System File Conversion messages

* XRLOGCNV * EXEC PARAMETER ERROR

Description:

An invalid execution parameter was specified.

Measures:

Correctly specify the execution parameters of the following:

• Version

  V7 or V8

• HULCHARSET

  Enter a value that is valid for use in HULFT. Refer to Administration Manual for details.

* XRLOGCNV * LOG FILE ORGANIZATION CHECK ERROR

Description:

The organization of the Send and Receive Log file (HULFT.LOG) is invalid.

Measures:

Specify the Send and Receive Log file (HULFT.LOG) in the valid organization.

* XRLOGCNV * LOG FILE OPEN FAILED

Description:

Failed to open the Send and Receive Log file (HULFT.LOG).

Measures:

The Send and Receive Log file (HULFT.LOG) was not created correctly. Correctly create the Send and Receive Log file (HULFT.LOG), and try again.

* XRLOGCNV * BACKUP OPEN FAILED

Description:

The backup file was not created correctly.

Measures:

Correctly create the backup file, and try again.

* XRLOGCNV * BACKUP IS NOT VARIABLE RECORD

Description:

The backup file was not created as a variable-length file.

Measures:

Create the backup file as a variable-length file, and try again.

* XRLOGCNV * LOG PUT FAILED RC=code

code:

Status code (Refer to Table 2.9 .)

Description:

Failed to output to the Send and Receive Log file (HULFT.LOG).

Measures:

The capacity of the Send and Receive Log file (HULFT.LOG) may be insufficient, or there could be another cause. Check the capacity and attributes of the Send and Receive Log file (HULFT.LOG), and then re-create the file.

* XRLOGCNV * LOG1 PUT FAILED RC=code

code:

Status code (Refer to Table 2.9 .)

Description:

Failed to output to the Send and Receive Log file (XRLOG1).

Measures:

The capacity of the Send and Receive Log file (HULFT.LOG) may be insufficient, or there could be another cause. Check the capacity and attributes of the Send and Receive Log file (HULFT.LOG), and then re-create the file.

* XRLOGCNV * LOG2 PUT FAILED RC=code

code:

Status code (Refer to Table 2.9 .)

Description:

Failed to output to the Send and Receive Log file (XRLOG2).

Measures:

The capacity of the Send and Receive Log file (HULFT.LOG) may be insufficient, or there could be another cause. Check the capacity and attributes of the Send and Receive Log file (HULFT.LOG), and then re-create the file.

* XRLOGCNV * INVALID LOG RECORD INCLUDED

Description:

Failed to convert some log records. Unable to output the failed log record.

Measures:

Check if the specified version and the backup file are correct.

* XRLOGCNV * LOG CONVERSION PHASE COMPLETED

Description:

Conversion of the Send and Receive Log file (HULFT.LOG) ended successfully.

* XRLOGCNV * LOG FILE VERSION ERROR

Description:

There is a version error in the Send and Receive Log file (HULFT.LOG).

Measures:

The Send and Receive Log file (HULFT.LOG) is not the latest version. Follow the installation procedure to correctly create a file of the latest version.

* XRLOGCNV * INSUFFICIENT MEMORY

Description:

The available memory is insufficient to run this program.

Measures:

Either reduce the number of files to convert or increase the REGION size, and try again.

* XRFILCNV * EXEC PARAMETER IS INVALID

Description:

An invalid execution parameter was specified.

Measures:

Correctly specify the execution parameters of the following:

• Version

  V7 or V8

• HULCHARSET

  Enter a value that is valid for use in HULFT. Refer to Administration Manual for details.

* XRFILCNV * FILE OPEN FAILED R/C=code FDBK=fdbk

code:

Status code (Refer to Table 2.10 .)

fdbk:

Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)

Description:

Failed to open the Send and Receive Management file (HULFT.FILE).

Measures:

The Send and Receive Management file (HULFT.FILE) was not created correctly. Correctly create the Send and Receive Management file (HULFT.FILE), and try again.

* XRFILCNV * rec-cnt RECORDS CONVERSION COMPLETED

rec-cnt:

Number

Description:

Conversion of the number of records of the Send and Receive Management file (HULFT.FILE) specified for rec-cnt ended successfully.

* XRFILCNV * FILE PUT FAILED R/C=code FDBK=fdbk

code:

Status code (Refer to Table 2.10 .)

fdbk:

Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)

Description:

Failed to output to the Send and Receive Management file (HULFT.FILE).

Measures:

The capacity of the Send and Receive Management file (HULFT.FILE) may be insufficient, or there could be another cause. Check the capacity and attributes of the Send and Receive Management file (HULFT.FILE), and then re-create the file.

* XRFILCNV * HOST PUT FAILED R/C=code FDBK=fdbk

code:

Status code (Refer to Table 2.10 .)

fdbk:

Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)

Description:

Failed to output records to the Host Information file (HULFT.HOST).

Measures:

The capacity of the Host Information file (HULFT.HOST) may be insufficient, or there could be another cause. Check the capacity and attributes of the Host Information file (HULFT.HOST), and then re-create the file.

* XRFILCNV * HOST INFORMATION IS ALREADY EXIST

Description:

The definition for the Host Information file (HULFT.HOST) is already registered in the Send and Receive Management file (HULFT.FILE).

* XRFILCNV * FILE VSAM ACCESS ERROR

Description:

An error occurred during access of the Send and Receive Management file (HULFT.FILE).

Measures:

Check the attributes of the Send and Receive Management file (HULFT.FILE), and whether or not the Send and Receive Management file (HULFT.FILE) is being used by a different user job.

* XRFILCNV * SYSTEM FILE VERSION ERROR

Description:

There is a version error in the Send and Receive Management file (HULFT.FILE).

Measures:

The Send and Receive Management file (HULFT.FILE) and the Host Information file (HULFT.HOST) are not the latest versions. Follow the installation procedure to correctly create a file of the latest version.

* XRFILCNV * NOT CONVERTED FMTID : WARNING RCVID : rcvid

rcvid:

Receive File ID

Description:

The value of the Format ID field that is set for the applicable Receive File ID will be ineffective.

Measures:

If you intend to carry out format transfer, check the Send Management Information and the Format Information on the host on the sending side and reconfigure the settings if necessary.

* XRFILCNV * NOT CONVERTED DESTINATION-PROXY : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Global Net Proxy Server Name is specified in the applicable Host Information record, but does not need to be specified. The Global Net Proxy Server Name has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED DESTINATION-PROXY-PORT : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Global Net Proxy Port No. is specified in the applicable Host Information record, but does not need to be specified. The Global Net Proxy Port No. has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED DBID : WARNING SNDID : sndid

sndid:

Send File ID

Description:

Conversion was not carried out, because the Interface DBID is specified for the applicable Send file ID, but does not need to be specified. The Interface DBID has been removed from the Send Management Information.

* XRFILCNV * NOT CONVERTED DOMAIN : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Domain name is specified in the applicable Host Information record, but does not need to be specified. The Domain Name has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED UNITTYPE : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Device Type is specified in the applicable Host Information record, but does not need to be specified. The Device Type has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED DEVINF1 : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Device Information 1 is specified in the applicable Host Information record, but does not need to be specified. The Device Information 1 has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED DEVINF2 : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out, because the Device Information 2 is specified in the applicable Host Information record, but does not need to be specified. The Device Information 2 has been removed from the Host Information record.

* XRFILCNV * NOT CONVERTED CONNECTTYPE : WARNING HOST : hostid

hostid:

Host Name

Description:

Conversion was not carried out with the connection type that is specified for the Connection Type in the applicable Host Information record. The Connection Type was changed to LAN.

* XRFILCNV * NOT CONVERTED COMMENT : WARNING 
             id1 : id2

Description:

The comment that is specified in the management information could not be converted.

* XRFILCNV * NOT CONVERTED : WARNING 
             id1 : id2

Description:

Cannot convert the comment because the file ID "_INSTANT_TRANSFER_" is a system-reserved word.

* XRFILCNV * RECORD DELETED : WARNING HOSTTYPE:hosttype HOST:hostid

hosttype:

Host Type

hostid:

Host Name

Description:

Conversion was not carried out because the host type that is specified in the applicable Host Information record is not supported. The Host Information record has been removed from the Host Information file.

* XRFILCNV * RECORD DELETED : WARNING KCODETYPE:kcodetype HOST:hostid

kcodetype:

Code Set for Transfer

hostid:

Host Name

Description:

Conversion was not carried out because the host type that is specified in the applicable Host Information record is not supported. The Host Information record has been removed from the Host Information file.

* XRFILCNV * RECORD DELETED : WARNING HOSTTYPE:hosttype KCODESET:kcodeset HOST:hostid

hosttype:

Host Type

kcodeset

Code Set for Transfer

hostid:

Host Name

Description:

Conversion was not carried out because the host type and the code set for the transfer specified in the applicable Host Information record are not supported. The Host Information record has been removed from the Host Information file.

* XRFILCNV * NOT CONVERTED SHIFT-CODE : WARNING SNDID : sndid

sndid:

Send File ID

Description:

The Shiftcode Mode specified for the applicable Send file ID was not used for the conversion. The Shiftcode Mode has been changed to C.