Joined File Break messages

This is a card definition error. (There is no ", *, or -.)

Correctly define the TGTFILE parameter on the XRCRD definition card, and try again.

The file for which the request to split was issued is not a joined file.

Specify a file that is joined with the joined file, and try again.

The data file does not exist. (This is a joined file error.)

Correctly specify the joined file, and try again.

The data file does not exist. (This is a joined file error.)

Correctly specify the joined file, and try again.

This is a joined file error. (Seek size, etc.)

Correctly specify the joined file, and try again.

This is a joined file error. (Seek size, etc.)

Correctly specify the joined file, and try again.

A member already exists for the Partitioned Organization file.

Correctly define the REP parameter on the XRCRD definition card, and try again.

Record Length is not defined.

Correctly define the LRECL parameter on the XRCRD definition card, and try again.

The user table does not exist. (EBCDIC Code Set)

Correctly specify the user code conversion table, and try again.

Either the multi format table or the record data is incorrect.

Correctly specify the joined file, and try again.

Partitioned Organization files cannot be split.

Correctly specify the output destination file, and try again.

The file already exists, and the record format, record length, and block size differ from the values that you specified for the corresponding parameters. Therefore, the data cannot be replaced.

Correctly define the parameter on the XRCRD definition card, and try again.

**WARNING** Overflow has occurred in joined data.

Correctly specify the record length of the output destination file, and try again.

The record length of the file defined in DD is invalid.

Correctly specify the record length of the output destination file, and try again.

Binary type break is not possible. (0 is set for LRECL.)

Correctly define the LRECL parameter on the XRCRD definition card, and try again.

A system error occurred when the output destination file was opened.

Correctly set the output destination file, and try again.

This is a code conversion error.

Correctly specify the code conversion table, and try again.

The parameters in the Format (Multi Format) Information table are incorrect. (This is an joined file error.)

Correctly specify the joined file, and try again.

The record length defined on the card is incorrect. (When the transfer type is Format or Multi Format)

Correctly define the LRECL parameter on the XRCRD definition card, and try again.

Partitioned Organization files that are variable-length cannot be split.

The XRCRD definition card does not exist.

Correctly specify a card, and try again.

The XRCRD definition card (length of the target file) is incorrect.

Correctly define the TGTFILE parameter on XRCRD, and try again.

The name of the target file is incorrect.

Correctly define the TGTFILE parameter on the XRCRD definition card, and try again.

The parameter on the XRCRD definition card is incorrect.

Correctly define the parameter on the XRCRD definition card, and try again.

Either the parameter name for the card already exists, or the parameter definition is incorrect. (Check the position of commas.)

Correctly define the parameter on the XRCRD definition card, and try again.

The sequence number and the target file cannot be specified at the same time.

Correctly define either SEQNO or TGTFILE on the XRCRD definition card, and try again.

The SEQNO or TGTFILE does not exist on the XRCRD definition card.

Correctly define either the SEQNO or the TGTFILE on the XRCRD definition card, and try again.

The numerical value for the parameter on the XRCRD definition card is incorrect.

Correctly define the parameter on the XRCRD definition card, and try again.

The Sequence Number is incorrect.

Correctly define the SEQNO parameter on the XRCRD definition card, and try again.

The 1ST Extent for space capacity is incorrect.

Correctly define the SPACE parameter on the XRCRD definition card, and try again.

The record length, the block size, or the record format defined on the XRCRD definition card is incorrect.

Correctly define the LRECL parameter, BLOCKLEN parameter, and RECFM parameter on the XRCRD definition card, and try again.

The record length or the block size defined on the XRCRD definition card is 0.

Correctly define the XRCRD definition card, and try again.

The block size defined on the XRCRD definition card is incorrect.

Correctly define the BLOCKLEN parameter on the XRCRD definition card, and try again.

The sequence number defined on the XRCRD definition card is incorrect.

Correctly define the SEQNO parameter on the XRCRD definition card, and try again.

The volume serial number is not defined on the XRCRD definition card.

Correctly define the VOL parameter on the XRCRD definition card, and try again.

The DD name defined on the XRCRD definition card is incorrect.

Correctly define the parameter on the XRCRD definition card, and try again.

The space capacity defined on the XRCRD definition card is incorrect.

Correctly define the SPACE parameter on the XRCRD definition card, and try again.

The length of the parameter value on the XRCRD definition card is incorrect.

Correctly define the parameter on the XRCRD definition card, and try again.

The defined DD dataset name is incorrect.

Correctly define the DD parameter on the XRCRD definition card, and try again.

The joined file cannot be split.

Code conversion from the code set that was in use when the files were joined is not possible. Use a code set that supports splitting of files, join the files, and try again.

You can split only a joined file that uses a Japanese character code set.

If the Code Set for Transfer (cs4trnsfr) in the System Environment is specified as 'UTF-8,' you can only split a file if the Transfer Type that was in use when the files were joined was binary transfer.

The parameter of the 1ST Extent for space capacity on the XRCRD definition card is insufficient.

Correctly define the SPACE parameter on the XRCRD definition card, and try again.

The Record Length parameter or the Block Size parameter is incorrect.

Correctly define the LRECL parameter or the BLOCKLEN parameter on the XRCRD definition card, and try again.

Failed to create the output file.

Look up the Error code and take the appropriate measures.

The number of directory blocks is insufficient.

Increase the number of specified directory blocks, and try again.

GETMAIN failed to obtain the memory for the virtual work region.

Either reduce the number of files to split or increase the REGION size, and try again.

When splitting a format-type file, HULFT split the data by applying the length found in the applicable record of the Format Information, because the specified record length and the length found in the applicable record of the Format Information were different. (If the output destination is variable-length, the value is the length found in the Format Information plus 4 bytes.)

Check the length found in the Format Information, and either specify the same record length as that found in the Format Information or omit the record length before splitting.

Failed to split a format-type file. When splitting is carried out by overwriting an existing file, splitting is not possible if the length found in the applicable record of the Format Information and the record length of the existing file are different. (If the output destination is variable-length, the value is the length found in the Format Information plus 4 bytes.)

Specify a record length that is the same length as that found in the Format Information.

Failed to split the file at the output destination. When splitting is carried out by overwriting an existing file, HULFT cannot split the file into the following files:

• Partitioned Organization files in variable-length format

• Files in an organization other than Sequential Organization or Partitioned Organization

• Files in a format other than fixed-length or variable-length

Refer to the reason for the error above, check the format of the file at the output destination, and split into a file in a supported format.

Failed to open the XRCRD file.

Check the attributes and record length of XRCRD, and specify the correct file.

This is an execution parameter error.

Correctly specify the execution parameter, and try again.

The parameter is invalid.

Correctly define the parameter on the XRCRD definition card, and try again.

Addition of a member to the Partitioned Organization file resulted in an error.

Re-create the output destination file and try splitting again.

When splitting a format or multi format-type file, HULFT split the data into files the record length of which is less than the data length found in the applicable record of the Format Information. Data may have been truncated.

Correctly specify the record length of the output destination file, and try again.

A user table cannot be specified for code conversion from UTF-8.

Check the EBCDIC Code Set parameter on the XRCRD definition card, and define something other than a user table.

Code conversion from UTF-8 is not possible.

Check if the code that could not be converted matches the UTF-8 code system.

Failed to acquire output file information.

Look up the Error code and take the appropriate measures.

Successfully output the split data to the target DD. (ML=I)

Output the split data to the data set that is shown in dsname. (ML=I)

Output the split data to the member that is shown in memname. (ML=I)

**WARNING** Overflow has occurred in joined data.

Correctly specify the record length of the output destination file, and try again.

**WARNING** Overflow has occurred in joined data.

Correctly specify the record length of the output destination file, and try again.

Failed to set the attribute information for the output file. Split the files using the default value of the displayed attribute.

The format of the joined file is not supported.

Specify the supported format for XRJOIN, which is used by HULFT to split the file with XRBREAK, and try again.