HULFT-29469

The English field name of Operation Log Auto Switch Count in the System Environment Settings is displayed incorrectly

Phenomenon

When you connect to HULFT for IBMi Ver.8.1.0 or later, the English field name of Operation Log Auto Switch Count in the System Environment Settings is displayed and/or output as the field name in versions earlier than HULFT for IBMi Ver.8.4.0.

The field names are as shown below.

  • Field name in HULFT for IBMi Ver.8.4.0 and later

    Operation Log Rotation Count

  • Field name in versions earlier than HULFT for IBMi Ver.8.4.0

    Operation Log Auto Switch Count

Note that if you connect from HULFT Manager Ver.8.4.0 or later to a host that is HULFT Ver.8.0.0 or later but earlier than HULFT Ver.8.4.0, the field name in HULFT Ver.8.4.0 and later is displayed and/or output.

Severity level

D: low

Affected versions

From Ver.8.4.0 to Ver.10.2.0

Modified version

Ver.10.2.1

Condition to reproduce

This phenomenon occurs when the conditions described in Condition set 1 or Condition set 2 below are met.

Condition set 1

This phenomenon occurs on the screen displaying the System Environment Settings when all of the following conditions are met:

  • "ENG" (English) is specified for Language in the HULFT Manager System Environment Settings.

  • You are connected to one of the following:

    • HULFT for IBMi Ver.8.1.0 or later

    • HULFT for IBMi Ver.10.2.0

  • You connect to HULFT for IBMi and display the Security tab on the System Environment Settings screen.

Condition set 2

This phenomenon occurs in the field name in CSV output when all of the following conditions are met:

  • "ENG" (English) is specified for Language in the HULFT Manager System Environment Settings.

  • You specify the following parameters and execute the "mansyscsv" command of the CSV output function:

    • You specify one of the following connect IDs for "-c";

      • HULFT for IBMi Ver.8.1.0 or later

      • HULFT for IBMi Ver.10.2.0

    • You omit "-nt".

    • You specify "env" (System Environment Settings) for "-i".

Alternative workaround

None

Status description

Even if the above conditions are met, the correct field name is displayed.