Management Information Batch Registration messages
*XRSYSINF* **TRANSFER MANAGEMENT FILE ACCESS ERROR IS DETECTED RC=code FDBK=fdbk**
- code:
-
Status code
- fdbk:
-
Detail code of the VSAM macro
- Description:
-
Failed to access the Send Management Information file, the Receive Management Information file, or the Host Information file (HULFT.HOST).
- Measures:
-
A failure has occurred in the Send Management Information file, the Receive Management Information file, or the Host Information file (HULFT.HOST). Refer to the VSAM detail code and take the appropriate measures.
*XRDFA * **TRANSFER MANAGEMENT FILE ACCESS ERROR IS DETECTED RC=code FDBK=fdbk**
- code:
-
Status code
- fdbk:
-
Detail code of the VSAM macro
- Description:
-
Failed to open the Send Management Information file, the Receive Management Information file, or the Host Information file (HULFT.HOST).
- Measures:
-
A failure has occurred in the Send Management Information file, the Receive Management Information file, or the Host Information file (HULFT.HOST). Refer to the VSAM detail code and take the appropriate measures.
*XRSYSINF * **PARA UNDEFINE**
- Description:
-
This is an execution parameter error.
- Measures:
-
Correctly specify the execution parameter, and try again.
*XRSYSINF * CARD-NO:nn **PARAMETER CARD UNDEFINE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Failed to read the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRSYSINF* **PARAMETER CARD ERROR**
- Description:
-
There is an error on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRSYSINF* CARD-NO:nn **ID ALL SPACE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The ID defined on the definition card is blank.
- Measures:
-
Correctly define the definition card, and try again.
*XRSYSINF* ** ID FAILED ID=id
- id:
-
Definition card ID
- Description:
-
The defined ID on the definition card is invalid.
- Measures:
-
Correctly define the definition card, and try again.
*XRBSNDSB * **BLOCKLEN ERR**
- Description:
-
The specified Transfer Block Length and Transfer Block Count exceed the threshold values.
- Measures:
-
Specify values for the Transfer Block Length and the Transfer Block Count the product of which does not exceed 65520.
*XRBSNDSB * **BLOCKLEN OR BLOCKNUM ERROR**
- Description:
-
You cannot set '0' for only the Transfer Block Length or only the Transfer Block Count.
- Measures:
-
Either specify both the Transfer Block Length and the Transfer Block Count as '0,' or set another value.
*XRBSNDSB * **DBID ERR**
- Description:
-
The Interface DBID is invalid. You can specify only 'CSV' for the Interface DBID. In addition, you can specify the Interface DBID only when the Transfer Type is 'F' or 'M.'
- Measures:
-
Specify the correct Interface DBID, specify 'F' or 'M' for the Transfer Type, and try again.
*XRBSNDSB * **DSNAME NOTHING**
- Description:
-
The Send Dataset Name is not specified.
- Measures:
-
Correctly specify the Send Dataset Name, and try again.
*XRBSNDSB * **GRPID NOTHING**
- Description:
-
The Transfer Group ID is not specified.
- Measures:
-
Specify the Transfer Group ID and try again.
*XRBSNDSB * **FMTID NOTHING**
- Description:
-
The Format ID is not specified, though 'F' is specified for the Transfer Type.
- Measures:
-
Specify the Format ID and try again.
*XRBSNDSB * **MULTI FMTID NOTHING**
- Description:
-
The Multi Format ID is not specified, though 'M' is specified for the Transfer Type.
- Measures:
-
Specify the Multi Format ID and try again.
*XRBSNDSB * **UNIT-CNT OR WORK-VOL ERR**
- Description:
-
The Work Volume Serial is specified, though a value greater than '1' is specified for the UNIT Quantity.
- Measures:
-
Either set the UNIT Quantity to '1' or omit the Work Volume Serial, and try again.
*XRBSNDSB * **NORMAL END** FILE-ID:fileid
- fileid:
-
Send File ID
- Description:
-
Registration of the Send File ID ended successfully.
*XRBSNDSB * CARD-NO:nn **SNDFILE SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Send Management Information.
- Measures:
-
Specify the correct syntax, and try again.
*XRBSNDSB * **ALREADY EXIST** FILE-ID:fileid
- fileid:
-
Send File ID
- Description:
-
The specified Send File ID is already registered.
- Measures:
-
Specify a different File ID, or specify for the registered information to be overwritten, and try again.
*XRBSNDSB * **PAD TRANSTYPE ERROR**
- Description:
-
The Subsequent Character is specified incorrectly when a string other than 'TEXT' is specified for the Transfer Type.
- Measures:
-
Either specify 'TEXT' for the Transfer Type or specify 'N' for the Subsequent Character, and try again.
*XRBSNDSB * PAD:pad **PAD NOT = N ERROR**
- pad:
-
Subsequent Character
- Description:
-
A character other than 'N' is specified for the Subsequent Character when a string other than 'TEXT' is specified for the Transfer Type.
- Measures:
-
Either specify 'TEXT' for the Transfer Type or specify 'N' for the Subsequent Character, and try again.
*XRBSNDSB * TRANSTYPE:trans **TRANSTYPE NOT = TEXT ERROR**
- trans:
-
Transfer Type
- Description:
-
A string other than 'TEXT' is specified for the Transfer Type when a character other than 'N' is specified for the Subsequent Character.
- Measures:
-
Either specify 'TEXT' for the Transfer Type or specify 'N' for the Subsequent Character, and try again.
*XRBSNDSB * **UNIT ERROR**
- Description:
-
The specification for the Unit Name is invalid.
- Measures:
-
Correctly specify the unit name, and try again.
*XRBSNDSB * **UNDEFINE** GRPID:id
- id:
-
Transfer Group ID
- Description:
-
The Transfer Group ID is not registered.
- Measures:
-
After registering the Transfer Group ID, try again.
*XRBSNDSB * **UNDEFINE** FMTID:id
- id:
-
Format ID
- Description:
-
The Format ID is not registered.
- Measures:
-
After registering the Format ID, try again.
*XRBSNDSB * **UNDEFINE** MFMTID:id
- id:
-
Multi Format ID
- Description:
-
The Multi Format ID is not registered.
- Measures:
-
After registering the Multi Format ID, try again.
*XRBSNDSB * CARD-NO:nn **VOL,CYL,TRK ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the volume serial number and the work file capacity are invalid.
- Measures:
-
Specify the correct syntax, and try again.
*XRBSNDSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The parameter defined on the definition card is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBSNDSB * CARD-NO:nn **ITEM ALL SPACE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
A space is specified in the parameter.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBSNDSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **DSNAME DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Send file name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **DSNAME SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Send file name is invalid.
- Measures:
-
Correctly specify the Send file name, and try again.
*XRBSNDSB * CARD-NO:nn **VOL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Volume Serial.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **VOL SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Volume Serial is invalid.
- Measures:
-
Correctly specify the volume serial number, and try again.
*XRBSNDSB * CARD-NO:nn **VOL UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The length of the specified Volume Serial is shorter than the required length.
- Measures:
-
Specify the volume serial number of 1 to 6 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **VOL OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Volume Serial is outside the valid range.
- Measures:
-
Specify the volume serial number of 1 to 6 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **CYL,TRK DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the work file capacity.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **CYL,TRK SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the work file capacity is invalid.
- Measures:
-
Correctly specify the work file capacity, and try again.
*XRBSNDSB * CARD-NO:nn **CYL,TRK UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified work file capacity is lower than the required value.
- Measures:
-
Correctly specify the work file capacity, and try again.
*XRBSNDSB * CARD-NO:nn **INTERVAL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Interval.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **INTERVAL OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Interval is outside the valid range.
- Measures:
-
Specify the Transfer Interval in 1 to 5 bytes as a value from '0' to '32768,' and try again.
*XRBSNDSB * CARD-NO:nn **INTERVAL NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Transfer Interval does not consist of numbers.
- Measures:
-
Specify the Transfer Interval as a value from '0' to '32768,' and try again.
*XRBSNDSB * CARD-NO:nn **INTERVAL OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Interval is outside the valid range.
- Measures:
-
Specify the Transfer Interval as a value from '0' to '32768,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKLEN DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Block Length.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKLEN OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Block Length is outside the valid range.
- Measures:
-
Specify the Transfer Block Length in 1 to 5 bytes as '0' or a value from '128' to '65520,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKLEN NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Transfer Block Length does not consist of numbers.
- Measures:
-
Specify the Transfer Block Length as '0' or a value from '128' to '65520,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKLEN OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Block Length is outside the valid range.
- Measures:
-
Specify the Transfer Block Length as '0' or a value from '128' to '65520,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKNUM DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Block Count.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKNUM OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Block Count is outside the valid range.
- Measures:
-
Specify the Transfer Block Count in 1 to 2 bytes as a value from '0' to '99,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKNUM NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Transfer Block Count does not consist of numbers.
- Measures:
-
Specify the Transfer Block Count as a value from '0' to '99,' and try again.
*XRBSNDSB * CARD-NO:nn **BLOCKNUM OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Block Count is outside the valid range.
- Measures:
-
Specify the Transfer Block Count as a value from '0' to '99,' and try again.
*XRBSNDSB * CARD-NO:nn **COMP DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Compression Preference.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **COMP CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Compression Preference selection is invalid.
- Measures:
-
Specify 'NO,' '1,' or '2' for the Compression Preference and try again.
*XRBSNDSB * CARD-NO:nn **TRANSPRTY DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Priority.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **TRANSPRTY OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Priority is outside the valid range.
- Measures:
-
Specify the Transfer Priority in 1 to 3 bytes as a value from '1' to '256,' and try again.
*XRBSNDSB * CARD-NO:nn **TRANSPRTY NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Transfer Priority does not consist of numbers.
- Measures:
-
Specify the Transfer Priority as a value from '1' to '256,' and try again.
*XRBSNDSB * CARD-NO:nn **TRANSPRTY OVER RANGE**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Priority is outside the valid range.
- Measures:
-
Specify the Transfer Priority as a value from '1' to '256,' and try again.
*XRBSNDSB * CARD-NO:nn **TRANSTYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Type.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **TRANSTYPE CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Transfer Type selection is invalid.
- Measures:
-
Specify either 'FORMAT,' 'BINARY,' 'TEXT,' or 'MFORMAT' for the Transfer Type, and try again.
*XRBSNDSB * CARD-NO:nn **CODE-CONV DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Code Conversion.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **CODE-CONV CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Code Conversion selection is invalid.
- Measures:
-
Specify 'SND,' 'RCV,' or 'NOC' for the Code Conversion, and try again.
*XRBSNDSB * CARD-NO:nn **JOBID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Successful Job ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **JOBID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Successful Job ID is outside the valid range.
- Measures:
-
Specify the Successful Job ID in 1 to 50 bytes and try again.
*XRBSNDSB * CARD-NO:nn **AB-JOBID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Unsuccessful Job ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **AB-JOBID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Unsuccessful Job ID is outside the valid range.
- Measures:
-
Specify the Unsuccessful Job ID in 1 to 50 bytes and try again.
*XRBSNDSB * CARD-NO:nn **PRE-JOB DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Pre-send Job ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **PRE-JOB OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Pre-send Job ID is outside the valid range.
- Measures:
-
Specify the Pre-send Job ID in 1 to 50 bytes and try again.
*XRBSNDSB * CARD-NO:nn **GRPID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Group ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **GRPID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Group ID is outside the valid range.
- Measures:
-
Specify the Transfer Group ID in 1 to 50 bytes and try again.
*XRBSNDSB * CARD-NO:nn **FMTID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Format ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **FMTID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Format ID is outside the valid range.
- Measures:
-
Specify the Format ID in 1 to 50 bytes and try again.
*XRBSNDSB * CARD-NO:nn **DBID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Interface DBID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **DBID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Interface DBID is outside the valid range.
- Measures:
-
Specify the Interface DBID in 1 to 8 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **WORK-VOL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Work Volume Serial.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **WORK-VOL OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Work Volume Serial is outside the valid range.
- Measures:
-
Specify the Work Volume Serial in 1 to 6 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **CLEAR DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Send File Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **CLEAR CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The selected Send File Mode is invalid.
- Measures:
-
Specify 'KEEP,' 'CLEAR,' 'DELETE,' or 'LOCK' for the Send File Mode, and try again.
*XRBSNDSB * CARD-NO:nn **DIRECT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **DIRECT CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Transfer Mode selection is invalid.
- Measures:
-
Specify either 'NO' or 'YES' for the Transfer Mode and try again.
*XRBSNDSB * CARD-NO:nn **UNIT-CNT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the UNIT Quantity.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **UNIT-CNT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the UNIT Quantity is outside the valid range.
- Measures:
-
Specify the UNIT Quantity in 1 to 2 bytes as a value from '1' to '59,' and try again.
*XRBSNDSB * CARD-NO:nn **UNIT-CNT NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified UNIT Quantity does not consist of numbers.
- Measures:
-
Specify the UNIT Quantity as a value from '1' to '59' and try again.
*XRBSNDSB * CARD-NO:nn **UNIT-CNT OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the UNIT Quantity is outside the valid range.
- Measures:
-
Specify the UNIT Quantity as a value from '1' to '59' and try again.
*XRBSNDSB * CARD-NO:nn **PASSWORD DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Cipher Key.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **PASSWORD OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Cipher Key is outside the valid range.
- Measures:
-
Specify the Cipher Key in 8 to 20 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **PASSWORD UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Cipher Key is too short.
- Measures:
-
Specify the Cipher Key in 8 to 20 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **CODESET DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the EBCDIC Code Set.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **CODESET CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The EBCDIC Code Set selection is invalid.
- Measures:
-
Specify '0,' 'A,' 'B,' 'C,' 'D,' 'E,' 'F,' 'G,' 'H,' 'V,' 'W,' or 'X' for the EBCDIC Code Set, and try again.
*XRBSNDSB * CARD-NO:nn **SHIFT-CODE DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Shiftcode Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **SHIFTCODE CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Shiftcode Mode selection is invalid.
- Measures:
-
Specify 'S,' 'C,' 'Y,' or 'N' for the Shiftcode Mode, and try again.
*XRBSNDSB * CARD-NO:nn **PAD DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Subsequent Character.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **PAD CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Subsequent Character selection is invalid.
- Measures:
-
Specify '0,' 'A,' 'S,' or 'N' for the Subsequent Character and try again.
*XRBSNDSB * CARD-NO:nn **UNIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the UNIT Name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **VSEQNO DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Sequence Number.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **VSEQNO NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Sequence Number does not consist of numbers.
- Measures:
-
Specify the Sequence Number as a value from '1' to '9999' and try again.
*XRBSNDSB * CARD-NO:nn **VSEQNO OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Sequence Number is outside the valid range.
- Measures:
-
Specify the Sequence Number in 1 to 4 bytes as a value from '1' to '9999,' and try again.
*XRBSNDSB * CARD-NO:nn **COMMENT SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is invalid.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBSNDSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBSNDSB * CARD-NO:nn **PAUSE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for for the Send file name parameter is invalid.
- Measures:
-
Correctly specify the Send file name, and try again.
*XRBSNDSB * CARD-NO:nn **DSNAME UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The length of the specified Send file name is shorter than the required length.
- Measures:
-
Specify the Send file name in 1 to 44 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **DSNAME OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Send file name is outside the valid range.
- Measures:
-
Specify the Send file name in 1 to 44 bytes, and try again.
*XRBSNDSB * CARD-NO:nn **WRITE NEXT CARD **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many parameters are specified.
- Measures:
-
Check the specified parameters, and try again.
*XRBSNDSB * CARD-NO:nn **VOL NAME SCRTCH ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify 'SCRTCH' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBSNDSB * CARD-NO:nn **VOL NAME PRIVAT ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify 'PRIVAT' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBSNDSB * CARD-NO:nn **VOL NAME L99999 ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify from 'L00001' to 'L99999' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBSNDSB * CARD-NO:nn **CYL,TRK PAUSE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The delimiter is invalid for the specified work file capacity.
- Measures:
-
Specify the work file capacity using the format CYL=(9999,9999), and try again.
*XRBSNDSB * CARD-NO:nn **PRIMARY NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent does not consist of numbers.
- Measures:
-
Specify the 1ST Extent as a value from '1' to '9999' and try again.
*XRBSNDSB * CARD-NO:nn **PRIMARY OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent is outside the valid range.
- Measures:
-
Specify the 1ST Extent in 1 to 4 bytes as a value from '1' to '9999,' and try again.
*XRBSNDSB * CARD-NO:nn **SECONDARY ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent is invalid.
- Measures:
-
Specify the work file capacity using the format CYL=(9999,9999), and try again.
*XRBSNDSB * CARD-NO:nn **SECONDARY NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent does not consist of numbers.
- Measures:
-
Specify the Secondary extent as a value from '0' to '9999' and try again.
*XRBSNDSB * CARD-NO:nn **SECONDARY OVER RANGE**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent is outside the valid range.
- Measures:
-
Specify the Secondary extent in 1 to 4 bytes as a value from '0' to '9999,' and try again.
*XRBSNDSB * CARD-NO:nn **SECONDARY ONLY ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The 1ST Extent is not specified.
- Measures:
-
Specify the work file capacity using the format CYL=(9999,9999), and try again.
*XRBSNDSB * CARD-NO:nn **PRIMARY ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent is invalid.
- Measures:
-
Specify the work file capacity using the format CYL=(9999,9999), and try again.
*XRBSNDSB * CARD-NO:nn **OMIT ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The work file capacity is specified, though the capacity is set to be omitted.
- Measures:
-
Do not specify the work file capacity if it is set to be omitted, and try again.
*XRBSNDSB * CARD-NO:nn **SND-RDW DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Sending with RDW.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBSNDSB * CARD-NO:nn **SND-RDW CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Sending with RDW selection is invalid.
- Measures:
-
Specify either 'Y' or 'N' for the Sending with RDW and try again.
*XRBSNDSB * **SND-RDW TRANSTYPE ERR**
- Description:
-
The Transfer Type is invalid when you specify the Sending with RDW.
- Measures:
-
Either specify BINARY for the Transfer Type or specify 'N' for the Sending with RDW, and try again.
*XRBSNDSB * **BLOCKLEN CONVERTED TO '128'**
- Description:
-
The value '128' has been used as the Block Size. Processing will continue.
*XRBSNDSB * CARD-NO:nn ** PASSWORD IS NOT ALLOWED **
- nn:
-
Number of the card where the error occurred
- Description:
-
The cipher option is invalid.
The specified tag is invalid for a version of HULFT that does not support encryption.
*XRBSNDSB * CARD-NO:nn **FILEID _INSTANT_TRANSFER_ IS UNAVAILABLE FOR INSTANT TRANSFER
- nn:
-
Number of the card where the error occurred
- Description:
-
Cannot register the Send Management Information because the file ID "_INSTANT_TRANSFER_" is a system-reserved word.
- Measures:
-
Specify a send file ID name that is not a system-reserved word, and try again.
*XRBSNDSB * **CIPHER KEY CANNOT BE OMITTED**
- Description:
-
A cipher key is not specified.
- Measures:
-
Specify a 64 byte cipher key and try again.
*XRBSNDSB * CARD-NO:nn **PASSWORD ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The cipher key is invalid.
- Measures:
-
Enter the correct cipher key and try again.
*XRBSNDSB * CARD-NO:nn **SPECIFY CIPHER KEY OF 64 BYTES**
- nn:
-
Number of the card where the error occurred
- Description:
-
The length of the cypher key is not 64 bytes.
- Measures:
-
Specify a 64 byte cipher key and try again.
*XRBRCVSB * **MFRCVORG=S CAN NOT OMISSION ERR**
**RECFM,LRECL,BLOCKLEN,CYL,TRK**
- Description:
-
'S' is specified for the Use Attribute, and the specification is invalid.
- Measures:
-
If you specify 'S' for the Use Attribute, either omit or specify values for all of the following: the Record Format, the Record Length, the Block Size, the 1ST Extent, and the Secondary.
*XRBRCVSB * **DSNAME NOTHING**
- Description:
-
The Receive Dataset Name is not specified.
- Measures:
-
Correctly specify the Receive Dataset Name, and try again.
*XRBRCVSB * **LRECL NOTHING**
- Description:
-
The Record Length is not specified.
- Measures:
-
Specify the Record Length and try again.
*XRBRCVSB * **RECFM NOTHING**
- Description:
-
The Record Format is not specified.
- Measures:
-
Specify the Record Format and try again.
*XRBRCVSB * **TRANSMODE NOTHING**
- Description:
-
The Registration Mode is not specified.
- Measures:
-
Specify the Registration Mode and try again.
*XRBRCVSB * **ABNORMAL NOTHING**
- Description:
-
The Error Handling is not specified.
- Measures:
-
Specify the Error Handling and try again.
*XRBRCVSB * **RCVTYPE NOTHING**
- Description:
-
The Receive Mode is not specified.
- Measures:
-
Specify the Receive Mode and try again.
*XRBRCVSB * **BLKSIZE ERR**
- Description:
-
The specification for the Block Size is invalid.
- Measures:
-
Correctly specify the Block Size, and try again.
*XRBRCVSB * **LRECL ERR**
- Description:
-
The specification for the Record Length is invalid.
- Measures:
-
Correctly specify the Record Length and try again.
*XRBRCVSB * **JOBID NOTHING**
- Description:
-
The Successful Job ID is not specified, though 'M' is specified for the Receive Mode.
- Measures:
-
Specify the Successful Job ID, and try again.
*XRBRCVSB * **CATALOG ERROR **
- Description:
-
'C' is specified for the Catalog Operation for the Receive file when 'M' is specified for the Receive Mode.
- Measures:
-
Specify 'N' for the Catalog Operation for the Receive file, and try again.
*XRBRCVSB * **DSNAME ERROR **
- Description:
-
A variable is specified for the Receive Dataset Name when 'M' is specified for the Receive Mode.
- Measures:
-
Remove the variable from the Receive Dataset Name, and try again.
*XRBRCVSB * **WORK-VOL ERROR **
- Description:
-
The Work Volume Serial is specified when 'S' is specified for the Receive Mode.
- Measures:
-
Omit the work volume serial number, and try again.
*XRBRCVSB * ** TRANSMODE ERROR **
- Description:
-
A string other than 'NEW' is specified for the Registration Mode when 'Y' is specified for the Catalog Operation for the Receive file.
- Measures:
-
Specify 'NEW' for the Registration Mode and try again.
*XRBRCVSB * ** RCVTYPE ERROR **
- Description:
-
'M' is specified for the Receive Mode when 'Y' is specified for the Catalog Operation for the Receive file.
- Measures:
-
Specify 'S' for the Receive Mode and try again.
*XRBRCVSB * ** WORK-VOL CAN NOT OMISSION **
- Description:
-
The Volume Serial cannot be omitted when 'N' is specified for the Registration Mode.
- Measures:
-
Specify the volume serial number, and try again.
*XRBRCVSB * **NORMAL END** FILE-ID:fileid
- fileid:
-
Receive File ID
- Description:
-
Registration of the Receive file ID ended successfully.
*XRBRCVSB * CARD-NO:nn **RCVFILE SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Receive file name is invalid.
- Measures:
-
Correctly specify the Receive Dataset Name, and try again.
*XRBRCVSB * **ALREADY EXIST** FILE-ID:fileid
- fileid:
-
Receive File ID
- Description:
-
The specified Receive File ID is already registered.
- Measures:
-
Specify a different File ID, or specify for the registered information to be overwritten, and try again.
*XRBRCVSB * CARD-NO:nn **RCVEND-NOTICE DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receive Completion Notification.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **RCVEND-NOTICE CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Receive Completion Notification selection is invalid.
- Measures:
-
Correctly specify the Receive Completion Notification, and try again.
*XRBRCVSB * **VOL-TYPE ERROR**
- Description:
-
The specification for the Multivolume is invalid.
- Measures:
-
Correctly specify the Multivolume, and try again.
*XRBRCVSB * **RESTORE IS NOT SPECIFIED FOR MULTI VOLUME RECEIVING**
- Description:
-
You cannot specify 'R' for the Error Handling when 'M' is specified for the Multivolume.
- Measures:
-
Specify 'R' for the Error Handling and try again.
*XRBRCVSB * **MULTIPLE HOST IS NOT SPECIFIED FOR MULTI VOLUME RECEIVING**
- Description:
-
You cannot specify 'M' for the Multivolume when 'M' is specified for the Receive Mode.
- Measures:
-
Specify 'S' for the Receive Mode and try again.
*XRBRCVSB * **VOLUME IS NOT SPECIFIED FOR MULTI VOLUME RECEIVING**
- Description:
-
You cannot specify the Volume Serial when 'M' is specified for the Multivolume.
- Measures:
-
Omit the volume serial number, and try again.
*XRBRCVSB * **MFRCVORG ERROR**
- Description:
-
The specification for the Use Attribute is invalid.
- Measures:
-
Specify 'S' or 'R' for the Use Attribute and try again.
*XRBRCVSB * **PRINT-CNTL ERROR**
- Description:
-
The specification for the Print Character is invalid.
- Measures:
-
Specify 'A,' 'M,' or 'NO' for the Print Character and try again.
*XRBRCVSB * **UNIT ERROR**
- Description:
-
The specification for the Unit Name is invalid.
- Measures:
-
Correctly specify the unit name, and try again.
*XRBRCVSB * **WORK-VOL ERROR**
- Description:
-
The specification for the Work Volume Serial is invalid.
- Measures:
-
Correctly specify the work volume serial number, and try again.
*XRBRCVSB * CARD-NO:nn **VOL,CYL,TRK ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The parameter following the Receive file name is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBRCVSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified parameter is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBRCVSB * CARD-NO:nn **ITEM ALL SPACE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
A space has been specified as the value for the parameter.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBRCVSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **DSNAME DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receive file name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **DSNAME SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file name is invalid.
- Measures:
-
Correctly specify the Receive file name, and try again.
*XRBRCVSB * CARD-NO:nn **VOL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Volume Serial.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **VOL SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Volume Serial is invalid.
- Measures:
-
Correctly specify the volume serial number, and try again.
*XRBRCVSB * CARD-NO:nn **VOL OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Volume Serial is outside the valid range.
- Measures:
-
Specify the volume serial number of 1 to 6 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **VOL UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Volume Serial is too short.
- Measures:
-
Specify the volume serial number of 1 to 6 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **CYL,TRK DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receive file capacity.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **CYL,TRK UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file capacity is too short.
- Measures:
-
Specify the Receive file capacity as a value from '1' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **CYL,TRK SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file capacity is invalid.
- Measures:
-
Correctly specify the Receive file capacity, and try again.
*XRBRCVSB * CARD-NO:nn **CYL,TRK ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file capacity is too short.
- Measures:
-
Specify the Receive file capacity as a value from '1' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **CYL,TRK PAUSE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file capacity is invalid.
- Measures:
-
Specify the Receive file capacity using the format CYL=(9999,9999), and try again.
*XRBRCVSB * CARD-NO:nn **PRIMARY ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent is invalid.
- Measures:
-
Specify the Receive file capacity using the format CYL=(9999,9999), and try again.
*XRBRCVSB * CARD-NO:nn **PRIMARY NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent does not consist of numbers.
- Measures:
-
Specify the 1ST Extent as a value from '1' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **PRIMARY OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the 1ST Extent is outside the valid range.
- Measures:
-
Specify the 1ST Extent in 1 to 4 bytes as a value from '1' to '9999,' and try again.
*XRBRCVSB * CARD-NO:nn **SECONDARY ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent is invalid.
- Measures:
-
Specify the Receive file capacity using the format CYL=(9999,9999), and try again.
*XRBRCVSB * CARD-NO:nn **SECONDARY NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent does not consist of numbers.
- Measures:
-
Specify the Secondary extent as a value from '0' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **SECONDARY OVER RANGE**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Secondary extent is outside the valid range.
- Measures:
-
Specify the Secondary extent in 1 to 4 bytes as a value from '0' to '9999,' and try again.
*XRBRCVSB * CARD-NO:nn **RECFM DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Record Format.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **RECFM CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Record Format is invalid.
- Measures:
-
Specify either 'F' or 'V' for the Record Format and try again.
*XRBRCVSB * CARD-NO:nn **RECFM,LRECL ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The combination of the Record Format and the Record Length is invalid.
- Measures:
-
When 'F' is specified for the Record Format, specify a value between '1' and '32760' for the Record Length. When 'V' is specified for the Record Format, specify a value between '5' and '32756' for the Record Length. Then, execute the procedure again.
*XRBRCVSB * CARD-NO:nn **LRECL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Record Length.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **LRECL OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Record Length is outside the valid range.
- Measures:
-
Specify the Record Length in 1 to 5 bytes as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **LRECL NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Record Length does not consist of numbers.
- Measures:
-
Specify the Record Length as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **LRECL OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Record Length is outside the valid range.
- Measures:
-
Specify the Record Length as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **BLOCKLEN DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Block Size.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **BLOCKLEN OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Block Size is outside the valid range.
- Measures:
-
Specify the Block Size as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **BLOCKLEN NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Block Size does not consist of numbers.
- Measures:
-
Specify the Block Size as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **BLOCKLEN OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Block Size is outside the valid range.
- Measures:
-
Specify the Block Size as a value from '1' to '32760,' and try again.
*XRBRCVSB * CARD-NO:nn **TRANSMODE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Registration Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **TRANSMODE CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Registration Mode is invalid.
- Measures:
-
Specify 'NEW,' 'REP,' or 'MOD' for the Registration Mode and try again.
*XRBRCVSB * CARD-NO:nn **ABNORMAL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Error Handling.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **ABNORMAL CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Error Handling is invalid.
- Measures:
-
Specify 'KEEP,' 'DELETE,' or 'RESTORE' for the Error Handling and try again.
*XRBRCVSB * CARD-NO:nn **RCVTYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receive Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **RCVTYPE CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive Mode is invalid.
- Measures:
-
Specify either 'S' or 'M' for the Receive Mode and try again.
*XRBRCVSB * CARD-NO:nn **CATALOG DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Catalog Operation for the Receive file.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **CATALOG CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Catalog Operation for the Receive file is invalid.
- Measures:
-
Specify 'Y,' 'N,' or 'C' for the Catalog Operation for the Receive file, and try again.
*XRBRCVSB * CARD-NO:nn **JOBID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Successful Job ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **JOBID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Successful Job ID is outside the valid range.
- Measures:
-
Specify the Successful Job ID within 50 bytes and try again.
*XRBRCVSB * CARD-NO:nn **AB-JOBID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Unsuccessful Job ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **AB-JOBID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Unsuccessful Job ID is outside the valid range.
- Measures:
-
Specify the Unsuccessful Job ID within 50 bytes and try again.
*XRBRCVSB * CARD-NO:nn **GRPID DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Transfer Group ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **GRPID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Group ID is outside the valid range.
- Measures:
-
Specify the Transfer Group ID within 50 bytes and try again.
*XRBRCVSB * CARD-NO:nn **GRPID NOTHING **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Transfer Group ID is not registered.
- Measures:
-
Register a Transfer Group ID and try again.
*XRBRCVSB * CARD-NO:nn **FMTID OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Format ID is outside the valid range.
- Measures:
-
Specify the Format ID within 50 bytes and try again.
*XRBRCVSB * CARD-NO:nn **PASSWORD DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Cipher Key.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **PASSWORD OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Cipher Key is outside the valid range.
- Measures:
-
Specify the Cipher Key in 8 to 20 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **PASSWORD UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Cipher Key is too short.
- Measures:
-
Specify the Cipher Key in 8 to 20 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **CODESET DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the EBCDIC Code Set.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **CODESET CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the EBCDIC Code Set is invalid.
- Measures:
-
Specify '0,' 'A,' 'B,' 'C,' 'D,' 'E,' 'F,' 'G,' 'H,' 'V,' 'W,' or 'X' for the EBCDIC Code Set, and try again.
*XRBRCVSB * CARD-NO:nn **VOL-TYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Multivolume.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **MFRCVORG DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Use Attribute.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **PRINT-CNTL DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Print Character.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **UNIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the UNIT Name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **VSEQNO DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Sequence Number.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **VSEQNO NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Sequence Number does not consist of numbers.
- Measures:
-
Specify the Sequence Number as a value from '1' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **VSEQNO OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Sequence Number is outside the valid range.
- Measures:
-
Specify the Sequence Number as a value from '1' to '9999' and try again.
*XRBRCVSB * CARD-NO:nn **WORK-VOL DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Work Volume Serial.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **COMMENT SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is invalid.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBRCVSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBRCVSB * CARD-NO:nn **PAUSE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The syntax for the dataset name, the volume serial number, and the Receive file capacity is invalid.
- Measures:
-
Correctly specify the dataset name, the volume serial number, and the Receive file capacity, and try again.
*XRBRCVSB * CARD-NO:nn **DSNAME OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified Receive file name is outside the valid range.
- Measures:
-
Specify the Receive file name in 1 to 44 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **DSNAME UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive file name is too short.
- Measures:
-
Specify the Receive file name in 1 to 44 bytes, and try again.
*XRBRCVSB * CARD-NO:nn **DSNAME CHECK ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Receive file name does not comply with the naming conventions.
- Measures:
-
Correctly specify the Receive file name, and try again.
*XRBRCVSB * CARD-NO:nn **&SNDFILE BACK WORD **
- nn:
-
Number of the card where the error occurred
- Description:
-
When you specify &SNDFILE for the Receive file name, you cannot specify a character string after &SNDFILE.
- Measures:
-
Delete the character string after &SNDFILE, and try again.
*XRBRCVSB * CARD-NO:nn **WRITE NEXT CARD **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification as CYL or TRK is invalid.
- Measures:
-
Specify the Receive file capacity using the format CYL=(9999,9999), and try again.
*XRBRCVSB * CARD-NO:nn **VOL NAME SCRTCH ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify 'SCRTCH' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBRCVSB * CARD-NO:nn **VOL NAME PRIVAT ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify 'PRIVAT' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBRCVSB * CARD-NO:nn **VOL NAME L99999 ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify from 'L00001' to 'L99999' for the volume serial number.
- Measures:
-
Specify the volume serial number in alphanumeric characters, excluding system-reserved words, and try again.
*XRBRCVSB * CARD-NO:nn **STORCLAS DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Storage Class.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **MGMTCLAS DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Management Class.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **DATACLAS DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Data Class.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * **STORCLAS ERROR**
- Description:
-
The specification for the Storage Class is invalid.
- Measures:
-
Correctly specify the Storage Class, and try again.
*XRBRCVSB * **MGMTCLAS ERROR**
- Description:
-
The specification for the Management Class is invalid.
- Measures:
-
Correctly specify the Management Class, and try again.
*XRBRCVSB * **DATACLAS ERROR**
- Description:
-
The specification for the Data Class is invalid.
- Measures:
-
Correctly specify the Data Class, and try again.
*XRBRCVSB * CARD-NO:nn **RCV-RDW DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receiving with RDW.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **RCV-RDW CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Receiving with RDW selection is invalid.
- Measures:
-
Specify either 'Y' or 'N' for the Receiving with RDW and try again.
*XRBRCVSB * **RCV-RDW RECFM ERR **
- Description:
-
The Record Format for the Receiving with RDW is invalid.
- Measures:
-
Specify 'V' for the Record Format, omit the Record Format only when the Data Class is specified, or specify 'N' for the Receiving with RDW, and try again.
*XRBRCVSB * **FMTID NOT SUPPORTED**
- Description:
-
Specification of a Format ID is not supported. Specification will be ignored and processing will continue.
*XRBRCVSB * CARD-NO:nn **DATAVERIFY DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Verify Data.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBRCVSB * CARD-NO:nn **DATAVERIFY CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Verify Data selection is invalid.
- Measures:
-
Specify either '0' or '1' for the Verify Data and try again.
*XRBRCVSB * CARD-NO:nn ** PASSWORD IS NOT ALLOWED **
- nn:
-
Number of the card where the error occurred
- Description:
-
The cipher option is invalid.
The specified tag is invalid for a version of HULFT that does not support encryption.
*XRBRCVSB * CARD-NO:nn **RLSE CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The selection for the specification for the release of the unused area is invalid.
- Measures:
-
Specify either 'Y' or 'N' for the release of the unused area and try again.
*XRBRCVSB * CARD-NO:nn **FILEID _INSTANT_TRANSFER_ IS UNAVAILABLE FOR INSTANT TRANSFER **
- nn:
-
Number of the card where the error occurred
- Description:
-
Cannot register the Receive Management Information because the file ID "_INSTANT_TRANSFER_" is a system-reserved word.
- Measures:
-
Specify a receive file ID name that is not a system-reserved word, and try again.
*XRBRCVSB * **CIPHER KEY CANNOT BE OMITTED**
- Description:
-
A cipher key is not specified.
- Measures:
-
Specify a 64 byte cipher key and try again.
*XRBRCVSB * CARD-NO:nn **PASSWORD ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The cipher key is invalid.
- Measures:
-
Enter the correct cipher key and try again.
*XRBRCVSB * CARD-NO:nn **SPECIFY CIPHER KEY OF 64 BYTES**
- nn:
-
Number of the card where the error occurred
- Description:
-
The length of the cypher key is not 64 bytes.
- Measures:
-
Specify a 64 byte cipher key and try again.
*XRBJOBSB * **DSNAME NOTHING**
- Description:
-
The Dataset Name is not specified.
- Measures:
-
Correctly specify the JCL library, and try again.
*XRBJOBSB * **MEMBER NOTHING**
- Description:
-
The member name is not specified.
- Measures:
-
Specify a member name for the job, and try again.
*XRBJOBSB * **MEMBER DEF NOTHING**
- Description:
-
'MEMBER DEF' is not described on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBJOBSB * **DEFEND NOTHING**
- Description:
-
'DEFEND' is not described on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBJOBSB * **NORMAL END** JOB-ID :jobid
- jobid:
-
Job ID
- Description:
-
Registration of the Job ID ended successfully.
*XRBJOBSB * CARD-NO:nn **JOB SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Job Information.
- Measures:
-
Specify the correct syntax, and try again.
*XRBJOBSB * **ALREADY EXIST** JOB-ID:jobid
- jobid:
-
Job ID
- Description:
-
The specified Job ID is already registered.
- Measures:
-
Specify a different Job ID, or specify for the registered information to be overwritten, and try again.
*XRBJOBSB * **MEMBER INFORMATION NOTHING**
- Description:
-
The member name is not specified.
- Measures:
-
Specify a member name for the job, and try again.
*XRBJOBSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The parameter defined on the definition card is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBJOBSB * CARD-NO:nn **SPACE SET ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
A space is specified in the parameter.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBJOBSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBJOBSB * CARD-NO:nn **DSNAME DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Dataset Name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBJOBSB * CARD-NO:nn **COMMENT SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in the specified comment.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBJOBSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBJOBSB * CARD-NO:nn **DSNAME UNDERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Dataset Name is too short.
- Measures:
-
Specify the JCL library name in 1 to 44 bytes, and try again.
*XRBJOBSB * CARD-NO:nn **DSNAME OVERFLOW **
- nn:
-
Number of the card where the error occurred:
- Description:
-
The specification for the Dataset Name is outside the valid range.
- Measures:
-
Specify the JCL library name in 1 to 44 bytes, and try again.
*XRBJOBSB * CARD-NO:nn **MEMBER NOTHING **
- nn:
-
Number of the card where the error occurred
- Description:
-
The member name is not specified.
- Measures:
-
Specify a member name for the job, and try again.
*XRBJOBSB * CARD-NO:nn **MEMBER NAME OVERFLOW**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified member name is outside the valid range.
- Measures:
-
Specify a member name within 8 bytes, and try again.
*XRBJOBSB * CARD-NO:nn **MEMBER MAX 90 OVER **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many member names are specified.
- Measures:
-
Specify up to 90 member names, and try again.
*XRBJOBSB * CARD-NO:nn **MEMBER ALPHA NUM ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified member name does not consist of alphanumeric characters.
- Measures:
-
Specify the member name within 8 bytes in alphanumeric characters, and try again.
*XRBJOBSB * CARD-NO:nn **JOB-RC DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the JOB RC Criterion.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBJOBSB * CARD-NO:nn **JOB-RC OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the JOB RC Criterion is outside the valid range.
- Measures:
-
Specify the JOB RC Criterion in 1 to 4 bytes as a value from '0' to '4095,' and try again.
*XRBJOBSB * CARD-NO:nn **JOB-RC NOT NUM **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified JOB RC Criterion does not consist of numbers.
- Measures:
-
Specify the JOB RC Criterion as a value from '0' to '4095,' and try again.
*XRBJOBSB * CARD-NO:nn **JOB-RC OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the JOB RC Criterion is outside the valid range.
- Measures:
-
Specify the JOB RC Criterion as a value from '0' to '4095,' and try again.
*XRBHSTSB * **HOSTTYPE NOTHING**
- Description:
-
The Host Type is not specified.
- Measures:
-
Specify the Host Type and try again.
*XRBHSTSB * **KCODETYPE NOTHING**
- Description:
-
The Kanji Code Type is not specified.
- Measures:
-
Specify the Kanji Code Type and try again.
*XRBHSTSB * **LOCAL-PROXY IS NOT SPECIFIED**
- Description:
-
A Local Net Proxy Server cannot be specified.
- Measures:
-
Install the Internet connection option, and try again.
*XRBHSTSB * HOST-ID:hostid **NORMAL END**
- hostid:
-
Host ID
- Description:
-
Registration of the Host ID ended successfully.
*XRBHSTSB * CARD-NO:nn **HOST SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Host Information.
- Measures:
-
Specify the correct syntax, and try again.
*XRBHSTSB * HOST-ID:hostid **ALREADY EXIST**
- hostid:
-
Host ID
- Description:
-
The specified Host ID is already registered.
- Measures:
-
Specify a different Host ID, or specify for the registered information to be overwritten, and try again.
*XRBHSTSB * INTERNET OPTION IS NOT INSTALL
- Description:
-
The Internet connection option is not installed.
- Measures:
-
Install the Internet connection option, and try again.
*XRBHSTSB * CARD-NO:nn **LOCAL-PROXY DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Proxy Server.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **LOCAL-PROXY-PORT NUMBER ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Proxy Port No. is invalid.
- Measures:
-
Correctly specify the Proxy Port No., and try again.
*XRBHSTSB * CARD-NO:nn **LOCAL-PROXY-PORT OVER RANGE**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Proxy Port No. is outside the valid range.
- Measures:
-
Specify the Proxy Port No. as a value from '1' to '65535' and try again.
*XRBHSTSB * UNITTYPE=DEVICE NOT SUPPORTED
- Description:
-
Specification of the Device Type is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * CARD-NO:nn **HOST SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Host Information.
- Measures:
-
Specify the correct syntax, and try again.
*XRBHSTSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The parameter defined on the definition card is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBHSTSB * CARD-NO:nn **ITEM ALL SPACE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
A space is specified in the parameter.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBHSTSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HOSTTYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Host Type.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HOSTTYPE CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Host Type selection is invalid.
- Measures:
-
Specify 'HOST,' 'LINUX,' 'WIN,' or 'IBMi' for the Host Type and try again.
*XRBHSTSB * CARD-NO:nn **KCODETYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Kanji Code Type.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **KCODETYPE CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Kanji Code Type selection is invalid.
- Measures:
-
Specify 'SHIFT-JIS,' 'JEF,' 'EUC,' 'IBM,' 'UTF-8,' 'GB18030,' or 'ZH-HANS' for the Kanji Code Type, and try again.
*XRBHSTSB * CARD-NO:nn **JIS DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the JIS Year.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **JIS CHOICE ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The selected JIS Year is invalid.
- Measures:
-
Specify either '78' or '83' for the JIS Year and try again.
*XRBHSTSB * CARD-NO:nn **RCVPORT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Receive Port No.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **RCVPORT NUMBER ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive Port No. is invalid.
- Measures:
-
Correctly specify the Receive Port No., and try again.
*XRBHSTSB * CARD-NO:nn **RCVPORT OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Receive Port No. is outside the valid range.
- Measures:
-
Specify the Receive Port No. as a value from '1' to '65535' and try again.
*XRBHSTSB * CARD-NO:nn **REQPORT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Observe Port No.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **REQPORT NUMBER ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Observe Port No. is invalid.
- Measures:
-
Correctly specify the Observe Port No., and try again.
*XRBHSTSB * CARD-NO:nn **REQPORT OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Observe Port No. is outside the valid range.
- Measures:
-
Specify the Observe Port No. as a value from '1' to '65535,' and try again.
*XRBHSTSB * CARD-NO:nn **LOCAL-PROXY OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Local Net Proxy Server is outside the valid range.
- Measures:
-
Specify the Local Net Proxy Server within 50 bytes, and try again.
*XRBHSTSB * CARD-NO:nn **CONNECTTYPE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Connection Type.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **CONNECTTYPE CHOICE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The selected Connection Type is invalid.
- Measures:
-
Specify 'L,' '1,' or '2' for the Connection Type and try again.
*XRBHSTSB * CARD-NO:nn ** HUL7MODE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Use HULFT7 Comm. Mode is invalid.
- Measures:
-
Specify 'Y' or 'N' for the Use HULFT7 Comm. Mode and try again.
*XRBHSTSB * CARD-NO:nn ** HUL7MODE DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Use HULFT7 Comm. Mode.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * DESTINATION-PROXY NOT SUPPORTED
- Description:
-
Specification of a Global Net Proxy Server is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * DESTINATION-PROXY-PORT NOT SUPPORTED
- Description:
-
Specification of a Global Net Proxy Port No. is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * DEVICEINF1 NOT SUPPORTED
- Description:
-
Specification of the Device Information 1 is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * DEVICEINF2 NOT SUPPORTED
- Description:
-
Specification of the Device Information 2 is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * CARD-NO:nn **LOCAL-PROXY-PORT DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Proxy Port No.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **COMMENT SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in the specified comment.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBHSTSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBHSTSB * CARD-NO:nn **HOSTSPSNUM DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Send Process Multiplex Level by Host.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HOSTSPSNUM NUMBER ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Send Process Multiplex Level by Host is invalid.
- Measures:
-
Correctly specify the Send Process Multiplex Level by Host and try again.
*XRBHSTSB * CARD-NO:nn **HOSTSPSNUM OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Send Process Multiplex Level by Host is outside the valid range.
- Measures:
-
Specify the Send Process Multiplex Level by Host as a value from '0' to '100' and try again.
*XRBHSTSB * CARD-NO:nn **USRNOTIFY DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Notify User Details.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **USRNOTIFY CHOICE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The Notify User Details selection is invalid.
- Measures:
-
Correctly specify the Notify User Details, and try again.
*XRBHSTSB * DOMAIN NOT SUPPORTED
- Description:
-
Specification of a Domain name is not supported. Specification will be ignored and processing will continue.
*XRBHSTSB * CARD-NO:nn **SENDPERMIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Allow Send Request/Resend Request.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **SENDPERMIT CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow Send Request/Resend Request is invalid.
- Measures:
-
Specify either '0' or '1' for the Allow Send Request/Resend Request and try again.
*XRBHSTSB * CARD-NO:nn **HULJOBPERMIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Allow to View Post-receive Job Result.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HULJOBPERMIT CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow to View Post-receive Job Result is invalid.
- Measures:
-
Specify either '0' or '1' for the Allow to View Post-receive Job Result and try again.
*XRBHSTSB * CARD-NO:nn **HULSNDRCPERMIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Allow to Notify Job Result.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HULSNDRCPERMIT CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow to Notify Job Result is invalid.
- Measures:
-
Specify either '0' or '1' for the Allow to Notify Job Result and try again.
*XRBHSTSB * CARD-NO:nn **HULRJOBPERMIT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Allow to Execute Remote Job.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **HULRJOBPERMIT CHOICE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow to Execute Remote Job is invalid.
- Measures:
-
Specify either '0' or '1' for the Allow to Execute Remote Job and try again.
*XRBHSTSB * CARD-NO:nn **ALLOWINSTTRANS DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow Instant Transfer is invalid.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHSTSB * CARD-NO:nn **ALLOWINSTTRANS CHOICEERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Allow Instant Transfer.
- Measures:
-
Specify either "0" or "1" for the Allow Instant Transfer and try again.
*XRBHSTSB * CARD-NO:nn **ALLOWINSTTRANS OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Allow Instant Transfer is outside the valid range.
- Measures:
-
Specify either "0" or "1" for the Allow Instant Transfer and try again.
*XRBHGPSB * **HGRPID NOTHING**
- Description:
-
The Transfer Group ID is not defined on the definition card.
- Measures:
-
Specify the Transfer Group ID and try again.
*XRBHGPSB * **END NOTHING**
- Description:
-
'END' is not described on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBHGPSB * **SERVER DEF NOTHING**
- Description:
-
'SERVER DEF' is not described on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBHGPSB * **DEFEND NOTHING**
- Description:
-
'DEFEND' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBHGPSB * **NORMAL END** HGRP-ID:hgrpid
- hgrpid:
-
Transfer Group ID
- Description:
-
Specification of the Transfer Group ID ended successfully.
*XRBHGPSB * CARD-NO:nn **HGRPID SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Transfer Group Information.
- Measures:
-
Specify the correct syntax, and try again.
*XRBHGPSB * **ALREADY EXIST** HGRP-ID:hgrpid
- hgrpid:
-
Transfer Group ID
- Description:
-
The specified Transfer Group ID is already registered.
- Measures:
-
Specify a different Transfer Group ID, or specify for the registered information to be overwritten, and try again.
*XRBHGPSB * **SERVER INFORMATION NOTHING**
- Description:
-
The Host Name is not defined on the definition card.
- Measures:
-
Specify the Host Name and try again.
*XRBHGPSB * CARD-NO:nn **HGRPID ALPHA NUM ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Transfer Group ID does not consist of alphanumeric characters and/or "_".
- Measures:
-
Specify the Transfer Group ID in alphanumeric characters (and "_" if desired) within 50 bytes and try again.
*XRBHGPSB * CARD-NO:nn **END DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate 'END' definitions exist on the definition card.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHGPSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate definitions exist for the Comment on the definition card.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHGPSB * CARD-NO:nn **ITEM ALL SPACE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
A space is specified in the parameter.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBHGPSB * CARD-NO:nn **SERVER NOTHING **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Host Name is not specified.
- Measures:
-
Specify the Host Name and try again.
*XRBHGPSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified parameter is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBHGPSB * CARD-NO:nn **SERVER OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Host Name is outside the valid range.
- Measures:
-
Specify the Host Name within 50 bytes, and try again.
*XRBHGPSB * CARD-NO:nn **SERVER MAX 1000 OVER**
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many host names are specified.
- Measures:
-
Specify up to 1000 Host Names, and try again.
*XRBHGPSB * CARD-NO:nn **SERVER ALPHA NUM ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Host Name does not consist of alphanumeric characters.
- Measures:
-
Specify the Host Name in alphanumeric characters within 50 bytes, and try again.
*XRBHGPSB * CARD-NO:nn **SERVER DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Host Name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBHGPSB * CARD-NO:nn **COMMENT SYNTAX ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in the specified comment.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBHGPSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBFMTSB * **FMTID NOTHING** FMT-ID=fmtid
- fmtid:
-
Format ID
- Description:
-
The Format ID is not defined on the definition card.
- Measures:
-
Specify the Format ID and try again.
*XRBFMTSB * **END NOTHING**
- Description:
-
'END' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBFMTSB * **FORMAT DEF NOTHING**
- Description:
-
'FORMAT DEF' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBFMTSB * **DEFEND NOTHING**
- Description:
-
'DEFEND' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBFMTSB * **NORMAL END** FMT-ID:fmtid
- fmtid:
-
Format ID
- Description:
-
Registration of the Format ID ended successfully.
*XRBFMTSB * **ALREADY EXIST** FMT-ID:fmtid
- fmtid:
-
Format ID
- Description:
-
The specified Format ID is already registered.
- Measures:
-
Specify a different Format ID, or specify for the registered information to be overwritten, and try again.
*XRBFMTSB * **FORMAT INFORMATION NOTHING**
- Description:
-
The Format Information is not defined on the definition card.
- Measures:
-
Specify the Format Information and try again.
*XRBFMTSB * CARD-NO:nn **FMTID SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Format ID.
- Measures:
-
Specify the correct syntax, and try again.
*XRBFMTSB * CARD-NO:nn **FMTID ALPHA NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Format ID does not consist of alphanumeric characters and/or "_".
- Measures:
-
Specify the Format ID in alphanumeric characters (and "_" if desired) within 50 bytes and try again.
*XRBFMTSB * CARD-NO:nn **END DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate descriptions exist for 'END.'
- Measures:
-
Correct the duplicate parameter and try again.
*XRBFMTSB * CARD-NO:nn **FORMAT-ID NOTHING **
- nn:
-
Number of the card where the error occurred
- Description:
-
The Format ID is not specified.
- Measures:
-
Specify the Format ID and try again.
*XRBFMTSB * CARD-NO:nn **DEFINE STATEMENT ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in 'DEFINE' defined on the definition card.
- Measures:
-
Specify the correct syntax, and try again.
*XRBFMTSB * CARD-NO:nn **COMMENT DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBFMTSB * CARD-NO:nn **ITEM ALL SPACE ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in the specified Field Name.
- Measures:
-
Specify the correct syntax, and try again.
*XRBFMTSB * CARD-NO:nn **ITEM COUNT MAX OVER **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many field names are specified.
- Measures:
-
Reduce the number of specified fields.
*XRBFMTSB * CARD-NO:nn **ITEMNM LENGTH ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Field Name is outside the valid range.
- Measures:
-
Specify the Field Name within 16 bytes, and try again.
*XRBFMTSB * CARD-NO:nn **ITEMNM DUPLICATE ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Field Name.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBFMTSB * CARD-NO:nn **START COLUMN NUM ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified number for the Start Position is invalid.
- Measures:
-
Correctly specify the Start Position, and try again.
*XRBFMTSB * CARD-NO:nn **START COLUMN PNT ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified point for the Start Position is invalid.
- Measures:
-
Correctly specify the Start Position, and try again.
*XRBFMTSB * CARD-NO:nn **LENGTH NUMERIC ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Byte Count does not consist of numbers.
- Measures:
-
Specify the Byte Count as a value from '1' to '9999,' and try again.
*XRBFMTSB * CARD-NO:nn **TYPE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified data type is invalid.
- Measures:
-
Correctly specify the data type, and try again.
*XRBFMTSB * CARD-NO:nn **SMALL AMOUNT NUM ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Decimal Places does not consist of numbers.
- Measures:
-
Specify a number and try again.
*XRBFMTSB * CARD-NO:nn **SMALL AMOUNT LEN ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Decimal Places is outside the valid range.
- Measures:
-
Specify the Decimal Places as a value from '0' to '9,' and try again.
*XRBFMTSB * CARD-NO:nn **KANJI DATA LENGTH ER**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified length for kanji type data is invalid.
- Measures:
-
Specify the Byte Count in multiples of 2 and try again.
*XRBFMTSB * CARD-NO:nn **BINARY LENGTH ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified length for binary type data is invalid.
- Measures:
-
Specify '2,' '4,' or '8' for the Byte Count and try again.
*XRBFMTSB * CARD-NO:nn **FLOAT-DEC LENGTH ERR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified length for floating decimal point type data is invalid.
- Measures:
-
Specify either '4' or '8' for the Byte Count and try again.
*XRBFMTSB * CARD-NO:nn **ZONE-DEC LENGTH ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified length for unsigned external decimal type data is invalid.
- Measures:
-
Specify a value from '1' to '18' for the Byte Count and try again.
*XRBFMTSB * CARD-NO:nn **PACK-DEC LENGTH ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified length for signed internal decimal type data is invalid.
- Measures:
-
Specify a value from '1' to '10' for the Byte Count and try again.
*XRBFMTSB * CARD-NO:nn **SMALL AMOUNT ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The value specified for the Decimal Places is invalid.
- Measures:
-
Specify the Decimal Places as a value from '0' to '9,' and try again.
*XRBFMTSB * CARD-NO:nn **COMMENT ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is invalid.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBFMTSB * CARD-NO:nn **COMMENT LENGTH ERROR**
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBMFMSB * **MFMTID NOTHING**
- Description:
-
The Multi Format ID is not defined on the definition card.
- Measures:
-
Specify the Multi Format ID and try again.
*XRBMFMSB * **END NOTHING**
- Description:
-
'END' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBMFMSB * **MFORMAT DEF NOTHING**
- Description:
-
'MFORMAT DEF' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBMFMSB * **DEFEND NOTHING**
- Description:
-
'DEFEND' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBMFMSB * **KEY-START NOTHING**
- Description:
-
'KEY-START' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBMFMSB * **KEY-LEN NOTHING**
- Description:
-
'KEY-LEN' is not defined on the definition card.
- Measures:
-
Correctly define the definition card, and try again.
*XRBMFMSB * **NORMAL END** MFMT-ID:mfmtid
- mfmtid:
-
Multi Format ID
- Description:
-
Registration of the Multi Format ID ended successfully.
*XRBMFMSB * CARD-NO:nn **MFMTID SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error on the definition card for the Multi Format ID.
- Measures:
-
Specify the correct syntax, and try again.
*XRBMFMSB * **ALREADY EXIST** MFMT-ID:mfmtid
- mfmtid:
-
Multi Format ID
- Description:
-
The specified Multi Format ID is already registered.
- Measures:
-
Specify a different Multi Format ID, or specify for the registered information to be overwritten, and try again.
*XRBMFMSB * **MFORMAT INFORMATION NOTHING**
- Description:
-
The Multi Format Information is not defined on the definition card.
- Measures:
-
Specify the Multi Format Information and try again.
*XRBMFMSB * **KEY DUPLICATE ERR**
- Description:
-
Duplicate specifications exist for the Key Value.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **MFMTID ALPHA NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Multi Format ID does not consist of alphanumeric characters and/or "_".
- Measures:
-
Specify the Multi Format ID in alphanumeric characters (and "_" if desired) within 50 bytes and try again.
*XRBMFMSB * CARD-NO:nn **END DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate descriptions exist for 'END.'
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **ITEM NAME ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified parameter name is invalid.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBMFMSB * CARD-NO:nn **KEY-START DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Key Start Position.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **KEY-LEN DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Key Length.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **DEFAULT-FMT DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Default Format ID.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **COMMENT DUPLICATE**
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for the Comment.
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **ITEM ALL SPACE ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
There is a syntax error in the specified parameter.
- Measures:
-
Specify the correct syntax, and try again.
*XRBMFMSB * CARD-NO:nn **DEFEND DUPLICATE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Duplicate specifications exist for 'DEFEND.'
- Measures:
-
Correct the duplicate parameter and try again.
*XRBMFMSB * CARD-NO:nn **ITEM LENGTH ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specified parameter is outside the valid range.
- Measures:
-
Correctly specify the parameter, and try again.
*XRBMFMSB * CARD-NO:nn **MFORMAT MAX 20 OVER **
- nn:
-
Number of the card where the error occurred
- Description:
-
The number of specified Format IDs exceeds 20.
- Measures:
-
Specify up to 20 Format IDs and try again.
*XRBMFMSB * CARD-NO:nn **KEY ALPHA NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Key Value does not consist of alphanumeric characters.
- Measures:
-
Specify the Key Value in alphanumeric characters within 20 bytes, and try again.
*XRBMFMSB * CARD-NO:nn **MFMT ALPHA NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Multi Format ID does not consist of alphanumeric characters and/or "_".
- Measures:
-
Specify the Multi Format ID in alphanumeric characters (and "_" if desired) within 50 bytes and try again.
*XRBMFMSB * CARD-NO:nn **KEY OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many key values are specified.
- Measures:
-
Correctly specify the Key Value, and try again.
*XRBMFMSB * CARD-NO:nn **KEY-START OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Key Start Position is outside the valid range.
- Measures:
-
Specify a value from '1' to '19997' for the Key Start Position and try again.
*XRBMFMSB * CARD-NO:nn **KEY-LEN OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many key lengths are specified.
- Measures:
-
Correctly specify the Key Length, and try again.
*XRBMFMSB * CARD-NO:nn **KEY-LEN NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Key Length does not consist of numbers.
- Measures:
-
Specify a value from '1' to '20' for the Key Length and try again.
*XRBMFMSB * CARD-NO:nn **KEY-LEN OVER RANGE **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Key Length is outside the valid range.
- Measures:
-
Specify a value from '1' to '20' for the Key Length and try again.
*XRBMFMSB * CARD-NO:nn **DEFAULT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
Too many default format IDs are specified.
- Measures:
-
Specify a single default format ID and try again.
*XRBMFMSB * CARD-NO:nn **ALPHA NUM ERR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Default Format ID does not consist of alphanumeric characters.
- Measures:
-
Specify the Default Format ID in alphanumeric characters within 50 bytes and try again.
*XRBMFMSB * CARD-NO:nn **COMMENT SYNTAX ERROR **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is invalid.
- Measures:
-
Correctly specify the Comment, and try again.
*XRBMFMSB * CARD-NO:nn **COMMENT OVERFLOW **
- nn:
-
Number of the card where the error occurred
- Description:
-
The specification for the Comment is outside the valid range.
- Measures:
-
Specify the Comment within 60 bytes and try again.
*XRBMFMSB * **UNDEFINE** FMTID:fmtid
- fmtid:
-
Format ID
- Description:
-
The Format ID is not registered.
- Measures:
-
Register the Format ID and try again.
*XRBMFMSB * **KEY LENGTH ERROR**
- Description:
-
The specification for the Key Value is outside the valid range.
- Measures:
-
Specify the Key Value within 20 bytes, and try again.
*XRBMFMSB * **KEY LENGTH + KEY START-POINT ERROR**
- Description:
-
The values specified for the Key Length and the Key Start Position are invalid.
- Measures:
-
Specify the Key Length and the Key Start Position that add up to a value no more than 19998, and try again.
*XRBSNDSB * CARD-NO:nn **DEFLATE IS NOT AVAILABLE IN YOUR GRADE **
- nn:
-
Number of the card where the error occurred
- Description:
-
You cannot specify DEFLATE compression for your product grade.
- Measures:
-
Upgrade your product to one that supports DEFLATE compression, or specify "NO," "1," or "2" for Compression Preference.
*XRBSNDSB * CARD-NO:nn **SERIALNO OR PRODUCTKEY IS INVALID **
- nn:
-
Number of the card where the error occurred
- Description:
-
The serial number or product key is invalid.
- Measures:
-
Check if the serial number and product key are specified as the correct values.
*XRBSNDSB * CARD-NO:nn **DEFLATE IS NOT SUPPORTED FOR WORK FILE **
- nn:
-
Number of the card where the error occurred
- Description:
-
Work File Transfer does not support DEFLATE compression.
- Measures:
-
Use direct transfer. Or, specify a compression type other than DEFLATE.