID field, and then press the Enter key.

2. The Send Management Information Registration screen is displayed.

3. Enter a corresponding value in required fields as below:

[Value to Be Registered]

Field	Value
File ID	LOOPTEST
Send File Name	Work library name/LOOPSND(LOOPSND)(*1)
Transfer Type	T (TEXT)
Transfer Group ID	GRP01
Other fields	Default value

For details on creating the file, refer to Creation of send files.

For details of each field, refer to the explanation on HULFT Settings in Operation Manual.

                                                                                
                                                          F11/F23= Switch Screen
                <<Send Management Information Registration>>                  1/2 
                                                                                
 File ID               :  LOOPTEST                                              
                                                                                
 Send File Name        : HULTEMP/LOOPSND(LOOPSND)                               
                                                                                
 Transfer Type         : T  (F:FORMAT B:BINARY T:TEXT M:MULTI-FMT)              
 Multi/Format ID       :                                                        
 Compression Preference: N  (N:None 1:Horizontal 2:Vertical                     
                             3:DEFLATE)                                         
 DEFLATE Level         :    (S:Speed D:Default C:Compression Ratio)             
 Code Conversion       : S  (S:Sending Side R:Receiving Side N:No Conversion)   
 EBCDIC Set            : 0  (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX :G:NEC H:KX   
                             I:CNX V:U1 W:U2 X:U3)                              
 Send File Mode        : K  (K:Keep C:Clear D:Delete L:Lock)                    
                                                                                
 Transfer Group ID     : GRP01                                                  
 Pre-send Job ID       :                                                        
 Successful Job ID     :                                                        
 Unsuccessful Job ID   :                                                        
                                                                                
 Comment :

Screen 4.3 Send Management Information registration

When the entry is complete, press the Enter key. The screen returns to the System Configuration screen to complete the registration. To stop the registration, press the F3 key.