Host Information

You can register the detailed information about the host on the sending side or the host on the receiving side. There are two ways to register the information.

• Registration using the HULFT Management Console

  => Refer to Using the Host Information

• Registration by running commands with parameter files

  => Refer to Management Information Batch Registration command

Field List

In the table below, the check marks in the Optional column indicate the fields considered optional during registration from the HULFT Management Console. Optional fields and mandatory fields for registration by running commands with parameter files may differ from those for registration using the HULFT Management Console.

For details on optional fields and mandatory fields for the registration by running commands with parameter files, refer to Management Information Batch Registration command.

Table 2.8 List of Host Information Fields

Field Name			Default Value	Setting Value	Optional	Remarks
Screen		File
Host Name		HOST		Alphanumeric characters, particular symbols (*1)	-	Within 68 bytes
Comment		COMMENT		Characters	✓	Within 60 bytes
Basic Settings
	Host Type	HOSTTYPE	Windows (W)	H, L, W, I	-	(*2)
	Code Set for Transfer	KCODETYPE	SHIFT-JIS (S)	S, E, 8, J, I, G, C	-	(*2)
	Receive Port No.	RCVPORT	30000	1–65535	-
	Observe Port No.	REQPORT	31000	1–65535	-
	Standard for Japanese	JISYEAR	83JIS(1)	0, 1	-	(*2)
	Connection Type	CONNECTTYPE	LAN(L)	LAN(L)	✓	(*3)
	Send Process Multiplex Level by Host	HOSTSPSNUM	0	0–999	✓
	Use HULFT7 Comm. Mode	HUL7MODE	No (N)	N, Y	✓	(*3)
Proxy Server
	Proxy Server Name	MYPROXYNAME
	Proxy Port No.	MYPROXYPORT
Security
	Allow Send Request/Resend Request	SENDPERMIT	Yes (Y)	Y, N	✓	(*3)
	Allow to View Post-receive Job Result	HULJOBPERMIT	Yes (Y)	Y, N	✓	(*3)
	Allow to Notify Job Result	HULSNDRCPERMIT	Yes (Y)	Y, N	✓	(*3)
	Allow to Execute Remote Job	HULRJOBPERMIT	Yes (Y)	Y, N	✓	(*3)
	Allow Instant Transfer	ALLOWINSTTRANS	No (N)	Y, N	✓	(*3)
	Notify User Details	USRNOTIFY	No (N)	Y, N	✓	(*3)

✓	:	Optional
-	:	Mandatory

*1	:	Only hyphens (-) and periods (.) can be set. Note that, in HULFT-HUB, a host name with an underscore (_) may automatically be set. The host name with an underscore (_) is only used to manage HULFT by HULFT-HUB. You cannot use an underscore (_) in a host name for transfer.
*2	:	For the HULFT Management Console, click a setting value on the pulldown list.
*3	:	For the HULFT Management Console, click a setting value on the pulldown list. When you do not specify this field, the default value will be set.

Explanation of each field

This section explains the fields to be specified in the Host Information. The parenthesized strings are the names of each field and you can use them as field tags in a parameter file when registering the information.

Host Name (HOST)

Host name that identifies the host on the sending side or the host on the receiving side

At the time of sending, this host name is linked with the host name of the Transfer Group Information.

When receiving is carried out, this host name is linked with the local host name of the host on the sending side.

Comment (COMMENT)

Comment for the host

Basic Settings

Host Type (HOSTTYPE)

Type of the operating system for the host that is specified for Host Name (HOST)

Mainframe (H):

Mainframe

Linux/UNIX (L):

Linux/UNIX/NonStop

Windows (W):

Windows

IBMi (I):

IBM i

Code Set for Transfer (KCODETYPE)

Character code for the host that is specified for Host Name

• SHIFT-JIS (S)

• EUC-JP (E)

• UTF-8 (8)

• JEF (J)

• IBM Kanji (I)

• GB18030 (G)

• IBM Simplified Chinese (C)

Receive Port No. (RCVPORT)

Port number used by the Receive process

Observe Port No. (REQPORT)

Port number used by the Observe process

Standard for Japanese (JISYEAR)

JIS Year of the character code that is specified for Code Set for Transfer (KCODETYPE)

The setting is valid only for Code-set Conversion for Japanese.

• 78JIS (0)

• 83JIS (1)

Omitting this field sets '83JIS' (1).

Connection Type (CONNECTTYPE)

Connection type for the host that is specified for Host Name

LAN(L):

Specify this parameter when a LAN connection is used.

You can set only 'LAN' (L).

Omitting this field sets 'LAN' (L).

Send Process Multiplex Level by Host (HOSTSPSNUM)

Send Multiplex Level for the host that is specified for Host Name

When you set '0' to this field, HULFT does not check the multiplex level of sending by host.

Omitting this field sets '0.'

Set a value for Send Process Multiplex Level by Host that is equal to or lower than the value that is set for Send Multiplex Level in the System Environment Settings.

Use HULFT7 Comm. Mode (HUL7MODE)

Type of the communication method for the host that is specified for Host Name

No (N):

HULFT first uses the communication method for HULFT10 to connect to the remote host. If the remote host uses a lower version, HULFT switches to the communication method for HULFT7.

Yes (Y):

HULFT uses the communication method for HULFT7 from the beginning.

Omitting this field sets 'No' (N).

Proxy Server

Proxy Server Name (MYPROXYNAME)

Proxy Port No. (MYPROXYPORT)

Settings for the server that relays communication

These fields are set for HULFT10 Smart Proxy, HULFT-HUB or HULFT-WebConnect.

Security

Allow Send Request/Resend Request (SENDPERMIT)

Specify whether to acknowledge the services of the Send Request (SEND) and the Resend Request (RESEND).

Yes (Y):

Acknowledge the services

No (N):

Refuse to acknowledge the services

Omitting this field sets 'Yes' (Y).

Allow to View Post-receive Job Result (HULJOBPERMIT)

Specify whether to acknowledge the service of the Post-receive Job Result Inquiry Request (HULJOB).

Yes (Y):

Acknowledge the service

No (N):

Refuse to acknowledge the service

Omitting this field sets 'Yes' (Y).

Allow to Notify Job Result (HULSNDRCPERMIT)

Specify whether to acknowledge the service of the Job Execution Result Notification (HULSNDRC).

Yes (Y):

Acknowledge the service

No (N):

Refuse to acknowledge the service

Omitting this field sets 'Yes' (Y).

Allow to Execute Remote Job (HULRJOBPERMIT)

Specify whether to acknowledge the service of the Remote Job Execution (HULRJOB).

Yes (Y):

Acknowledge the service

No (N):

Refuse to acknowledge the service

Omitting this field sets 'Yes' (Y).

Allow Instant Transfer (ALLOWINSTTRANS)

Specify whether to accept requests for instant transfer from the host specified for Host Name (HOST).

Yes (Y):

Accept the requests for instant transfer

No (N):

Refuse the requests for instant transfer

Specify whether to accept or reject requests for instant transfer on the receiving-side host.

If omitted, "No (N)" is set.

Notify User Details (USRNOTIFY)

Specify whether to notify the user ID (operating system) and the user ID (Management Console) to the host at the connection destination.

Yes (Y):

Notify

No (N):

Do not notify

For details on the user ID, refer to the following:

HULFT10 for Windows Administration Manual : Notify User Details

Omitting this field sets 'No' (N).

Points to be noted when setting