Transfer Status List screen
The Transfer Status List screen displays a list of the current transfer statuses.
For details on how to display the screen, refer to Confirmation of the transfer status.
<<Transfer Status List>> 1 - 1 / 1
COMMAND ==> SCROLL ===> PAGE
Type Status File ID Host Name Date Time Record CNT Con
Send Transferring FILE0001 ZOS 12/29/2017 17:48:25 0000000000 LAN
******************************* Bottom of data ********************************
Screen 4.21 Transfer Status List Screen
Transfer Status List Screen
<Explanation of Each Field>
- Type
-
This field shows the type (Send or Receive) of each status.
- Status
-
This field shows the current status.
- Transferring:
-
HULFT is transferring the relevant file.
- Connect:
-
HULFT is trying to establish connection with the host on the receiving side.
- Send Queue:
-
Either the file information has been placed in the Send Queue because the Send Multiplex Level has been exceeded, or the Send processing has not started yet.
- Standby:
-
HULFT does not start the transfer until it establishes reconnection for the Receive processing.
- Auto Resend:
-
HULFT does not start the transfer until it carries out auto resending.
- Executing Job:
-
A job is in execution.
- Canceling:
-
HULFT is carrying out cancelation processing.
- File ID
-
This field shows the file ID (first 8 bytes).
For the transfer status for instant transfer, "_INSTANT" is displayed as the file ID.
- Host Name
-
This field shows the host name (first 8 bytes) of the host with which HULFT establishes communication.
- Date
-
This field shows the date when a request is acknowledged.
- Time
-
This field shows the time when a request is acknowledged.
- Record_CNT
-
This field shows the record count (up to 10 digits) of the file.
What is displayed varies depending on the type of the status and the transfer mode, as follows:
-
In the case of the Send processing
- Direct Transfer:
-
000000000
- Work File Transfer:
-
Total record count of the Send file
-
In the case of the Receive processing
This field shows the number of received records.
When HULFT acknowledges the Resend File or the Send Request and carries out the Send processing, the total record count of the Send file is displayed, regardless of whether the transfer mode is the Direct Transfer or the Work File Transfer.
-
- Con
-
This field shows the connection type.
- LAN:
-
LAN Connection host
-
To display the latest transfer statuses, enter 'R' for the COMMAND and press the Enter key.
-
If the Status is 'Connect' or 'Standby,' the Status also displays the retry count. Although you can retry up to 32,760 times, the screen can display up to 4 digits of the retry count. Even if the retry count exceeds 9,999, the display remains '9999.'
Transfer Status List screen (with increased number of characters for Host Name and Record Count)
The Transfer Status List screen (with increased number of characters for the Host Name and the Record Count) displays the host name and the number of records in extended display areas.
To display the Transfer Status List screen (with increased number of characters for the Host Name and the Record Count), enter 'S' for the COMMAND on the Transfer Status List screen and press the Enter key.
To return to the Transfer Status List screen, enter 'BASIC' or 'B' for the COMMAND on the Transfer Status List screen (with increased number of characters for the Host Name and the Record Count) and press the Enter key.
<<Transfer Status List>>
COMMAND ==> SCROLL ===> PAGE
Type Status File ID Host Name Record CNT
Send Transferring FILE0001 ZOS 000000000000002
******************************* Bottom of data ********************************
Screen 4.22 Transfer Status List Screen (with Increased Number of Characters for Host Name and Record Count)
<Explanation of Each Field>
- Type
-
This field shows the type (Send or Receive) of each status.
- Status
-
This field shows the current status.
- Transferring:
-
HULFT is transferring the relevant file.
- Connect:
-
HULFT is trying to establish connection with the host on the receiving side.
- Send Queue:
-
Either the file information has been placed in the Send Queue because the Send Multiplex Level has been exceeded, or the Send processing has not started yet.
- Standby:
-
HULFT does not start the transfer until it establishes reconnection for the Receive processing.
- Auto Resend:
-
HULFT does not start the transfer until it carries out auto resending.
- Executing Job:
-
A job is in execution.
- Canceling:
-
HULFT is carrying out cancelation processing.
- File ID
-
This field shows the file ID (first 8 bytes).
For the transfer status for instant transfer, "_INSTANT" is displayed as the file ID.
- Host Name
-
This field shows the host name (first 20 bytes) of the host with which HULFT establishes communication.
- Record Count
-
This field shows the record count (up to 15 digits) of the file.
Transfer Status List screen (with full display of File ID)
The Transfer Status List screen (with full display of the File ID) displays each file ID in an extended display area.
To display the Transfer Status List screen (with full display of the File ID), enter 'EXTENT' or 'E' for the COMMAND on the Transfer Status List screen and press the Enter key.
To return to the Transfer Status List screen, enter 'BASIC' or 'B' for the COMMAND on the Transfer Status List screen (with full display of the File ID) and press the Enter key.
<<Transfer Status List>> 1 - 1 / 1
COMMAND ==> SCROLL ===> PAGE
Type Status File ID
Send Transferring FILE00018TOKYO8TO8NEWYORK
******************************* Bottom of data ********************************
Screen 4.23 Transfer Status List Screen (with Full Display of File ID)
<Explanation of Each Field>
- Type
-
This field shows the type (Send or Receive) of each status.
- Status
-
This field shows the current status.
- Transferring:
-
HULFT is transferring the relevant file.
- Connect:
-
HULFT is trying to establish connection with the host on the receiving side.
- Send Queue:
-
Either the file information has been placed in the Send Queue because the Send Multiplex Level has been exceeded, or the Send processing has not started yet.
- Standby:
-
HULFT does not start the transfer until it establishes reconnection for the Receive processing.
- Auto Resend:
-
HULFT does not start the transfer until it carries out auto resending.
- Executing Job:
-
A job is in execution.
- Canceling:
-
HULFT is carrying out cancelation processing.
- File ID
-
This field shows the file ID (50 bytes).
For the transfer status for instant transfer, "_INSTANT_TRANSFER_" is displayed as the file ID.
Transfer Status List screen (with display of SEQ No.)
The Transfer Status List screen (with display of the SEQ No.) displays the SEQ No.
To display the Transfer Status List screen (with display of the SEQ No.), enter 'ID' or 'I' for the COMMAND on the Transfer Status List screen and press the Enter key.
To return to the Transfer Status List screen, enter 'BASIC' or 'B' for the COMMAND on the Transfer Status List screen (with display of the SEQ No.) and press the Enter key.
<<Transfer Status List>>
COMMAND ==> SCROLL ===> PAGE
Type Status File ID Host Name SEQ No.
Send Transferring FILE0001 ZOS 000000000000040
******************************* Bottom of data ********************************
Screen 4.24 Transfer Status List Screen (with Display of SEQ No.)
<Explanation of Each Field>
- Type
-
This field shows the type (Send or Receive) of each status.
- Status
-
This field shows the current status.
- Transferring:
-
HULFT is transferring the relevant file.
- Connect:
-
HULFT is trying to establish connection with the host on the receiving side.
- Send Queue:
-
Either the file information has been placed in the Send Queue because the Send Multiplex Level has been exceeded, or the Send processing has not started yet.
- Standby:
-
HULFT does not start the transfer until it establishes reconnection for the Receive processing.
- Auto Resend:
-
HULFT does not start the transfer until it carries out auto resending.
- Executing Job:
-
A job is in execution.
- Canceling:
-
HULFT is carrying out cancelation processing.
- File ID
-
This field shows the file ID (first 8 bytes).
For the transfer status for instant transfer, "_INSTANT" is displayed as the file ID.
- Host Name
-
This field shows the host name (first 20 bytes) of the host with which HULFT establishes communication.
- SEQ No.
-
This field shows the Send SEQ No. or the Receive SEQ No.
Transfer Status List screen (with display of Data Set Name)
On the Transfer Status List screen (with display of Data Set Name), data set names are displayed.
To display the Transfer Status List screen (with display of Data Set Name), enter "DSNAME" or "D" for COMMAND on the Transfer Status List screen and press the Enter key.
To return to the Transfer Status List screen, enter "BASIC" or "B" for COMMAND on the Transfer Status List screen (with display of Data Set Name) and press the Enter key.
<<Transfer Status List>> 1 - 1 / 1
COMMAND ==> SCROLL ===> PAGE
Type File ID Host Name File Name
Send FILE0001 ZOS HULFT.DATA1(SND)
******************************* Bottom of data ********************************
Screen 4.25 Transfer Status List screen (with display of Data Set Name)
<Explanation of each field>
- Type
-
This field shows the type (Send or Receive) of each status.
- File ID
-
This field shows the file ID (first 8 bytes).
For the transfer status for instant transfer, "_INSTANT" is displayed as the file ID.
- Host Name
-
This field shows the host name (first 8 bytes) of the host with which HULFT establishes communication.
- Data Set Name
-
This field shows the data set name of the file in transfer.
When Type is set as "Send", the data set name of the send file is displayed.
When Type is set as "Receive", the data set name of the receive file is displayed.