List of Host Information fields
You can register detailed information about the host on the sending side or the receiving side. For the registration method, refer to Using the Host Information.
The Host Information is optional. If this information is omitted, the host name registered on Communications Server is specified as Transfer Group ID in the Send Management Information. In addition, the value of Code Set for Transfer (KCODETYPE) is set to 'Shift-JIS' and the value of Standard for Japanese is set to '83JIS.'
Field List
|
Field Name |
Default Value |
Setting Value |
Optional |
Remarks |
|
|---|---|---|---|---|---|
|
|
Alphanumeric characters, particular symbols (*1) |
- |
Within 50 bytes |
||
|
|
Alphanumeric characters, |
✓ |
Within 60 bytes |
||
|
Basic Settings |
|||||
|
|
Mainframe |
(*2) |
- |
|
|
|
JEF |
(*2) |
- |
|
||
|
30000 |
1–65535 |
✓ |
|
||
|
31000 |
1–65535 |
✓ |
|
||
|
0 |
0–100 |
✓ |
|
||
|
83JIS |
(*2) |
- |
|||
|
LAN |
(*2) |
✓ |
|
||
|
Disabled |
(*2) |
- |
|
||
|
Proxy Server |
|||||
|
|
|
|
|
(*3) |
|
|
40000 |
|
|
(*3) |
||
|
Security |
|||||
|
|
Yes |
(*2) |
✓ |
|
|
|
Yes |
(*2) |
✓ |
|
||
|
Yes |
(*2) |
✓ |
|
||
|
Yes |
(*2) |
✓ |
|
||
|
No |
(*2) |
✓ |
(*4) |
||
|
No |
(*2) |
✓ |
|
||
|
✓ |
: |
Optional |
|
- |
: |
Mandatory |
|
*1 |
: |
Only hyphens (-) and periods (.) can be set. HULFT-HUB may add an underscore (_) to this field in some cases. However, you cannot specify the Host Name using hyphen (-) in the following programs, because these programs use the symbol to define range: Host Information List Output program (XRHSTLST), Send Log List/File Output program (XRSLOGL), and Receive Log List/File Output program (XRRLOGL) |
|
*2 |
: |
For the HULFT Manager Management Console, click a setting value on the pulldown list. |
|
*3 |
: |
This field is set when HULFT-HUB or HULFT-WebConnect is used. Do not modify the setting of the field in HULFT Manager. |
|
*4 |
: |
This field is displayed when HULFT Manager connects to HULFT Ver.8.4 or higher. |
Explanation of each field
This section explains the fields to be specified in the Host Information.
- Host Name
-
Host name to identify the host on the sending side or on the receiving side
At the time of sending, this host name is associated with the host name of the Transfer Group Information.
At the time of receiving, this host name is associated with the local host name of the host on the sending side.
- Comment
-
Comment for the host
Basic Settings
- Host Type
-
Type of operating system for the host specified for Host Name
- Mainframe:
-
Mainframe
- Linux/UNIX:
-
Linux/UNIX/NonStop
- IBMI:
-
IBM i
- Windows:
-
Windows
- Code Set for Transfer (KCODETYPE)
-
Character code for the host that is specified for Host Name
-
SHIFT-JIS
-
JEF
-
EUC-JP
-
IBM Kanji
-
UTF-8
-
GB18030
-
IBM Simplified Chinese
-
- Receive Port No.
-
Receive Port No. for the host that is specified for Host Name
Omitting this field sets it to '30000.'
- Observe Port No.
-
Observe Port No. for the host that is specified for Host Name
Omitting this field sets it to '31000.'
- Send Process Multiplex Level by Host
-
Send Process Multiplex Level for the host that is specified for Host Name
When you specify '0,' HULFT does not control Send Process Multiplex Level by Host.
Omitting this field sets '0.'
Set this field to a value that is equal to or lower than the setting value of Send Startup Task Count (TASKCNT) in the System Environment Settings.
- Standard for Japanese
-
JIS Year of the character code that is specified for Code Set for Transfer (KCODETYPE)
- 78JIS:
-
JIS78
- 83JIS:
-
JIS83
- Connection Type
-
Connection type for the host specified in Host Name
- LAN:
-
Specify when using a LAN connection
Only 'LAN' can be set.
- Use HULFT7 Comm. Mode
-
Communication method for the host that is specified for Host Name
- Disabled:
-
HULFT first uses the communication method for HULFT10 to connect to the remote host. If the remote host uses a lower version, HULFT switches to the communication method for HULFT7.
- Enabled:
-
HULFT uses the communication method for HULFT7 from the beginning.
Omitting this field sets 'Disabled.'
Proxy Server
- Proxy Server
- Proxy Port No.
-
This field is set when HULFT-HUB or HULFT-WebConnect is used.
In HULFT Manager, do not modify the settings of the fields that are displayed for Proxy Server.
Security
- Allow Send Request/Resend Request
-
Specify whether to accept the services of the Send Request (SEND) and the Resend Request (RESEND).
- Yes:
-
Accept the services
- No:
-
Refuse to accept the services
Omitting this field sets 'Yes.'
- Allow to View Post-receive Job Result
-
Specify whether to accept the service of the Post-receive Job Result Inquiry Request (HULJOB).
- Yes:
-
Accept the service
- No:
-
Refuse to accept the service
Omitting this field sets 'Yes.'
- Allow to Notify Job Result
-
Specify whether to accept the service of the Job Execution Result Notification (HULSNDRC).
- Yes:
-
Accept the service
- No:
-
Refuse to accept the service
Omitting this field sets 'Yes.'
- Allow to Execute Remote Job
-
Specify whether to accept the service of the Remote Job Execution (HULRJOB).
- Yes:
-
Accept the service
- No:
-
Refuse to accept the service
Omitting this field sets 'Yes.'
- Allow Instant Transfer
-
Specify whether to accept requests for instant transfer from the host specified for Host Name.
This field is displayed when the destination host is HULFT Ver.8.4.0 or higher.
- Yes:
-
Accept the requests for instant transfer
- No:
-
Refuse the requests for instant transfer
Omitting this field sets 'No.'
- Notify User Details
-
Specify whether to notify the user ID (operating system) and the user ID (HULFT Management Console) to the host at the connection destination.
-
Yes
-
No
For details on user IDs, refer to the explanation of the Notify User Details in Administration Manual for the destination host.
Omitting this field sets 'No.'
-