System Environment Settings list
The fields of the System Environment Settings displayed on the System Environment Settings screen are classified as follows:
You can specify the Shared Settings by HULFT if HULFT10 Enterprise grade is installed.
|
Field Name |
Tag Name |
Default Value |
Valid Value |
Remarks |
|
|---|---|---|---|---|---|
|
Startup |
|||||
|
|
tmpdir |
Value set during installation |
|
Within 200 bytes |
|
|
sddrequestmethod |
Normal socket |
(*1) |
(*2) |
||
|
fifopath |
Value set during installation |
|
Within 200 bytes (*3) |
||
|
sddport |
32000 |
1–65535 |
|
||
|
rcvport |
30000 |
1–65535 |
|
||
|
obsport |
31000 |
1–65535 |
|
||
|
sndpsnum |
10 |
1–9999 |
|
||
|
rcvpsnum |
0 |
0–9999 |
0: unlimited |
||
|
piddir |
Value set during installation |
|
Within 200 bytes |
||
|
Code Conversion |
|||||
|
|
cs4trnsfr |
Value set during installation |
(*1) |
(*4) |
|
|
knjcode |
Value set during installation |
(*1) |
(*5) |
||
|
jistype |
83JIS |
(*1) |
(*4) |
||
|
jistype |
83JIS |
(*1) |
(*5) |
||
|
tabchange |
Space |
(*1) |
|
||
|
gaijifile |
No |
(*1) |
|
||
|
gaijierr |
Default Value |
(*1) |
|
||
|
codechangemode |
Mode 0 |
(*1) |
|
||
|
insttranscodcnv |
Receiving Side |
(*1) |
(*2) |
||
|
Attribute Conversion |
|||||
|
|
pschg |
Mode 0 |
(*1) |
|
|
|
psascii |
Mode 1 |
(*1) |
|
||
|
psebcdic |
Mode 1 |
(*1) |
|
||
|
xmode |
Mode 0 |
(*1) |
|
||
|
Send and Receive |
|||||
|
|
ciphertype |
(*6) |
(*1) |
|
|
|
rcvfilewait |
Mode 1 |
(*1) |
|
||
|
rcvover_rty |
Do Not Retry, |
(*1) |
|
||
|
tgrpchk |
No |
(*1) |
|
||
|
dynparam |
Enable Dynamic Specification |
(*1) |
|
||
|
msgdynparam |
Always Replace Messages and Variables |
(*1) |
|
||
|
enderrmode |
As Unsuccessful End |
(*1) |
|
||
|
resenddel |
Mode 1 |
(*1) |
|
||
|
rcvmaxfilesize |
0 |
0 or more (*7) |
0: unlimited |
||
|
myhostname |
The name of host you specified when you install HULFT |
|
(*8) |
||
|
comp_selection |
C |
(*1) |
|
||
|
Communication |
|||||
|
|
retrycnt |
5 |
0–9999 |
|
|
|
retrytime |
20 |
0–9999 |
|
||
|
sockerr_autoretry |
0 |
0–9 |
|
||
|
socktime |
3600 |
10–259200 |
999999: unlimited |
||
|
sndsocksize |
0 |
0,4096–2147483647 |
|
||
|
rcvsocksize |
0 |
0,4096–2147483647 |
|
||
|
obssocktime |
86400 |
10–259200 |
999999: unlimited |
||
|
ipversion |
4 |
(*1) |
|
||
|
proctranstype |
Send and Receive Speed Priority Mode |
(*1) |
|
||
|
Security |
|||||
|
|
admcheck |
Disabled |
(*1) |
|
|
|
passwdcheck |
No |
(*1) |
|
||
|
oplselect |
No |
(*1) |
|
||
|
oplchangesize |
0 |
0–9999 |
0: unlimited |
||
|
oplgenerationcount |
9999 |
2–9999 |
|
||
|
strongkeymode |
Disabled |
(*1) |
(*2) |
||
|
trnsfr_file_del |
0 |
(*1) |
|
||
|
allowsndreq |
Yes |
(*1) |
(*2) |
||
|
Allow Post-receive Job Result Inquiry from Unregistered Host |
allowpostrjobrslt |
Yes |
(*1) |
(*2) |
|
|
Allow Job Result Notification Request from Unregistered Host |
allowjobrsltntfy |
Yes |
(*1) |
(*2) |
|
|
allowrmtjobexe |
Yes |
(*1) |
(*2) |
||
|
allowinsttrans |
No |
(*1) |
(*2) |
||
|
insttransroot |
"itr" directory sibling of HULPATH |
|
Within 200 bytes (*2) |
||
|
Global |
|||||
|
|
datefmt |
Value set during installation |
(*1) |
|
|
|
hullang |
Value set during installation |
(*1) |
|
||
|
Transfer Test |
|||||
|
|
ttmode |
Test-priority Mode |
(*1) |
|
|
|
ttrcvomit |
Handle As Unsuccessful |
(*1) |
|
||
|
ttrcvfiloutput |
No |
(*1) |
|
||
|
ttpresndjob |
No |
(*1) |
|
||
|
ttsndjob |
No |
(*1) |
|
||
|
ttrcvjob |
No |
(*1) |
|
||
|
ttsndrcvlog |
Output |
(*1) |
|
||
|
Others |
|||||
|
|
utlwait |
60 |
10–259200 |
999999: unlimited |
|
|
jobwtimeout |
999999 |
10–259200 |
999999: unlimited |
||
|
logdelcount |
0 |
0–999999 |
|
||
|
statusdisplay |
Display All |
(*1) |
|
||
|
hulcharacter |
|
Alphanumeric characters |
Within 8 bytes |
||
|
hsport |
(*9) |
1–65535 |
(*10) |
||
|
tlogver |
Output the Trace Log (V8 header) |
(*1) |
|
||
|
tlogmode |
Output Only Unsuccessful Log Records |
(*1) |
(*3) |
||
|
logreduction |
Output full log |
(*1) |
(*2) |
||
|
tracelog |
Only "Error" is selected |
(*11) |
(*2) |
||
|
syslog |
Not selected |
(*11) |
(*2) |
||
|
tlogfile |
HULPATH/trace |
|
Within 256 bytes |
||
|
tlogsize |
10 |
1–1024 |
|
||
|
Shared Settings by HULFT |
|||||
|
|
hulsharepath |
HULPATH |
|
Within 200 bytes |
|
|
localfile_lockmode |
Mode 0 |
(*1) |
|
||
|
*1 |
: |
For the HULFT Manager Management Console, click a setting value on the pulldown list. |
|
*2 |
: |
These fields are displayed when HULFT Manager connects to HULFT Ver.8.4 or higher. |
|
*3 |
: |
These fields are displayed when HULFT Manager connects to HULFT lower than Ver.8.4. |
|
*4 |
: |
This field is displayed when HULFT Manager connects to HULFT Ver.8.1 or higher. |
|
*5 |
: |
This field is displayed when HULFT Manager connects to HULFT lower than Ver.8.1. |
|
*6 |
: |
The default value is 'HULFT Encryption Scheme' when HULFT product configuration on the destination host includes HULFT Cipher Option, and 'Other Encryption Scheme' when HULFT product configuration does not include HULFT Cipher Option. However, if you added HULFT Cipher Option or changed the type of HULFT Cipher Option by updating the Product Key, the default value is not changed. For details, refer to Installation Manual for the destination host. |
|
*7 |
: |
9,223,372,036,854,769,999 |
|
*8 |
: |
There is no default value for HULFT for NSK. |
|
*9 |
: |
If HULFT product configuration on the destination host includes DataSpider Servista, the value is '7700'. If the configuration does not include DataSpider Servista, the value is not set. |
|
*10 |
: |
This field is displayed only if you install DataSpider Servista on the destination host. |
|
*11 |
: |
For the HULFT Manager Management Console, select the check box. |
|
*12 |
: |
|