HULFT-29988

The requestor-side host name may not be output correctly to the console log

Phenomenon

The requestor-side host name may not be output correctly to the console log.

Severity level

D: low

Affected versions

From Ver.7.0.0 to Ver.10.2.0A

Modified version

Ver.10.2.1

Condition to reproduce

This phenomenon may occur when all of the following conditions are met:

• The requestor-side host is either of the following:

  • A version earlier than HULFT Ver.8.0.0.

  • HULFT Ver.8.0.0 or later, and "Yes" (Y) is specified for Use HULFT7 Comm. Mode (HUL7MODE) of the requestee-side host registered in the Host Information.

• The requestor-side host name is 68 bytes.

• The version of the requestee-side host (local host) is between HULFT Ver.7.0.0 and HULFT Ver.8.5.0, and one of the following is specified for IP Version (ipversion) in the System Environment Settings:

  • 4/6 (Use IPv4 first when connecting to the remote host, try with IPv6 if connection fails; use both IPv4 and IPv6 when being connected to)

  • 6/4 (Use IPv6 first when connecting to the remote host, try with IPv4 if connection fails; use both IPv4 and IPv6 when being connected to)

  • 6 (Use IPv6 when connecting to the remote host; use only IPv6 when being connected to)

Alternative workaround

None

Status description

Even if the above conditions are met, the requestor-side host name is output correctly.