Send Detail Information screen

On this screen, you can check details of the Send log.

The Send Detail Information screen is shown as follows:

Explanation of each field

File ID

The file ID registered in the Send Management Information is displayed.

= Remarks =

When instant transfer is used for a transfer, "_INSTANT_TRANSFER_" is displayed for the file ID in the log record.

Receive Host

The name of the receiving host is displayed.

File Name

The name of the Send file is displayed.

Send Acknowledge Date

The time and date when Send File is acknowledged is displayed.

= Remarks =

The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.

For details, refer to the following:

HULFT10 for Windows Administration Manual : Global

Send Date

The date on which sending starts is displayed.

The date is expressed in the format of "Start time of sending - End time of sending."

= Remarks =

The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.

For details, refer to the following:

HULFT10 for Windows Administration Manual : Global

Status Code

The status code of sending is displayed.

The code is expressed in the format of "status code-detail code."

Refer to the following for more information on the status code and the detail code:

HULFT10 for Windows Error Codes and Messages : Code Conversion by HULFT

Interface DBID

The Interface DBID registered in the Send Management Information is displayed.

IP Version (ipversion)

The IP version that is transmitted is displayed.

IPv4:: Connected at IPv4
IPv6:: Connected at IPv6

Record Count

The number of records of the sent file is displayed.

Data Size

The data size of the sent file is displayed. The unit is byte.

Transmission Rate

The transfer data length per second is displayed. The unit is byte.

Compression Ratio

The compression ratio at the time of carrying out compression is displayed. The unit is percentage.

Transfer Block Length

The length of one transfer block of the Send file is displayed. The unit is byte.

Transfer Block Count

The number of blocks of the Send file per transfer is displayed.

Identifier

The identifier that links the Send Log and the operation log is displayed.

Encryption Used

This field displays the type of the Encryption Scheme that is used for the transfer.

-:: Transfer does not use ciphers
HULFT:: HULFT Encryption Scheme
AES:: HULFT Cipher Option (AES)
OTHER:: Encryption Scheme other than the above

Transfer ID

The unique identifier that is issued for the file transfer is displayed.

Compression Preference

The compression preference that is used for the transfer is displayed.

None:: Transfer data without using compression
Horizontal:: Transfer data using horizontal compression (compression within records)
Vertical:: Transfer data using vertical compression (compression across records)
DEFLATE:: Transfer data using DEFLATE compression
Zstandard:: Transfer data using Zstandard compression

When a log file for a lower version is converted, "---" is displayed.

Connection Type

The mode of connection to the receiving host is displayed.

LAN:: LAN connection

Code Converted By

The host on which code conversion is executed is displayed.

Sending Side:: Execute code conversion on the sending-side host
Receiving Side:: Execute code conversion on the receiving-side host
No Conversion:: Execute the transfer without code conversion or binary transfer

When a log file for a lower version is converted, "---" is displayed.

Comment

The comment that is registered in the Send Management Information for the transfer is displayed.

Job

When a Post-send Job is executed, the job execution log is displayed in the Sending Side Job Status section.

You can also check the Job Information of the receiving host on this screen.

For details, refer to Case where the Post-send Job is executed and Case where you check the Receiving Side Job status.

Message

When the message is used, the contents are displayed in the Message section.

For details, refer to Case where the message is used.

Description

The description of the error is displayed.

Measure

The measure for the error is displayed.

= Remarks =

If there is differential between Send Acknowledge Date and Send Date, following causes are suspected:
- Send File is issued more than specified in Send Process Multiplex Level or Send Process Multiplex Level by Host, which leads HULFT to send-waiting status.
- Auto Resend is executed several times.
You can view the date of request acknowledgment of the transfer of which transfer status is Standby or Transferring on the Transfer Status List screen.

For details on the Transfer Status List screen, refer to Transfer Status List screen.

Case where the Post-send Job is executed

When the Post-send Job is executed, the job execution log is displayed in the Sending Side Job Status section.

Explanation of each field

Job Execution Date

The date on which the job that was last executed is displayed.

= Remarks =

The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.

For details, refer to the following:

HULFT10 for Windows Administration Manual : Global

Job Name

The job name that is activated after completion of Send processing is displayed.

Start Time

The time when the job starts is displayed.

End Time

The time when the job ends is displayed.

Status

The completion status of the job is displayed.

0:: Successful completion of the job
Other than 0:: Abnormal termination (exit status of the startup job)

Note

Regarding the Sending Side Job Status section, if the status code is "0", successful job execution is displayed and, if the status code is other than "0", unsuccessful job execution information is displayed.
The Pre-send Job is not displayed in the Sending Side Job Status section.

= Remarks =

End Time in the Sending Side Job Status section is "9" in the following cases:

When the sending side job is not executed as, there is no entry of the job ID in the Job Information or due to the definition error of the Job Information.
When job ends unsuccessfully.

Case where you check the Receiving Side Job status

You can check the Receiving Side Job Status on the Send Detail Information screen.

To display this screen, click Receive Side Job when the job execution log is displayed in the Sending Side Job Status section.

Explanation of each field

Job Execution Date

The date on which the job that was last executed is displayed.

= Remarks =

The date format varies depending on Date Format (datefmt) that is specified in the System Environment Settings.

For details, refer to the following:

HULFT10 for Windows Administration Manual : Global

Job Name

The name of the job that is activated after completion of Receive processing is displayed.

Start Time

The time when the job starts is displayed.

End Time

The time when the job ends is displayed.

Status

Where the host on the receiving side is HULFT for Windows:

Status at the end of job

0:

Successful completion of the job

Other than 0:

Abnormal termination (the exit status of the job started)
Where the host on the receiving side is other than HULFT for Windows:

Refer to the following of HULFT on the receiving side:

HULFT10 for Linux/AIX Operation Manual : Sending Side Job Status and Receiving Side Job Status

HULFT10 for IBMi Operation Manual : Job status information for the sending side and the receiving side

HULFT10 for zOS Operation Manual : Sending Side Job Status and Receiving Side Job Status

Note

You may not be able to view the Receiving Side Job Status correctly in the following cases:
- When there is a difference in the system time of the target host and the source host
- When the Job Monitor Request (HULJOB) is not supported on the receiving side
- When the Observe process of the receiving side host is not activated
If the file ID exceeds 8 bytes, the Receiving Side Job Status cannot be displayed.

= Remarks =

End Time in the Sending Side Job Status section is "9" in the following cases:

When the send job is not executed as there is no entry of the job ID in the Job Information or due to the definition failure of the Job Information
When the job ends unsuccessfully
When the job ends in time-out state

Case where the message is used

When the message is used, the contents are displayed in the Message section. When no value is specified, it is displayed as blank.

Explanation of each field

Message 0 to Message 5: Messages that were specified when the Send File was issued or that were received when the Send Request was acknowledged are displayed.
Long Message 0 to Long Message 1: Long messages that were specified when the Send File was issued or that were received when the Send Request was acknowledged are displayed.