Operation Log messages
- XROP001
-
FILE ACCESS LOG1 PUT ERROR FDBK=fdbk
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to write records to File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP002
-
FILE ACCESS LOG2 PUT ERROR FDBK=fdbk
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to write records to File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP003
-
COMMAND LOG1 PUT ERROR FDBK=fdbk
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to write records to Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP004
-
COMMAND LOG2 PUT ERROR FDBK=fdbk
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to write records to Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP005
-
FILE ACCESS LOG1 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP006
-
FILE ACCESS LOG2 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP007
-
COMMAND LOG1 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP008
-
COMMAND LOG2 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP009
-
FILE ACCESS LOG BACKUP JOB SUBMIT FAILED
- Description:
-
Failed to back up the File Access Log file.
- Measures:
-
Check the settings that are related to the Operation Log Switch function in the System Environment Settings of HULFT.
For details about using the function, refer to the explanation on Automatic Switching of Operation Log in Administration Manual.
- XROP010
-
COMMAND LOG BACKUP JOB SUBMIT FAILED
- Description:
-
Failed to back up the Command Execution Log file.
- Measures:
-
Check the settings that are related to the Operation Log Switch function in the System Environment Settings of HULFT.
For details about using the function, refer to the explanation on Automatic Switching of Operation Log in Administration Manual.
- XROP011
-
INTRDR ALLOCATION ERROR
- Description:
-
Failed to allocate the internal reader.
- Measures:
-
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement.
- XROP012
-
INTRDR OPEN FAILED
- Description:
-
Failed to open the internal reader.
- Measures:
-
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement.
- XROP013
-
INTRDR CLOSE FAILED
- Description:
-
Failed to close the internal reader.
- Measures:
-
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement.
- XROP014
-
INTRDR FREE ERROR
- Description:
-
Failed to release the internal reader.
- Measures:
-
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement.
- XROP015
-
FILE ACCESS LOG SLOT1 GET RETRY
- Description:
-
Retry control information acquisition for the File Access Log file.
- XROP016
-
COMMAND LOG SLOT1 GET RETRY
- Description:
-
Retry control information acquisition for the Command Execution Log file.
- XROP017
-
FILE ACCESS LOG OUTPUT FAILED RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.13 .)
- fdbk:
-
Detail code (Refer to Table 2.13 .)
- Description:
-
Failed to output the record to the File Access Log.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
|
Error Code |
Detail Code |
Error Message |
|---|---|---|
|
4 |
0 |
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
8 |
Detail code of |
Failed to open the File Access Log file. Look up the detail code and take the appropriate measures. |
|
12 |
0 |
The File Access Log file is invalid. Re-create the File Access Log file. |
- XROP018
-
COMMAND LOG OUTPUT FAILED RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.14 .)
- fdbk:
-
Detail code (Refer to Table 2.14 .)
- Description:
-
Failed to output the record to the Command Execution Log.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
|
Error Code |
Detail Code |
Error Message |
|---|---|---|
|
4 |
0 |
This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
8 |
Detail code of |
Failed to open the Command Execution Log file. Look up the detail code and take the appropriate measures. |
|
12 |
0 |
The Command Execution Log file is invalid. Re-create the File Access Log file. |
- XROP019
-
FILE ACCESS LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.15 .)
- fdbk:
-
Detail code (Refer to Table 2.15 .)
- Description:
-
Failed to allocate File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
|
Error Code |
Detail Code |
Error Message |
|---|---|---|
|
4 |
Detail code of |
Failed to open the specified file. This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
8 |
The specified file does not exist in the catalog. This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
|
12 |
Failed to allocate the specified file. The detail code of the DYNALLOC macro is set for the detail code. |
- XROP020
-
FILE ACCESS LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.15 .)
- fdbk:
-
Detail code (Refer to Table 2.15 .)
- Description:
-
Failed to allocate File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP021
-
COMMAND LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.15 .)
- fdbk:
-
Detail code (Refer to Table 2.15 .)
- Description:
-
Failed to allocate Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP022
-
COMMAND LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.15 .)
- fdbk:
-
Detail code (Refer to Table 2.15 .)
- Description:
-
Failed to allocate Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP023
-
FILE ACCESS LOG SWITCH FAILED
- Description:
-
Failed to switch the File Access Log files. The File Access Log file may have become full.
- Measures:
-
Create a backup of the File Access Log with the Operation Log Switch program (XROPLBK). If there is no improvement, re-create the File Access Log file.
For details about the Operation Log Switch program (XROPLBK), refer to the explanation of Operation Log Switch in Operation Manual.
- XROP024
-
COMMAND LOG SWITCH FAILED
- Description:
-
Failed to switch the Command Execution Log. The Command Execution Log file may have become full.
- Measures:
-
Create a backup of the Command Execution Log with the Operation Log Switch program (XROPLBK).
If there is no improvement, re-create the Command Execution Log file. For details about the Operation Log Switch program (XROPLBK), refer to the explanation of Operation Log Switch in Operation Manual.
- XROP029
-
INSUFFICIENT MEMORY
- Description:
-
The available memory is insufficient to output Operation Log records.
- Measures:
-
Increase the REGION size and try again.
- XROP501
-
FILE ACCESS LOG1 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP502
-
FILE ACCESS LOG2 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP503
-
COMMAND LOG1 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP504
-
COMMAND LOG2 OPEN FAILED R/C=code FDBK=fdbk
- code:
-
Error code (Refer to Error code list.)
- fdbk:
-
Detail code of the VSAM macro (Refer to DFSMS Macro Instructions for Data Sets.)
- Description:
-
Failed to open Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the detail code and take the appropriate measures.
- XROP505
-
FILE ACCESS LOG BACKUP FAILED
- Description:
-
Failed to back up the File Access Log file.
- Measures:
-
An I/O error may have occurred in the File Access Log Backup file. This may be due to a problem in the environment settings of your operating system. Please check the settings of your environment.
- XROP506
-
COMMAND LOG BACKUP FAILED
- Description:
-
Failed to back up the Command Execution Log file.
- Measures:
-
An I/O error may have occurred in the Command Execution Log Backup file. This may be due to a problem in the environment settings of your operating system. Please check the settings of your environment.
- XROP507
-
FILE ACCESS LOG CLEAR FAILED
- Description:
-
Failed to clear the File Access Log file.
- Measures:
-
An I/O error may have occurred in the File Access Log file. This may be due to a problem in the environment settings of your operating system. Please check the settings of your environment.
- XROP508
-
COMMAND LOG CLEAR FAILED
- Description:
-
Failed to clear the Command Execution Log file.
- Measures:
-
An I/O error may have occurred in the Command Execution Log file. This may be due to a problem in the environment settings of your operating system. Please check the settings of your environment.
- XROP509
-
OPLFILEBK OPEN FAILED
- Description:
-
An error occurred during the attempt to open the File Access Log Backup file.
- Measures:
-
Correctly specify the File Access Log Backup file, and try again.
- XROP510
-
OPLCMDBK OPEN FAILED
- Description:
-
An error occurred during the attempt to open the Command Execution Log Backup file.
- Measures:
-
Correctly specify the Command Execution Log Backup file, and try again.
- XROP511
-
EXEC PARAMETER IS INVALID
- Description:
-
The specification method for the execution parameter is incorrect.
- Measures:
-
Check if the parameter is specified as 'FL,' 'CL,' or 'ALL' and try again.
- XROP512
-
FILE ACCESS LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate File Access Log file 1 (HULFT.OPLFILE1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
|
Error Code |
Detail Code |
Error Message |
|---|---|---|
|
4 |
Detail code of |
Failed to open the specified file. This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
8 |
The specified file does not exist in the catalog. This is HULFT system error. Contact your Technical Support Service representative, if you have already concluded the Technical Support Agreement. |
|
|
12 |
Failed to allocate the specified file. The detail code of the DYNALLOC macro is set for the detail code. |
- XROP513
-
FILE ACCESS LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate File Access Log file 2 (HULFT.OPLFILE2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP514
-
COMMAND LOG1 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate Command Execution Log file 1 (HULFT.OPLCMD1).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP515
-
COMMAND LOG2 ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate Command Execution Log file 2 (HULFT.OPLCMD2).
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP516
-
OPLFILEBK ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate the File Access Log Backup file.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP517
-
OPLCMDBK ALLOCATION ERROR RC=code FDBK=fdbk
- code:
-
Error code (Refer to Table 2.16 .)
- fdbk:
-
Detail code (Refer to Table 2.16 .)
- Description:
-
Failed to allocate the Command Execution Log Backup file.
- Measures:
-
Look up the error code and the detail code, and take the appropriate measures.
- XROP518
-
FILE ACCESS LOG SWITCH FAILED
- Description:
-
Failed to switch the File Access Log files. The File Access Log file may have become full.
- Measures:
-
Create a backup of the File Access Log with the Operation Log Switch program (XROPLBK). If there is no improvement, re-create the File Access Log file.
For details about the Operation Log Switch program (XROPLBK), refer to the explanation of Operation Log Switch in Operation Manual.
- XROP519
-
COMMAND LOG SWITCH FAILED
- Description:
-
Failed to switch the Command Execution Log. The Command Execution Log file may have become full.
- Measures:
-
Create a backup of the Command Execution Log with the Operation Log Switch program (XROPLBK).
If there is no improvement, re-create the Command Execution Log file. For details about the Operation Log Switch program (XROPLBK), refer to the explanation of Operation Log Switch in Operation Manual.