Host Information (Mainframe)

Detail Information on host on the sending side or the receiving side is registered.

The Host Information is optional. If defaulted, the host name registered in TCP/IP for MVS is specified as the Transfer Group ID in the Send Management Information. Further, the value of the Kanji Code Type is set to 'Shift-JIS' and the value of the JIS Year is '83JIS,' respectively.

Field List

Table 6.11 List of Host Information Fields

Field Name	Default Value	Setting Value	Optional	Remarks
Host Name		Alphanumeric characters, Particular symbols (*1)	-	Within 50 bytes (*6)
Comment		Alphanumeric characters	✓	Within 60 bytes
Host Type	Mainframe	(*2)	-
Kanji Code Type	JEF	(*2)	-
Receive Port No.	30000	From 1 to 65535	✓
Request Acknowledge Port No.	31000	From 1 to 65535	✓
Send Process Multiplex Level by Host	0	From 0 to 100	✓
JIS Year	83JIS	(*2)	-
Connection Type	LAN	(*2)	-
Domain Name		Alphanumeric characters	✓	(*3)
Local Net Proxy Server Name		Alphanumeric characters		Within 50 bytes (*4)
Local Net Proxy Port No.		From 1 to 65535		(*4)
Global Net Proxy Server Name		Alphanumeric characters		Within 50 bytes (*4)
Global Net Proxy Port No.		From 1 to 65535		(*4)
Device Type	Volume Serial	(*2)	(*5)
Volume Serial 1/Device Information 1		Alphanumeric characters	(*5)	(*6)
Volume Serial 2/Device Information 2		Alphanumeric characters	✓	(*6)
Allow Send Request/Resend Request	Yes	(*2)	✓
Allow to View Post-receive Job Result	Yes	(*2)	✓
Allow to Notify Job Result	Yes	(*2)	✓
Allow to Execute Remote Job	Yes	(*2)	✓
Notify User Details	No	(*2)	✓

✓	:	Optional
-	:	Mandatory

*1	:	Hyphen (-), Period (.) However, you cannot specify the Host Name using hyphen (-) in the following programs, because these programs use the symbol to define range: Host Information List Output program (XRHSTLST) Send Log List/File Output program (XRSLOGL) Receive Log List/File Output program (XRRLOGL) Meanwhile, HULFT-HUB may add Underscore (_) to this field in some cases.
*2	:	On screen, select an option.
*3	:	This is not used in HULFT Manager Ver.6 or later.
*4	:	The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.
*5	:	If you select 'SAN(XLD)' for the Connection Type, you cannot default this field.
*6	:	When the host type is zOS, only 'Volume Serial' is enabled for the Device Type.

Explanation of Each Field

The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.

Host Name

The host name to identify the host on the sending side or on the receiving side

This Host Name is linked to the Host Name in the Transfer Group Information.

Comment

The comment related to the host

Host Type

Host type of the above host name

Mainframe:

Mainframe

Linux/UNIX:

Linux/UNIX/NonStop

Windows:

Windows

IBMi:

IBM i

Kanji Code Type

The Kanji code type of the host name mentioned above:

• SHIFT-JIS

• JEF

• EUC

• IBM

• KEIS

• NEC

• UTF-8

Receive Port No.

Receive port number of HULFT

Request Acknowledge Port No.

Request acknowledge port number of HULFT

Send Process Multiplex Level by Host

Send Process Multiplex Level to above host

When you specify '0,' HULFT does not control Send Process Multiplex Level by Host.

Defaulting this field sets '0.'

Make the value of Send Process Multiplex Level by Host not greater than that of Send Startup Task Count in the System Environment Settings.

JIS Year

The JIS year of the Kanji code mentioned above:

78JIS

 

83JIS:

Supports JIS 90 as well

Connection Type

The connection type of the host specified above

LAN:

LAN connection

SAN(FAL):

SAN(FAL) Connection

SAN(XLD):

SAN(XLD) Connection

Local Net Proxy Server Name

Name of server running 'HULFT FireWall' of your network

This is necessary while connecting to 'HULFT FireWall' from the local network.

Note

The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.

Local Net Proxy Port No.

Port number used by 'HULFT FireWall' of the Local Net Proxy Server

This is necessary while connecting to 'HULFT FireWall' from the local network.

Note

The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.

Global Net Proxy Server Name

Name of server running 'HULFT FireWall' of the global network

This is necessary while connecting to HULFT FireWall from the global network (the internet).

Note

The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.

Global Net Proxy Port No.

Port number used by 'HULFT FireWall' of the Global Net Proxy Server

This is necessary while connecting to 'HULFT FireWall' from the global network (the internet).

Note

The value is automatically set by HULFT-HUB system, in the case where you send or receive files via HULFT-HUB Server.

Device Type

This tag is valid if you specify 'SAN(XLD)' for the Connection Type.

• Volume Serial

• Device Information

In the case of HULFT for zOS, the specification of 'Device Information' brings about Data Access Error.

Specify 'Volume Serial' in the case of HULFT for zOS.

Volume Serial 1/Device Information 1

Path to shared volume for transfer

If you specify 'Volume Serial' for the Device Type, the description of the field becomes 'Volume Serial 1,' while if you specify 'Device Information' for the field, the description becomes 'Device Information 1,' respectively.

If you specify 'Device Information' for the Device Type, HULFT specifies Device Number in the case of MSP, while the application specifies Device Name in the case of XSP.

Volume Serial 2/Device Information 2

Path to alternative device if the device specified in the Volume Serial 1/Device Information 1 is not available

If you specify 'Volume Serial' for the Device Type, the description of the field becomes 'Volume Serial 2,' while if you specify 'Device Information' for the field, the description becomes 'Device Information 2,' respectively.

If you specify 'Device Information' for the Device Type, HULFT specifies Device Number in the case of MSP, while the application specifies Device Name in the case of XSP.

Allow Send Request/Resend Request

This field specifies whether to accept the services of Send Request (SEND) and Resend Request (RESEND).

Yes:

Allow the service to be accepted

No:

Refuse the acceptance of the service

Allow to View Post-receive Job Result

This field specifies whether to accept the service of the Post-receive Job Result Inquiry Request (HULJOB).

Yes:

Allow the service to be accepted

No:

Refuse the acceptance of the service

Allow to Notify Job Result

This field specifies whether to accept the service of Job Execution Result Notification (HULSNDRC).

Yes:

Allow the service to be accepted

No:

Refuse the acceptance of the service

Allow to Execute Remote Job

This field specifies whether to accept the service of the Remote Job Execution (HULRJOB).

Yes:

Allow the service to be accepted

No:

Refuse the acceptance of the service

Notify User Details

This field specifies whether to notify the User ID (OS) and the User ID (Management Screen) to the host at connection destination.

Yes:

Notify

No:

Do not notify

For the details on the User ID, refer to Administration Manual.