Receive Detail Information screen
On this screen, you can check details of the Receive log.
Explanation of Each Field
- File ID
-
The File ID registered in the Receive Management Information is displayed.
= Remarks =In the log records for instant transfer, "_INSTANT_TRANSFER_" is displayed as the file ID.
- Send Host
-
The name of the sending host is displayed.
- File Name
-
The name of the Receive file is displayed.
- Receive Date
-
The date on which receiving starts is displayed.
The date is expressed in the format of 'Start time of receiving - End time of receiving.'
= Remarks =The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.
For details on the date format, refer to System Environment Settings screen (Others tab).
- Receive Date (UTC+hh:mm)
-
The date on which receiving starts is displayed in the local time of the machine on which you use HULFT Manager.
The date is expressed in the format of 'Start time of receiving - End time of receiving.'
The offset value shown in 'hh:mm' is aligned with the time zone of the local time.
= Remarks =-
When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to Receive Date (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.
-
The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.
For details on the date format, refer to System Environment Settings screen (Others tab).
-
- Status Code
-
The status code of receiving is displayed.
The code is expressed in the format of 'status code-detail code.'
For more information on the status code and the detail code, refer to Error Codes and Messages on the destination host.
- Interface DBID
-
The Interface DBID registered in the Send Management Information is displayed.
NoteThis field is not displayed when the destination host is HULFT10 for zOS or HULFT10 for IBMi.
- IP Version (ipversion)
-
The IP version that is transmitted is displayed.
- IPv4:
-
Connected at IPv4
- IPv6:
-
Connected at IPv6
- Record Count
-
The number of records of receiving is displayed.
- Record Length
-
The length of records of receiving is displayed. This field is displayed when the destination host is HULFT10 for zOS.
- Data Size
-
The data size of the received file is displayed. The unit is byte.
NoteThis field is not displayed when the destination host is HULFT10 for zOS.
- Transmission Rate
-
The transfer data length per second is displayed. The unit is byte.
- Identifier
-
The identifier that links the Receive Log and the Operation Log is displayed.
- Encryption Used
-
The type of encryption that is used for receiving is displayed.
- -:
-
Transfer does not use ciphers
- AES:
-
HULFT Cipher Option (AES)
- HULFT:
-
HULFT Encryption Scheme
- OTHER:
-
Encryption scheme other than the above
- Transfer ID
-
The unique identifier that is issued for the file transfer is displayed.
This field is displayed when the destination host is HULFT Ver.8.4 or higher.
- Compression Preference
-
The compression preference that is used for the transfer is displayed.
This field is displayed when the destination host is HULFT Ver.8.4 or higher.
- None:
-
Transfer data without using compression
- Horizontal:
-
Transfer data using horizontal compression (compression within records)
- Vertical:
-
Transfer data using vertical compression (compression across records)
- DEFLATE:
-
Transfer data using DEFLATE compression
- Zstandard:
-
Transfer data using Zstandard compression
When a log file for a lower version is converted, "---" is displayed.
- Connection Type
-
The mode of connection to the sending host is displayed.
- LAN:
-
LAN Connection
NoteThis field is not displayed when the destination host is HULFT10 for IBMi.
- Volume Serial
-
The volume serial number for the Receive file is displayed. This field is displayed when the destination host is HULFT10 for zOS.
- UNIT
-
The name of the unit that stores the Receive file is displayed. This field is displayed when the destination host is HULFT10 for zOS.
- Job No.
-
The job number is displayed. This field is displayed when the destination host is HULFT10 for IBMi.
- Comment
-
The comment that is registered in the Receive Management Information for the transfer is displayed.
This field is displayed when the destination host is HULFT Ver.8.4 or higher.
- Job
- Message
-
-
Case where Post-receive Job is executed
The job execution log is displayed in Receiving Side Job Status. For details, refer to Case where Post-receive Job is executed.
-
Case where message is used
The contents are displayed in Message. For details, refer to Case where message is used.
-
- Description
-
The description of the error is displayed.
- Measure
-
The measure for the error is displayed.
Case where Post-receive Job is executed
When the Post-receive Job is executed, the job execution log is displayed in Receiving Side Job Status.
Explanation of Each Field
- Job Execution Date
-
The date on which the job that was last executed is displayed.
= Remarks =The date format varies depending on the date format that is specified in the System Environment Settings for HULFT Manager.
For details on the date format, refer to System Environment Settings screen (Others tab).
- Job Name
-
The name of the job that is activated after completion of Receive processing is displayed.
- Start Time
-
The time when the job starts is displayed.
- End Time
-
The time when the job ends is displayed.
- Start Time (UTC+hh:mm)
-
The time when the job starts is displayed in the local time of the machine on which you use HULFT Manager.
The offset value shown in 'hh:mm' is aligned with the time zone of the local time.
= Remarks =When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to Start Time (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.
- End Time (UTC+hh:mm)
-
The time when the job ends is displayed in the local time of the machine on which you use HULFT Manager.
The offset value shown in 'hh:mm' is aligned with the time zone of the local time.
= Remarks =When the destination host is HULFT for MSP or HULFT for XSP, the field name is changed to End Time (GMT+hh:mm) and the date and time that are recorded in Greenwich Mean Time are displayed in local time.
- Message ID
-
The message ID when the job is completed is displayed. This field is displayed when the destination host is HULFT10 for IBMi.
- Severity
-
The severity of the message when the job is completed is displayed. This field is displayed when the destination host is HULFT10 for IBMi.
- Status
-
The completion status of the job is displayed.
- 0:
-
Successful end
- Other than 0:
-
Unsuccessful end (the exit status of the startup job)
Regarding the Receiving Side Job Status, if the status code is '0,' successful job execution is displayed and, if the status code is other than '0,' unsuccessful job execution information is displayed.
When the sending job is not executed as there is no entry of the Job ID in the Job Information or due to a definition error in the Job Information, Start Time and End Time of Receiving Side Job Status are '9.'
Case where message is used
When the message is used, the contents are displayed in Message. When no value is specified, it is displayed as blank.
Explanation of Each Field
- Message 0 to Message 5
-
The message that is received from the source is displayed.
- Long Message 0 to Long Message 1
-
The long message that is received from the source is displayed.