HULFT-29431
On the Transfer Status List screen, certain sending-side host names may not be displayed correctly
- Phenomenon
-
On the Transfer Status List screen, certain sending-side host names may not be displayed correctly.
- Severity level
-
D: low
- Affected versions
-
From Ver.7.0.0 to Ver.10.2.0A
- Modified version
-
Ver.10.2.1
- Condition to reproduce
-
This phenomenon may occur when all of the following conditions are met:
-
The sending-side host name is not registered in the Host Information.
-
The sending-side host name described below is two bytes longer than the host name from reverse lookup.
-
Sending-side host name
The host name used on the sending-side host
-
Host name from reverse lookup
The sending-side host name on the receiving-side host (local host), which is obtained from the reverse host name lookup performed internally in HULFT
-
-
The version of the receiving-side host (local host) is between HULFT Ver.7.0.0 and HULFT Ver.8.5.0, and one of the following is specified for IP Version (ipversion) in the System Environment Settings:
-
4/6 (Use IPv4 first when connecting to the remote host, try with IPv6 if connection fails; use both IPv4 and IPv6 when being connected to)
-
6/4 (Use IPv6 first when connecting to the remote host, try with IPv4 if connection fails; use both IPv4 and IPv6 when being connected to)
-
6 (Use IPv6 when connecting to the remote host; use only IPv6 when being connected to)
-
-
- Alternative workaround
-
None
- Status description
-
Even if the above conditions are met, the host name is displayed correctly in Transfer Status List.