List of Transfer Group Information fields

You can group transfer destinations (remote hosts) and register those groups.

The maximum number of host names that you can specify per transfer group is 1000.

For the registration method, refer to Using the Transfer Group Information.

Field List

Table 4.30 List of Transfer Group Information Fields

Field Name	Default Value	Setting Value	Optional	Remarks
Transfer Group ID		Alphanumeric characters and "_"	-	Within 50 bytes
Comment		Alphanumeric characters, half-width kana	✓	Within 60 bytes
Host Name		Alphanumeric characters, particular symbols (*1)	-	Within 50 bytes

✓	:	Optional
-	:	Mandatory

*1

:

Only hyphens (-) and periods (.) can be set. However, you cannot specify a host name that contains a hyphen (-) for the target host of the following programs: Output Host Information List program (XRHSTLST) Output Send Log List program (XRSLOGL) Output Receive Log List program (XRRLOGL) This is because a hyphen (-) is used for range specification when a host name is specified for the above programs. When you use HULFT-HUB, HULFT-HUB may set a host name with an underscore (_). HULFT-HUB uses the host name with an underscore (_) to manage HULFT. You cannot use an underscore (_) in a host name for transfer.

Explanation of each field

This section explains the fields to be specified in the Transfer Group Information.

Transfer Group ID

ID used to identify the sending or receiving host.

This transfer group ID is associated with Transfer Group ID in the Send Management Information and the Receive Management Information.

Comment

Comment for the transfer group

Host Name

Name of the remote host for sending or receiving

Points to be noted when configuring settings

Behavior when multiple hosts are registered