Send Management Information List screen and Send Management Information Update screen
Send Management Information List Screen
Send Management Information List Screen
This screen displays a list of the registered records of the Send Management Information.
<<Send Management Information List>> 1 - 6 / 6
COMMAND ==> SCROLL ===> PAGE
COMMAND E: Go to Extension
File ID Transfer Transfer Comment
Type Group ID
FILE0001 TEXT GRP0018T TRANSFER TOKYO TO NEWYORK
SND00001 BNR GRP01 BINARY TRANSFER FILE-ID
SND00002 TEXT GRP02 TEXT TRANSFER FILE-ID
SND00003 FMT GRP03 FORMAT TRANSFER FILE-ID
SND00004 MFMT GRM04 MULT-FORMAT TRANSFER FILE-ID
SND00005 TEXT GRP05 TEXT TRANSFER FILE-ID_EX
******************************* Bottom of data ********************************
Screen 4.30 Send Management Information List Screen
<Explanation of Each Field>
- File ID
-
This field shows the file ID (first 8 bytes) of each registered record of the Send Management Information.
- Transfer Type
-
This field shows the transfer type that is registered for the file that is specified for the File ID.
- TEXT:
-
Text transfer
- BNR:
-
Binary transfer
- FMT:
-
Format transfer
- MFMT:
-
Multi format transfer
- Transfer Group ID
-
This field shows the transfer group ID (first 8 bytes) that is registered for the file that is specified for the File ID.
- Comment
-
This field shows the comment that is registered for the file that is specified for the File ID.
Send Management Information List screen (with full display of File ID)
The Send Management Information List screen (with full display of the File ID) displays each file ID and transfer group ID in an extended display area.
To display the Send Management Information List screen (with full display of the File ID), enter 'EXTENT' or 'E' for the COMMAND on the Send Management Information List screen and press the Enter key.
To return to the Send Management Information List screen, enter 'BASIC' or 'B' for the COMMAND on the Send Management Information List screen (with full display of the File ID) and press the Enter key.
<<Send Management Information List>> 1 - 6 / 6
COMMAND ==> SCROLL ===> PAGE
COMMAND B: Go to Basic
File ID Transfer Group ID
FILE00018TOKYO8TO8NEWYORK GRP0018TO8NEWYORK
SND00001 GRP01
SND00002 GRP02
SND00003 GRP03
SND00004 GRP04
SND00005SINCE12292017TOKYO GRP05
******************************* Bottom of data ********************************
Screen 4.31 Send Management Information List Screen (with Full Display of File ID)
<Explanation of Each Field>
- File ID
-
This field shows the file ID (50 bytes) of each registered record of the Send Management Information.
- Transfer Group ID
-
This field shows the transfer group ID (first 20 bytes) that is registered for the file that is specified for the File ID.
Send Management Information Update Screen
On this screen, you can register, modify, and copy the records of the Send Management Information.
The Send Management Information Update screen consists of the following screens:
-
Send Management Information Update (Basic) screen
-
Send Management Information Update (Extension) screen
Send Management Information Update (Basic) Screen
To display the Send Management Information Update (Basic) screen, enter 'S' in the input area on the left side of a file ID on the Send Management Information List screen and press the Enter key.
To return to the Send Management Information List screen, press PF3.
<<Send Management Information Update (Basic)>>
COMMAND ==>
COMMAND E: Go to Extension
File ID : FILE00018TOKYO8TO8NEWYORK
Mainframe DSN : HULFT.DATA(SND)
Volume Serial :
Transfer Mode : W (D:Direct W:Work File)
Work Volume Serial : Capacity : (C:CYL T:TRK O:OMIT)
1ST Extent : 5 Secondary : UNIT Quantity :
Transfer Type : T (F:FORMAT B:BINARY T:TEXT M:MULTI FORMAT)
Multi/Format ID :
Compression Preference: N (N:None 1:Horizontal 2:Vertical 3: DEFLATE)
Code Conversion : S (S:Sending Side R:Receiving Side N:No Conversion)
EBCDIC Set : 0 (0:AUT A:KN B:AL C:AC D:AP E:LOW F:EX G:NEC H:KX
V:U1 W:U2 X:U3)
Send File Mode : K (K:Keep C:Clear D:Delete L:Lock)
Transfer Group ID : GRP0018TO8NEWYORK
Pre-send Job ID :
Successful Job ID :
Unsuccessful Job ID :
Comment
TRANSFER TOKYO TO NEWYORK
Screen 4.32 Send Management Information Update (Basic) Screen
For details on each field, refer to Send Management Information.
Send Management Information Update (Extension) Screen
To display the Send Management Information Update (Extension) screen, enter 'EXTENT' or 'E' for the COMMAND on the Send Management Information Update (Basic) screen and press the Enter key.
To return to the Send Management Information Update (Basic) screen, enter 'BASIC' or 'B' for the COMMAND on the Send Management Information Update (Extension) screen and press the Enter key.
<<Send Management Information Update Enter Save, B, or E
COMMAND ==>
COMMAND B: Go to Basic
File ID : FILE00018TOKYO8TO8NEWYORK
Mainframe DSN : HULFT.DATA(SND)
Interface DBID :
Transfer Interval : 0 Transfer Priority : 50
Transfer Block Length: 0 Transfer Block Count : 0
Shiftcode Mode : C (C:Cut S:Space)
Subsequent Character : N (0:Cut Off NULL S:Cut Off Spaces
A:Both Cut N:No Cut-off)
UNIT :
Sequence Number :
Sending with RDW : N (N:No Y:Yes)
Cipher Key :
Comment
TRANSFER TOKYO TO NEWYORK
Screen 4.33 Send Management Information Update (Extension) Screen
For details on each field, refer to Send Management Information.
Generating a cipher key when Forced Strong Key mode is enabled
If Forced Strong Key Mode (STRONGKEYMODE) is set to "1" (Enabled) in the System Environment Settings, the value for Cipher Key can be generated in either of the following methods:
- Manual entry:
-
Move the cursor to the input-allowed field for Cipher Key and enter a 64 digits hexadecimal character string (containing characters from A to F and from 0 to 9).
- Auto generation:
-
Use the GENCIP command (or G) to generate a cipher key automatically.