Copy

The procedure for copying the File Trigger Information is as follows:

Procedure when directly specifying an ID on the System Configuration screen

  1. On the System Configuration screen, select "8. File Trigger Information."

    Enter the ID you intend to copy for the field of ID or Host Name and press the Enter key.

    The File Trigger Information Update screen displays the content that is already registered.

  2. Press the "Ctrl+p" on the File Trigger Information Update screen.

    The ID set for Trigger ID is cleared and input in that field is enabled.

  3. Enter a new ID.

  4. Once input is complete press the Enter key.

    The record is copied with the entered contents, and the System Configuration screen is displayed.

Note

When you are editing information on the Update screen and you want to stop copying a record in the File Trigger Information and return to the System Configuration Menu screen, press the Esc key.

Procedure when specifying an ID on the File Trigger Information List screen

  1. On the System Configuration screen, select "8. File Trigger Information."

    Press the Enter key without entering anything in the field of ID or Host Name.

    The File Trigger Information List screen is displayed.

    = Remarks =

    The File Trigger Information List screen is not displayed if there is no registered file trigger ID.

  2. Enter the ID that you intend to copy and press the Enter key.

    The File Trigger Information Update screen displays the content that is already registered.

  3. Press the "Ctrl+p" on the File Trigger Information Update screen.

    The ID set for Trigger ID is cleared and input in that field is enabled.

  4. Enter a new ID.

  5. Once input is complete press the Enter key.

    The record is copied with the entered contents, and the System Configuration screen is displayed.

Note

When you are editing information on the Update screen and you want to stop copying a record in the File Trigger Information and return to the System Configuration Menu screen, press the Esc key.

For details on the screen, refer to File Trigger Information List screen.