Startup of processes

Start HULFT first, and then activate the Send process, the Receive process, and the Observe process.

There are two ways to start up each process.

  • Startup of individual process

  • Startup of processes along with the service startup

Note

To start a process individually, it is necessary to start the HULFT service in advance.

For details, refer to Startup of the HULFT service.

= Remarks =

Each process cannot be started if the System Environment Settings file (hulenv.cnf) is not recognized.

For details, refer to the following:

HULFT10 for Windows Administration Manual : System Environment Settings file

Startup of individual process

Start each process individually using Process Controller on the HULFT Management Console.

  1. Open the HULFT Management Console.

    For details on how to open the HULFT Management Console, refer to Opening the HULFT Management Console.

    Click Tools > Process Controller.

    Process Controller starts.

    = Remarks =

    The color of the signal for each process indicates the startup or termination status of the process.

    Green indicates that the service is started, yellow indicates that termination is in progress, and red indicates that the service is terminated.

  2. Click Start next to the process you intend to start. The signal turns to green, which indicates that the process is started.

Note

You can use the Scheduler only if the HULFT10 Server grade is installed.

Startup of processes along with the service startup

You can use the System Environment Settings screen to start all the processes along with the startup of the service.

  1. Open the HULFT Management Console.

    For details on how to open the HULFT Management Console, refer to Opening the HULFT Management Console.

  2. Click System Configuration > System Environment Settings.

    The System Environment Settings screen is displayed.

  3. Select the Automatic Process Startup check box of a process to make it start automatically.

= Remarks =

After installation of HULFT, as the default setting, all processes are set to start automatically.