System Environment Settings list

The fields of the System Environment Settings displayed on the System Environment Settings screen are classified as follows:

Note

You can use the Scheduler only if the HULFT10 Server grade is installed.
You can specify the Shared Settings by HULFT if HULFT10 Server grade is installed.

Table 4.66 System Environment Settings List
Field Name		Tag Name	Default Value	Setting Value	Remarks
Startup
	Work File Generation Path	tmpdir	.	Characters	Within 200 bytes
	Service Port No.	srvport	31001	1–65535
	Command Acknowledge Port No.	sddport	32000	1–65535
	Receive Port No.	rcvport	30000	1–65535
	Observe Port No.	obsport	31000	1–65535
	Service Process Port No.	srvcprocport		1–65535 or no specification
	Scheduler Port No.	schport		1–65535 or no specification
	Send Process Multiplex Level	sndpsnum	10	1–999
	Receive Process Multiplex Level	rcvpsnum	999	1–999
	Automatic Process Startup	autostart	All selected	(*1)
	Process Auto Reboot Max. Count	procrestartcnt	0	0–99
	Process Auto Reboot Retry Interval	procrestarttime	60	0–99
	Account Name	-		Characters
	Domain Name	-		Half-width characters	Within 64 bytes
	Password	-		Half-width characters
Code Conversion
	Code Set for Transfer	cs4trnsfr	Value set during installation	(*2)
	Standard for Japanese	jistype	83JIS	(*2)
	JIS Year	jistype	83JIS	(*2)
	Tab Code Mode	tabchange	Space	(*2)
	Use Custom Character Table	gaijifile	Off	(*2)
	Handling of Unregistered Custom Characters	gaijierr	Default Value	(*2)
	Code Conversion Mode	codechangemode	Mode 0	(*2)
	Pack Zone Conversion	pschg	Mode 0	(*2)
	Sign for ASCII	psascii	Mode 1	(*2)
	Sign for EBCDIC	psebcdic	Mode 1	(*2)
	X Type Conversion	xmode	Mode 0	(*2)
	Instant Transfer Code Converting Side	insttranscodcnv	Receiving Side	(*2)
Send and Receive
	Encryption Scheme	ciphertype	(*3)	(*2)
	Receive Ready Notification	rcvcmd	No	(*2)
	Send Unit Selection	sndpsend	Before Starting Subsequent Job	(*2)
	Transfer Group Check	tgrpchk	No	(*2)
	Retry Count on Locked Send File	lockcnt	0	0–99999
	Retry Interval on Locked Send File	locktime	0	0–99999
	Retry Count on Locked Receive File	rretrycnt	0	0–99999
	Retry Interval on Locked Receive File	rretrytime	0	0–99999
	Retry Count on Send File	sretrycnt	10	0–99999
	Retry Interval on Send File	sretrytime	1	0–99999
	Dynamic Parameter Specification	dynparam	Enable Dynamic Specification	(*2)
	Message Dynamic Parameter Specification	msgdynparam	Always Replace Messages and Variables	(*2)
	Receive Multiplex Level Over Retry	rcvover_rty	Do Not Retry, and Give Error:	(*2)
	Send Transfer Error Recovery	enderrmode	As Successful End	(*2)	(*4)
	Criteria to Delete Resend Queue	resenddel	Mode 1	(*2)
	Receive File Max. Size	rcvmaxfilesize	(*5)	1 or more (*5)	Bytes
	Clear Unsent File	delreqcpfile	Yes	(*2)	(*6)
	Clear Resend Queue File	delresendfile	Yes	(*2)	(*6)
	Receive File Lock Standby	rcvfilelockwait	Wait	(*2)
	Compression Type Selection	comp_selection	C	(*2)
	Local Host Name	myhostname			Within 68 bytes
Communication
	Connect Retry Count	retrycnt	10	0–99999
	Connect Retry Interval	retrytime	1	0–99999
	Auto Resend Retry Count	sockerr_autoretry	0	0–9
	Socket Read Timeout	socktime	3600	10–259200
	Socket Buffer Size for Data Sending	sndsocksize	0	0,4096–2147483647
	Socket Buffer Size for Data Receiving	rcvsocksize	0	0,4096–2147483647
	Service Connect Timeout	srvtime	3600	1–65535
	HULFT Manager Timeout	admsocktime	3600	10–259200
	IP Version	ipversion	4	(*2)
	Queue of Pending Connect	listen	50	1–512
	Framed Message Transfer Type	proctranstype	Send and Receive Speed Priority Mode	(*2)
Security
	Management Screen Security	admcheck	Disabled	(*2)
	Password Check	password	No	(*2)
	Allow Send/Resend Request from Unregistered Host	allowsndreq	Yes	(*2)
	Allow Post-receive Job Result Inquiry from Unregistered Host	allowpostrjobrslt	Yes	(*2)
	Allow Job Result Notification Request from Unregistered Host	allowjobrsltntfy	Yes	(*2)
	Allow Remote Job Execution Request from Unregistered Host	allowrmtjobexe	Yes	(*2)
	Allow Instant Transfer from Unregistered Host	allowinsttrans	No	(*2)
	Instant Transfer Receive Root Directory	insttransroot	"itr" directory sibling of HULPATH	Characters	Within 200 bytes
	Forced Strong Key Mode	strongkeymode	Disabled	(*2)
	Transfer-Related File Deletion Mode	trnsfr_file_del	0	(*2)
Global
	Date Format	datefmt	YMD	(*2)
	HULFT Operation Language	hullang	Value set during installation	(*2)
Transfer Test
	Transfer Preference	ttmode	Test-priority Mode	(*2)
	Result Handling of Receiving	ttrcvomit	Handle As Unsuccessful End	(*2)
	Output Receive File	ttrcvfiloutput	No	(*2)
	Execute Pre-send Job	ttpresndjob	No	(*2)
	Execute Post-send Job	ttsndjob	No	(*2)
	Execute Post-receive Job	ttrcvjob	No	(*2)
	Output Results to Transfer Logs	ttsndrcvlog	Yes	(*2)
Logs
	Log Rotation Record Count	logdelcount	0	0–999999
	Console Log Size	logsize	999999	1024–102400	999999: unlimited
	Output to Event Logs	eventlog	Not selected	(*1)
	Output to Console Logs	consolelog	All selected	(*1)
	Console Log Backup	backuplog	Yes	(*2)
	Operation Log Output Option	oplselect	No	(*2)
	Operation Log User-specified Character	oplcharacter		Alphanumeric characters	Within 8 bytes
	Operation Log User ID Output Format	opluseridtype	Down Level Log-on Name	(*2)
	Operation Log Rotation Size	oplchangesize	0	0–9999	0: unlimited
	Operation Log Generations	oplgenerationcount	9999	2–9999
	Log Size Reduction Mode	logreduction	Output full log	(*2)
	Log Output Version	logver	V8.4 Header	(*2)
Others
	Job Timeout	jobwtimeout	999999	10–259200	999999: unlimited
	Transfer Status Transfer Count	disptranscnt	100	1–100
	Observe Log Output	-	All selected	(*1)
	Status Display Selection	statusdisplay	Display All	(*2)
	HULFT Script Port No.	hsport	(*8)	1–65535
Shared Settings by HULFT
	Path to Location for Cross-Product Sharing	hulsharepath		Characters	Within 200 bytes
	Local File Lock Mode	localfile_lockmode	Mode 0	(*2)
Scheduler
	Weekly Non-working Days	weekoff	Sunday, Saturday	(*1)
	Include Holidays in Non-working Days	holiday	Marked	(*1)
	Scheduling Time	schtime	0	0–23
	Schedule Process Multiplex Level	schnum	50	1–999
	Designated Non-working days	-
	Holidays	-	(*7)
Mail Interface
	Mail Account Name	User		Alphanumeric characters	Within 30 bytes
	Mail Server Host Name	MailHost		Alphanumeric characters	Within 68 bytes
	SMTP Port No.	SmtpPort		1–65535
	Full Name	FullName		Alphanumeric characters	Within 30 bytes
	Domain Name	DomainName		Alphanumeric characters	Within 64 bytes
Clustering
	Management Information Duplication	adjoinadminfile	Yes	(*2)	(*6)
	Processing Status Output and Event Log	alertmsgput	Yes	(*2)	(*6)
	Processing Status Storage File Count	consolelogcnt	10000	100–1000000
	Sync Start with Service	startsync	Do Not Sync	(*2)

*1	:	For the HULFT Manager Management Console, select the check box.
*2	:	For the HULFT Manager Management Console, click a setting value on the pulldown list.
*3	:	The default value is 'HULFT Encryption Scheme' when HULFT product configuration on the destination host includes HULFT Cipher Option, and 'Other Encryption Scheme' when HULFT product configuration does not include HULFT Cipher Option. However, if you added HULFT Cipher Option or changed the type of HULFT Cipher Option by updating the Product Key, the default value is not changed. For details, refer to Installation Manual for the destination host.
*4	:	'As Successful End' is set for new installation.
*5	:	9,223,372,036,854,775,808 (The 63rd power of two)
*6	:	The default value is 'Duplicate' or 'Output' for HULFT10 Server grade.
*7	:	Refer to Scheduler Manual for the destination host.
*8	:	HULFT Script Port No. (hsport) has no default value. If DataSpider Servista is installed, specify a port number for HULFT Script Port No. (hsport).