Official | Change default values of the System Environment Settings messages

* XRPRMSET * VERIFY ERROR

Description:

A discrepancy occurred between the default values of the System Environment Settings for HULFT load module library for JOBLIB or STEPLIB and those of HULFT load module library for SYSLMOD.

Only the default values of the System Environment for HULFT load module library specified in SYSLMOD have been changed.

Measures:

This message is a warning, and therefore has no effect on operation. This warning will not be output if HULFT load module library for JOBLIB or STEPLIB and HULFT load module library for SYSLMOD are configured with the same settings in the System Environment Settings Default Value Modification program (XRPRMSET).

* XRPRMSET * ASSEMBLER ERROR

Description:: Assembly failed.
Measures:: The region size may be insufficient.

* XRPRMSET * LINKAGE ERROR

Description:: Linkage failed.
Measures:: Check the status code and the job log, and try again.

* XRPRMSET * EXEC PARAMETER IS INVALID

Description:: The specification method for the execution parameter is incorrect.
Measures:: Correctly specify the JCL execution parameter.

* XRPRMSET * FILE OPEN ERROR DDNAME=ddname

ddname:: Name of the DD where the error occurred

Description:: Failed to open the file.
Measures:: Check the data set specified in the JCL DD statement.

* XRPRMSET * THIS PARAMETER IS UNDEFINED. paracard IGNORE

paracard:: Content of the parameter card

Description:: An unknown parameter card is specified.
Measures:: Specify a defined parameter card.

* XRPRMSET * PORTNO PARAMETER IS INVALID

Description:: There is an error in the defined PORTNO parameter card.
Measures:: Check if the parameter is set as a value from '1' to '65535.'

* XRPRMSET * TCPIP PARAMETER IS INVALID

Description:: There is an error in the defined TCPIP parameter card.
Measures:: Check if the parameter is set as the correct value of up to 8 bytes.

* XRPRMSET * UNIT PARAMETER IS INVALID

Description:: There is an error in the defined UNIT parameter card.
Measures:: Check if the UNIT name that has been specified is 8 characters or less.

* XRPRMSET * START-TASK PARAMETER IS INVALID

Description:: There is an error in the defined START-TASK parameter card.
Measures:: Check if the job name that has been specified is 8 characters or less. Also, check if the string begins with an alphabetic character.

* XRPRMSET * TASK-CNT PARAMETER IS INVALID

Description:: There is an error in the defined TASK-CNT parameter card.
Measures:: Check if the parameter is specified as a value from '1' to '100.'

* XRPRMSET * TASK-ABEND PARAMETER IS INVALID

Description:: There is an error in the defined TASK-ABEND parameter card.
Measures:: Check if the parameter is specified as either 'CONTINUE' or 'ABEND.'

* XRPRMSET * HOST-NAME PARAMETER IS INVALID

Description:: There is an error in the defined HOST-NAME parameter card.
Measures:: Check if the Host Name that has been specified is 8 characters or less.

* XRPRMSET * DATACHK PARAMETER IS INVALID

Description:: There is an error in the defined DATACHK parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * RETRY PARAMETER IS INVALID

Description:: There is an error in the defined RETRY parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '32760.'

* XRPRMSET * QDEL PARAMETER IS INVALID

Description:: There is an error in the defined QDEL parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * DOMAIN PARAMETER IS INVALID

Description:: There is an error in the defined DOMAIN parameter card.
Measures:: Check if the Domain name that has been specified is 68 characters or less.

* XRPRMSET * PREFIX PARAMETER IS INVALID

Description:: There is an error in the defined PREFIX parameter card.
Measures:: Check if the First Modifier of Send Work Files that has been specified is 8 characters or less. Also, check if the string begins with an alphabetic character.

* XRPRMSET * HSTCHA PARAMETER IS INVALID

Description:: There is an error in the defined HSTCHA parameter card.
Measures:: Check if the parameter is specified as either 'U' (Upper case) or 'L' (Lower case).

* XRPRMSET * CMPBLK PARAMETER IS INVALID

Description:: There is an error in the defined CMPBLK parameter card.
Measures:: Check if the parameter is specified as a value from '500' to '32760.'

* XRPRMSET * RECLEN PARAMETER IS INVALID

Description:: There is an error in the defined RECLEN parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * JOBTIME PARAMETER IS INVALID

Description:: There is an error in the defined JOBTIME parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '1440.'

* XRPRMSET * PSCHG PARAMETER IS INVALID

Description:: There is an error in the defined PSCHG parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' 'B,' 'F,' '9,' 'S,' or 'N.'

* XRPRMSET * PSASCII PARAMETER IS INVALID

Description:: There is an error in the defined PSASCII parameter card.
Measures:: Check if the parameter is specified as either '1' or '2.'

* XRPRMSET * PSEBCDIC PARAMETER IS INVALID

Description:: There is an error in the defined PSEBSDIC parameter card.
Measures:: Check if the parameter is specified as either '1' or '2.'

* XRPRMSET * DYNAMIC-DIRECT PARAMETER IS INVALID

Description:: There is an error in the defined DYNAMIC-DIRECT parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * TIMEOUT PARAMETER IS INVALID

Description:: There is an error in the defined TIMEOUT parameter card.
Measures:: Check if the time-out is specified as the correct value.

* XRPRMSET * SCANMODE PARAMETER IS INVALID

Description:: There is an error in the defined SCANMODE parameter card.
Measures:: Check if the parameter is specified as either 'A' or 'N.'

* XRPRMSET * WORKVOLMODE PARAMETER IS INVALID

Description:: There is an error in the defined WORKVOLMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * ENDERRMODE PARAMETER IS INVALID

Description:: There is an error in the defined ENDERRMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * TGRPCHK PARAMETER IS INVALID

Description:: There is an error in the defined TGRPCHK parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' or '2.'

* XRPRMSET * HSTCHK PARAMETER IS INVALID

Description:: There is an error in the defined HSTCHK parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * INIT-UNIT PARAMETER IS INVALID

Description:: There is an error in the defined INIT-UNIT parameter card.
Measures:: Check if the INIT-UNIT name that has been specified is 8 characters or less.

* XRPRMSET * JLIB1 PARAMETER IS INVALID

Description:: There is an error in the defined JLIB1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JLIB2 PARAMETER IS INVALID

Description:: There is an error in the defined JLIB2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JLIB3 PARAMETER IS INVALID

Description:: There is an error in the defined JLIB3 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JELIB1 PARAMETER IS INVALID

Description:: There is an error in the defined JELIB1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JELIB2 PARAMETER IS INVALID

Description:: There is an error in the defined JELIB2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JELIB3 PARAMETER IS INVALID

Description:: There is an error in the defined JELIB3 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JCAT1 PARAMETER IS INVALID

Description:: There is an error in the defined JCAT1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JCAT2 PARAMETER IS INVALID

Description:: There is an error in the defined JCAT2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JCAT3 PARAMETER IS INVALID

Description:: There is an error in the defined JCAT3 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JECAT1 PARAMETER IS INVALID

Description:: There is an error in the defined JECAT1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JECAT2 PARAMETER IS INVALID

Description:: There is an error in the defined JECAT2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JECAT3 PARAMETER IS INVALID

Description:: There is an error in the defined JECAT3 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * JLIB1 IS NOT SPECIFIED;IGNORE

Description:: The JLIB1 parameter card is not defined.
Measures:: You can specify up to 3 libraries for STEPLIB. Check if they are specified in order, starting with JLIB1.

* XRPRMSET * JELIB1 IS NOT SPECIFIED;IGNORE

Description:: The JELIB1 parameter card is not defined.
Measures:: You can specify up to 3 libraries for STEPLIB. Check if they are specified in order, starting with JELIB1.

* XRPRMSET * JCAT1 IS NOT SPECIFIED;IGNORE

Description:: The JCAT1 parameter card is not defined.
Measures:: You can specify up to 3 catalog data sets for STEPCAT. Check if they are specified in order, starting with JCAT1.

* XRPRMSET * JECAT1 IS NOT SPECIFIED;IGNORE

Description:: The JECAT1 parameter card is not defined.
Measures:: You can specify up to 3 catalog data sets for STEPCAT. Check if they are specified in order, starting with JECAT1.

* XRPRMSET * CLEARMODE PARAMETER IS INVALID

Description:: There is an error in the defined CLEARMODE parameter card.
Measures:: Check if the parameter is specified as either 'A' or 'B.'

* XRPRMSET * JESC PARAMETER IS INVALID

Description:: There is an error in the defined JESC parameter card.
Measures:: Specify 1 byte in symbols.

* XRPRMSET * SNDRETRY PARAMETER IS INVALID

Description:: There is an error in the defined SNDRETRY parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '9999.'

* XRPRMSET * SNDRTIME PARAMETER IS INVALID

Description:: There is an error in the defined SNDRTIME parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '1440.'

* XRPRMSET * EUCSP PARAMETER IS INVALID

Description:: There is an error in the defined EUCSP parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * SNDBNO PARAMETER IS INVALID

Description:: There is an error in the defined SNDBNO parameter card.
Measures:: Check if the parameter is specified as a value from '1' to '255.'

* XRPRMSET * RCVBNO PARAMETER IS INVALID

Description:: There is an error in the defined RCVBNO parameter card.
Measures:: Check if the parameter is specified as a value from '1' to '255.'

* XRPRMSET * RCVOVER-RTY PARAMETER IS INVALID

Description:: There is an error in the defined RCVOVER-RTY parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * EBCDIC PARAMETER IS INVALID

Description:: There is an error in the defined EBCDIC parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * STATUSDISPLAY PARAMETER IS INVALID

Description:: There is an error in the defined STATUSDISPLAY parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * LOGDELTHRESHOLD PARAMETER IS INVALID

Description:: There is an error in the defined LOGDELTHRESHOLD parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '999999.'

* XRPRMSET * LOGKEEPCOUNT PARAMETER IS INVALID

Description:: There is an error in the defined LOGKEEPCOUNT parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '999999.'

* XRPRMSET * LOGKEEPCOUNT IS GREATER THAN LOGDELTHRESHOLD

Description:: The value for LOGKEEPCOUNT exceeds the value for LOGDELTHRESHOLD.
Measures:: Specify a value for the Log Keep Count that is less than the value for the Log Deletion Threshold.

* XRPRMSET * LOGKEEPCOUNT IS NOT SPECIFIED

Description:: The LOGKEEPCOUNT parameter card is not defined.
Measures:: This field is required when the LOGDELTHRESHOLD parameter is specified. Check both fields.

* XRPRMSET * GAIJIFILE PARAMETER IS INVALID

Description:: There is an error in the defined GAIJIFILE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * GAIJIERR PARAMETER IS INVALID

Description:: There is an error in the defined GAIJIERR parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * SOCKERR-AUTORETRY PARAMETER IS INVALID

Description:: There is an error in the defined SOCKERR-AUTORETRY parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '9.'

* XRPRMSET * RETRYTIME PARAMETER IS INVALID

Description:: There is an error in the defined RETRYTIME parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '99999.'

* XRPRMSET * MSGDYNPARM PARAMETER IS INVALID

Description:: There is an error in the defined MSGDYNPARM parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '3.'

* XRPRMSET * CIPHERTYPE PARAMETER IS INVALID

Description:: There is an error in the defined CIPHERTYPE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * JOBNM PARAMETER IS INVALID

Description:: There is an error in the defined JOBNM parameter card.
Measures:: Specify in alphanumeric characters within 8 bytes.

* XRPRMSET * CLASS PARAMETER IS INVALID

Description:: There is an error in the defined CLASS parameter card.
Measures:: Specify 1 byte in alphanumeric characters.

* XRPRMSET * MSGCLASS PARAMETER IS INVALID

Description:: There is an error in the defined MSGCLASS parameter card.
Measures:: Specify 1 byte in alphanumeric characters.

* XRPRMSET * JOBOP1 PARAMETER IS INVALID

Description:: There is an error in the defined JOBOP1 parameter card.
Measures:: Specify in alphanumeric characters within 30 bytes.

* XRPRMSET * JOBOP2 PARAMETER IS INVALID

Description:: There is an error in the defined JOBOP2 parameter card.
Measures:: Specify in alphanumeric characters within 30 bytes.

* XRPRMSET * RECV-TASK PARAMETER IS INVALID

Description:: There is an error in the defined RECV-TASK parameter card.
Measures:: Check if alphanumeric characters within 8 bytes have been specified. Also, check if the string begins with an alphabetic character.

* XRPRMSET * PRODUCTKEY PARAMETER IS INVALID

Description:: There is an error in the defined PRODUCTKEY parameter card.
Measures:: Check if the parameter is specified as the correct value of 25 bytes.

* XRPRMSET * SERIALNO PARAMETER IS INVALID

Description:: There is an error in the defined SERIALNO parameter card.
Measures:: Check if the parameter is specified as the correct value.

* XRPRMSET * SAN-VER5 PARAMETER IS INVALID

Description:: There is an error in the defined SAN-VER5 parameter card.
Measures:: Check if the parameter is specified as either 'H' or 'F.'

* XRPRMSET * RESENDDEL PARAMETER IS INVALID

Description:: There is an error in the defined RESENDDEL parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' '2,' '3,' or '9.'

* XRPRMSET * REQWAITMODE PARAMETER IS INVALID

Description:: There is an error in the defined REQWAITMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * CONSMSG PARAMETER IS INVALID

Description:: There is an error in the defined CONSMSG parameter card.
Measures:: Specify in alphanumeric characters within 8 bytes.

* XRPRMSET * DEFER PARAMETER IS INVALID

Description:: There is an error in the defined DEFER parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * OPLSELECT PARAMETER IS INVALID

Description:: There is an error in the defined OPLSELECT parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '3.'

* XRPRMSET * OPLCMD1 PARAMETER IS INVALID

Description:: There is an error in the defined OPLCMD1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * OPLCMD2 PARAMETER IS INVALID

Description:: There is an error in the defined OPLCMD2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * PARAMETER VALUES OF OPLCMD1 AND OPLCMD2 ARE THE SAME

Description:: The values defined on the OPLCMD1 parameter card and the OPLCMD2 parameter card are the same.
Measures:: Correctly define the OPLCMD1 parameter card and the OPLCMD2 parameter card.

* XRPRMSET * OPLFILE1 PARAMETER IS INVALID

Description:: There is an error in the defined OPLFILE1 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * OPLFILE2 PARAMETER IS INVALID

Description:: There is an error in the defined OPLFILE2 parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * PARAMETER VALUES OF OPLFILE1 AND OPLFILE2 ARE THE SAME

Description:: The values defined on the OPLFILE1 parameter card and the OPLFILE2 parameter card are the same.
Measures:: Correctly define the OPLFILE1 parameter card and the OPLFILE2 parameter card.

* XRPRMSET * OPLCHARACTER LENGTH OVER

Description:: The value exceeds the byte count that can be defined on the OPLCHARACTER parameter card. Set a value up to the Byte Count that can be specified for the OPLCHARACTER parameter card.

* XRPRMSET * OPLEBCDIC PARAMETER IS INVALID

Description:: There is an error in the defined OPLEBCDIC parameter card.
Measures:: Check if the parameter is specified as 'A,' 'B,' 'E,' 'F,' or 'H.'

* XRPRMSET * USRIDCHKMODE PARAMETER IS INVALID

Description:: There is an error in the defined USRIDCHKMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * APTHSTCHK PARAMETER IS INVALID

Description:: There is an error in the defined APTHSTCHK parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * JCLRETRY PARAMETER IS INVALID

Description:: There is an error in the defined JCLRETRY parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '9999.'

* XRPRMSET * JCLRTIME PARAMETER IS INVALID

Description:: There is an error in the defined JCLRTIME parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '1440.'

* XRPRMSET * OPLCMDBKVOL PARAMETER IS INVALID

Description:: There is an error in the defined OPLCMDBKVOL parameter card.
Measures:: Check if the volume serial number that has been specified is 6 characters or less.

* XRPRMSET * OPLFILEBKVOL PARAMETER IS INVALID

Description:: There is an error in the defined OPLFILEBKVOL parameter card.
Measures:: Check if the volume serial number that has been specified is 6 characters or less.

* XRPRMSET * OPLUNIT PARAMETER IS INVALID

Description:: There is an error in the defined OPLUNIT parameter card.
Measures:: Check if the UNIT name that has been specified is 8 characters or less.

* XRPRMSET * OPLCMDBK PARAMETER IS INVALID

Description:: There is an error in the defined OPLCMDBK parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * OPLFILEBK PARAMETER IS INVALID

Description:: There is an error in the defined OPLFILEBK parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * OPLBKJOBNM PARAMETER IS INVALID

Description:: There is an error in the defined OPLBKJOBNM parameter card.
Measures:: Check if the parameter is specified as the correct value of 8 bytes.

* XRPRMSET * HULPRMFILE PARAMETER IS INVALID

Description:: There is an error in the defined HULPRMFILE parameter card.
Measures:: Check if the parameter is set according to the naming conventions for the data set.

* XRPRMSET * PROCTRANSTYPE PARAMETER IS INVALID

Description:: There is an error in the defined PROCTRANSTYPE parameter card.
Measures:: Check if the parameter is specified as 'N,' 'S,' 'R,' or 'A.'

* XRPRMSET * PARAMETER VALUES OF OPLCMDBK AND OPLFILEBK ARE THE SAME

Description:: The values defined on the OPLFILEBK parameter card and the OPLCMDBK parameter card are the same.
Measures:: Correctly define the OPLFILEBK parameter card and the OPLCMDBK parameter card.

* XRPRMSET * CNVLENCHK PARAMETER IS INVALID

Description:: There is an error in the defined CNVLENCHK parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * SNDSOCKSIZE PARAMETER IS INVALID

Description:: There is an error in the defined SNDSOCKSIZE parameter card.
Measures:: Check that '0' or a value from '4096' to '262144' is specified.

* XRPRMSET * RCVSOCKSIZE PARAMETER IS INVALID

Description:: There is an error in the defined RCVSOCKSIZE parameter card.
Measures:: Check that '0' or a value from '4096' to '524288' is set.

* XRPRMSET * HULLANG PARAMETER IS INVALID

Description:: There is an error in the defined HULLANG parameter card.
Measures:: Check that 'JPN' or 'ENG' is set.

* XRPRMSET * DATEFMT PARAMETER IS INVALID

Description:: There is an error in the defined DATEFMT parameter card.
Measures:: Check that '1,' '2,' or '3' is set for the Date Format.

* XRPRMSET * PROCCIPHER PARAMETER IS INVALID

Description:: There is an error in the defined PROCCIPHER parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * INFBUFSIZE PARAMETER IS INVALID

Description:: There is an error in the defined INFBUFSIZE parameter card.
Measures:: Check that a value from '32768' to '262144' is set.

* XRPRMSET * TTMODE PARAMETER IS INVALID

Description:: There is an error in the defined TTMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * TTRCVOMIT PARAMETER IS INVALID

Description:: There is an error in the defined TTRCVOMIT parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * TTRCVFILOUTPUT PARAMETER IS INVALID

Description:: There is an error in the defined TTRCVFILOUTPUT parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * TTPRESNDJOB PARAMETER IS INVALID

Description:: There is an error in the defined TTPRESNDJOB parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' or '2.'

* XRPRMSET * TTSNDJOB PARAMETER IS INVALID

Description:: There is an error in the defined TTSNDJOB parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' or '2.'

* XRPRMSET * TTRCVJOB PARAMETER IS INVALID

Description:: There is an error in the defined TTRCVJOB parameter card.
Measures:: Check if the parameter is specified as '0,' '1,' or '2.'

* XRPRMSET * TTSNDRCVLOG PARAMETER IS INVALID

Description:: There is an error in the defined TTSNDRCVLOG parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * OUTSTSKID PARAMETER IS INVALID

Description:: There is an error in the defined OUTSTSKID parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * CNSSELECT PARAMETER IS INVALID

Description:: There is an error in the defined CNSSELECT parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * RPREFIX PARAMETER IS INVALID

Description:: There is an error in the defined RPREFIX parameter card.
Measures:: Check if the specification for RPREFIX is 8 characters or less.

* XRPRMSET * INDOPTVAR PARAMETER IS INVALID

Description:: There is an error in the defined INDOPTVAR parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * SND-SEQNO-THRESHOLD PARAMETER IS INVALID

Description:: There is an error in the defined SND-SEQNO-THRESHOLD parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '999999999999999.'

* XRPRMSET * RESND-QUELISTNO-THRESHOLD PARAMETER INVALID

Description:: There is an error in the defined RESND-QUELISTNO-THRESHOLD parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '999999999.'

* XRPRMSET * TERMLICENSEKEY PARAMETER IS INVALID

Description:: There is an error in the defined TERMLICENSEKEY parameter card.
Measures:: Check if the parameter is specified as the correct value.

* XRPRMSET * HULCHARSET PARAMETER IS INVALID

Description:: There is an error in the defined HULCHARSET parameter card.
Measures:: Specify the CCSID (Coded Character Set Identifier) value of the emulator in use. For details, refer to Administration Manual.

* XRPRMSET * CS4TRNSFR PARAMETER IS INVALID

Description:: There is an error in the defined CS4TRNSFR parameter card.
Measures:: Check if the parameter is specified as either 'I' or '8.'

* XRPRMSET * LISTEN PARAMETER IS INVALID

Description:: There is an error in the defined LISTEN parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '2147483647.'

* XRPRMSET * SND-START-MODE PARAMETER IS INVALID

Description:: There is an error in the defined SND-START-MODE parameter card.
Measures:: Check if the parameter is specified as "WARM", "COLD", "COLD2", or "COLD3".

* XRPRMSET * RCV-APPLNM PARAMETER IS INVALID

Description:: There is an error in the defined RCV-APPLNM parameter card.
Measures:: Check if an alphanumeric value of 8 characters or less has been specified.

* XRPRMSET * RCV-MAXCON PARAMETER IS INVALID

Description:: There is an error in the defined RCV-MAXCON parameter card.
Measures:: Check if the parameter is specified as a value from '1' to '100.'

* XRPRMSET * RCV-RECCHK PARAMETER IS INVALID

Description:: There is an error in the defined RCV-RECCHK parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * RCV-FILE-WAIT PARAMETER IS INVALID

Description:: There is an error in the defined RCV-FILE-WAIT parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * RCV-FILE-SEARCH PARAMETER IS INVALID

Description:: There is an error in the defined RCV-FILE-SEARCH parameter card.
Measures:: Check if the parameter is specified as either "V" or "C".

* XRPRMSET * RCV-FILE-RETRY PARAMETER IS INVALID

Description:: There is an error in the defined RCV-FILE-RETRY parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '9999.'

* XRPRMSET * RCV-FILE-RTIME PARAMETER IS INVALID

Description:: There is an error in the defined RCV-FILE-RTIME parameter card.
Measures:: Check if the parameter is specified as a value from '0' to '32760.'

* XRPRMSET * RCV-JOBWTIME PARAMETER IS INVALID

Description:: There is an error in the defined RCV-JOBWTIME parameter card.
Measures:: Check if the parameter is specified as a value from "1" to "1440".

* XRPRMSET * RCV-CHRSET PARAMETER IS INVALID

Description:: There is an error in the defined RCV-CHRSET parameter card.
Measures:: Check if the parameter is specified as either "0" or "S".

* XRPRMSET * RCV-TIMEOUT PARAMETER IS INVALID

Description:: There is an error in the defined RCV-TIMEOUT parameter card.
Measures:: Check if the parameter is specified as a value from "10" to "259200".

* XRPRMSET * APT-APPLNM PARAMETER IS INVALID

Description:: There is an error in the defined APT-APPLNM parameter card.
Measures:: Check if an alphanumeric value of 8 characters or less has been specified.

* XRPRMSET * APT-MAXCON PARAMETER IS INVALID

Description:: There is an error in the defined APT-MAXCON parameter card.
Measures:: Check if the parameter is specified as a value from '1' to '100.'

* XRPRMSET * APT-TIMEOUT PARAMETER IS INVALID

Description:: There is an error in the defined APT-TIMEOUT parameter card.
Measures:: Check if the parameter is specified as a value from "10" to "259200".

* XRPRMSET * ALLOWSNDREQ PARAMETER IS INVALID

Description:: There is an error in the defined ALLOWSNDREQ parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * ALLOWPOSTRJOBRSLT PARAMETER IS INVALID

Description:: There is an error in the defined ALLOWPOSTRJOBRSLT parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * ALLOWJOBRSLTNTFY PARAMETER IS INVALID

Description:: There is an error in the defined ALLOWJOBRSLTNTFY parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * ALLOWRMTJOBEXE PARAMETER IS INVALID

Description:: There is an error in the defined ALLOWRMTJOBEXE parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * ALLOWINSTTRANS PARAMETER IS INVALID

Description:: There is an error in the defined ALLOWINSTTRANS parameter card.
Measures:: Check if the parameter is specified as either 'Y' or 'N.'

* XRPRMSET * INSTTRANSCODCNV PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSCODCNV parameter card.
Measures:: Check if the parameter is specified as either "S" or "R".

* XRPRMSET * INSTTRANSEBCDIC PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSEBCDIC parameter card.
Measures:: Check if the parameter is specified as "0", "A", "B", "C", "D", "E", "F", "G", "H", "V", "W", or "X".

* XRPRMSET * INSTTRANSRCVUNIT PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSRCVUNIT parameter card.
Measures:: Check if the UNIT name that has been specified is 8 characters or less.

* XRPRMSET * INSTTRANSRCVSPACE PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSRCVSPACE parameter card.
Measures:: Check if the parameter is specified as the correct value.

* XRPRMSET * INSTTRANSRCVDCB PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSRCVDCB parameter card.
Measures:: Check if the parameter is specified as the correct value.

* XRPRMSET * INSTTRANSMFRCVORG PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSMFRCVORG parameter card.
Measures:: Check if the parameter is specified as either "S" or "R".

* XRPRMSET * INSTTRANSCMDQUE PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSCMDQUE parameter card.
Measures:: Check if the parameter is specified as the correct data set name.

* XRPRMSET * CONSOLELOG PARAMETER IS INVALID

Description:: There is an error in the defined CONSOLELOG parameter card.
Measures:: Check if the parameter is specified as "000", "001", "010", "011", "100", "101", "110", or "111".

* XRPRMSET * CONS-MSGFILTER PARAMETER IS INVALID

Description:: There is an error in the defined CONS-MSGFILTER parameter card.
Measures:: Check if the parameter is specified as the correct data set name.

* XRPRMSET * CONTROL-FILE PARAMETER IS INVALID

Description:: There is an error in the defined CONTROL-FILE parameter card.
Measures:: Check if the parameter is specified as the correct data set name.

* XRPRMSET * INSTTRANSDSNLST PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSDSNLST parameter card.
Measures:: Check if the parameter is specified as the correct data set name.

* XRPRMSET * INSTTRANSVOLLST PARAMETER IS INVALID

Description:: There is an error in the defined INSTTRANSVOLLST parameter card.
Measures:: Check if the parameter is specified as the correct data set name.

* XRPRMSET * STRONGKEYMODE PARAMETER IS INVALID

Description:: There is an error in the defined STRONGKEYMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'

* XRPRMSET * CODE-CONVERSION-LOCATION PARAMETER IS INVALID

Description:: There is an error in the defined CODE-CONVERSION-LOCATION parameter card.
Measures:: Check whether "ANY", "64", or "31" is specified as a parameter.

* XRPRMSET * SYSFILEOUTPUTMODE PARAMETER IS INVALID

Description:: There is an error in the defined SYSFILEOUTPUTMODE parameter card.
Measures:: Check if the parameter is specified as either '0' or '1.'